fiestaturbo.com

[White2i]

thought it was about time i put some pics of my car up and tell every1 a bit about it.






hope people like it, got some plans for it but i thinking of buying another car to do and leave this as it is.

spec

xr2i 8v

engine

bored to 1.7
full race head
steel bottom end
high comp pistons
custom cam
ashley 4-2-1 manifold
mongoose straight throught system
air filter
chip and live map
up-ed rev limiter
ap 4 paddle clutch

suspension

H&R coilovers
polybushed
team dynaics alloys

interior

install
recaro front seats
mk4 fiesta rear seats

think thats it but got some stuff on order for it.

car been rolling roaded at 138bhp at the wheels and made over 200 lb/ft

[adz]

tidy mate, looks nice

what you got planned for it?

personally id get the bumper strips done in black, and ditch the rear lights, other than that i really like how it looks

[TomRS1800]

Engine and bodywork looks sweet

Loose those rear lights and get some Euro style ones! Loose the gash wing mirrors

[doggpk]

bin the rear lites n mirrors. plizzz.otherwise car looks wicked...

[White2i]

well i not sure on lossing mirrors but its a good idea but rear lights staying as it something that not been done before once some1 copies them if they do then they well go,

cheers for all the moments tho,

well it mite b staying as it is and i mite be buying another fiesta to do.

if i eep it get it resprayed and get strut braces front and back and leave it there i think.

[Superal]

Very nice...sweet spec too...done any runs in it

[White2i]

dont down the strip yet , i got problems anyway i done 9k in it with the new ap 4 paddle clutch and its starting to slip and i need to get my s2 rst box in it asap [ERRR] it torque steers all over the road at the moment, but had the 0-60 timed, with interior and 2x10"subs, 6x9's , amp , faulse floor in boot and 1 passenger and my tool kit and it did a 6.1sec with that lot in so will strip it out and do another run soon down the strip but i only had me liecense since may so i only jus started reli

[PMK3]

what a gayboys car! this car goes like s**t of a broom handle.after the little go in it im completely sold on coilovers now,love it marc

[Oranoco]

Looks nice. God I miss my old 2i

[White2i]

what a gayboys car! this car goes like poo of a broom handle.after the little go in it im completely sold on coilovers now,love it marc

cheers m8, i same i dont like driving a car without coilovers know [ERRR] it just dont feel rite, they not that bumpy either.

still gotta do 1 more engine mod to it to finish it of and the get it remapped and should unlock alot more power i hope.

i will take you out in it shortly for a proper drive m8

[PMK3]

still gotta do 1 more engine mod to it to finish it of and the get it remapped and should unlock alot more power i hope.

i will take you out in it shortly for a proper drive m8

safe mate,should be ordering my coilovers end of the month

what you got left to do?

[White2i]

sweet as m8 wot 1's you getting then?

well got two options for it reli , by full throttle bodies and aftermarket management , or fit a cosworth throttle body to it.

but still wana build a zvh for it though.

[TIL13R]

Like the spec of the engine but seems underpowered to me! 138??

that spec i would of thought about 150?

Tiller

[White2i]

well thats at the wheels m8 its got 153bhp at the flywheel, but i dont do flywheel power its the power at the wheels that counts.

it is a bit i think but it needs to get more air into it, so thats y i am thinking of putting cossie throttle body or doing throttle bodies and aftermaret ecu, but i not sure which route to go.

[Superal]

Bet you pull a few surprises on the roads in that....bit of an undercover weapon

[White2i]

yea done a few nice cars mate but normally only to about 110mph then they catch up [ERRR] mine runs out of pulling power , lol.
done audi tt quartros, db9 has to be the best so far, but other hot hatchs seem to be easy to bet apart from 1 frst so far that bet me thats bout all that has got me.

was beta in march when was driving it on l plates but has all the engine and suspension mods done to it, reli did embaress ppl then.

[PMK3]

R1 throttle bodies ,nuff said.oredring GAZ coilovers matey.and sort that fuckin "install" out

[White2i]

yea i keep forgeting that but i will get the install sorted as soon a get some cash to come over urs m8.

yea sounds gd bike throttle bodies but i jus gotta find a enginemanagement system that will run them m8.

[PMK3]

cool,im sure you'll get something sorted ecu wise.the parts are ready and waiting

[White2i]

nice 1 m8 , sure i will sort ecu out

[White2i]

right heres some updated pics of my car i have been tidying up the engine bay and fitty strut brace.

[PMK3]

must of missed this when you posted it mate,looking good.I know you've had the various problems with it over the last few weeks but you'll get it sorted.I spose you'd best had build that new engine for it just to keep up bud

[White2i]

right there here goes havent updated this for a while, so thought i would update and let you all know what has been going on, well 8weeks ago my wheel bearing let go in a big way on the dual carriage way and it has damaged, hub, drive flange, and driveshaft. the gearbox was getting bad the syncro's were going on 2nd and 3rd gear and had an oil leak from crank and sump. so thought while its of the road i might as well overhaul the whole lot.

anyway heres some pics from what i did last week on my weeks holiday









the old gearbox


the heaps of parts i took off the car





my scrap and rubbish heap which by the end of the week was 4 times the size



on wednesay i started to put it back together with new parts












and then thursday i spend doing all the silly little bits i have been meaning to do for a long time and fitted the braided brake lines

















the car has got a bit further since but always forget the camera so will get some more updates soon, but still cant finish the car yet, paid a mate for driveshafts, hubs and drive flanges from his FRST he breaking and i been waiting 11weeks for him to get them of the car, so if anyone who reads this and lives in ipswich area if you get spare driveshafts, hubs and drive flanges let me know, also need a good gearselector.

cheers for reading the essay hope it aint to painful

[PMK3]

good progress mate,keep on at tkeith for the bits and im sure he'll sort it out.have to take me out in it with its full potential

[White2i]

yeah i know mate i been on at him but he not interested i mean he dont seem to care if i have then this year or next year,

yeah defently take you out for a spin when i get it sorted and all back together when ever that will be

[PMK3]

why aint keith bothered ,Ask for you 50 notes back see if that perks him up.

[White2i]

i will be mate i am giving him till next week to sort out the cost of postage as he said he was going to deliever as i delievered his bits to him last time, but he want to post them at my expense but its taing him for ever he said to day he will get round to it when he can, like theres no rush but there is i want my car back on the road