fiestaturbo.com

[heeman10]

Open to offers on many parts now.

I am breaking my Mk3 Zetec Turbo Fiesta, with all parts up for grabs. I am now operating a policy of "if you want the parts, give me the money", with no "dibs". If you want parts, let me know and we'll arrange a time for you to collect them. If someone else gets their first, they'll get the parts. Too many people messing me around I'm afraid.

Please indicate your interest in parts by replying to this thread, not via PMs. I would only like PMs from people interested in buying the engine package. I am trying to be fair to everyone, but it is hard to do so unless all interest is shown publicy in this thread. Thank you


Engine, tubular manifold, turbo, ECU (live mapped by MSD complete with chip), loom and sensors: please PM me about the engine if you are serious. Price will be over £1,200, so please don't PM me if that is out of your reach
Shell, a smidge over 100,000 IIRC, one patch on nearside rear sill, diesel shell means no cat required by VOSA! £150
Escort RS2000 rear disc brakes and handbrake cable: £125
Escort Mk5 master cylinder and servo: £50 - RS_seg
Modified FRST front bumper with enlarged opening and smoothed bumper strip: £60
FRST arches and sideskirts (no studs): £50ono
Escort GTI 15" wheels. Two with old Kumhos one, two with Toyo R888s. I actually have 6. Around £250 dependent on what you want!
Custom made central gauge pod, houses 52mm gauge and ACT gauge: £30
Central locking mechanisms: £30
Armtech rev limiter/launch control/flat shift module: £50 - Rhinopower
Black centre console: £20
Black dash: £30
Clifford Concept 650 alarm: £150
RS accessory replica rear lights ("Rawli lights"): £50
Full Mongoose 64.5mm stainless steel exhaust system from turbo to the rear bumper. Custom made downpipe, custom 4" straight cut tailpipe: £200ono
Mk3.5 wing mirrors: £30
MOCAL 13 row oil cooler: £40
Chrome bonnet stay: £10
Headlights: £10ea, £15pr
Clear indicators with silver bulbs: £7ea
Rear beam: £25
Escort Cosworth direct replacement fuel pump: £60
FRST fuel tank: £20
Front anti-roll bar with clamps, drop links and Powerflex bushes: £35
Carpet: £10
Clear repeaters: £10pr



Gaz "Gold" series coilovers: SOLD
Wilwood Billet Dynalite 4 pot calipers (front), 285mm discs, pads and braided hoses: SOLD
FRST opening rear quarter windows: SOLD
Radtec custom made oversize radiator and fans: SOLD
Plazmadials: SOLD
Oil temp, oil pressure and boost gauges (all black Auto Meter as per photo's in my thread): SOLD
R and B Motorsport ACT gauge (illuminates blue): SOLD
FRST rear bumper with smoothed bumper strip: SOLD
Fiesta Frenzy/Area 6 camber adjustable, rose jointed lower arms: SOLD
FRST steering rack: SOLD
Steering column: SOLD
MOCAL thermostatic oil temperature control sandwich block: SOLD
CTS Stage 1 gearbox: SOLD
AP 4 paddle clutch and cover: SOLD
Radtec custom made front mount intercooler: SOLD
A pillar pod: SOLD
Vibratechnics "Competition" spec gearbox mounts: SOLD
FRST bonnet: SOLD






Other parts include , Sony Xplod 160W 2 way front speakers, Phillips 6x9" 3 way speakers, Sony Xplod 4x45W head unit, gear selector mechanism (recently rebuilt), S-shaped crossmember (modified a little), brake bias valves x 2.

Pretty much everything will need collecting from me in Somerset, as my job makes it a bit tricky to get out and post things!

Please click my sig to view my big thread about the car if you wish to see pics of any parts etc.

[heeman10]

For those who don't know the car in question, this is it:

[M4tty]

sad times , in the same boat as you now

[FRSJON]

sad times but pm'd...

[andymcd]

my name down the Gaz coilovers pls mate
when u thinking of breaking it?

[heeman10]

No worries andy

I'm hopefully looking at a unit in the next couple of days. If I have enough people requesting parts, I imagine I would begin stripping it next weekend, possibly sooner.

[Russ FRST]

Pm sent

[SEG1]

put my name down for the Escort Mk5 master cylinder and servo

[mikeymikeyp]

why did you fit a mk 5 servo

[dangerousdave]

why did you fit a mk 5 servo

its bigger to suit the wilwoods and rs200 rear disc conversion..

[heeman10]

put my name down for the Escort Mk5 master cylinder and servo

Gotcha buddy

mikeymikeymikeymikeymikeymikeymikeyp - I bought it with the pushrod already modified. I then bought a brand new master cylinder, bolted it on after spraying the servo, and fitted it all to the car

I have replied to all PMs to date. Will list people's names next to parts tomorrow night.

[mikeymikeyp]

i thought that ,just got rs 2000 stuff up front but never really been able to get a good pedal and tryed all sorts

[andymcd]

the escort mk5 servo is a great mod to do to a fiesta in my eyes
done it to mine best thing iv done to it

[FULLBORE]

what condition are the gearbox mounts in? How much do you want for them and how much mileage/abuse have they seen?

is the ap clutch new,if not, what mileage has it covered?

and finally, if you decide to split the engine i would be interested in the head......

[heeman10]

FULLBORE - The gearbox mounts should be in good nick. They have been hard used, but they stand up to it with no problems, hence the initial expense

The clutch is not new. AP fitted new friction pads to it perhaps 2,000 miles before I stopped using the car. I'd done about 7,000 - 8,000 miles on them before that point, and there was still plenty of life left in the pads that AP replaced. It was the perfect choice for my setup £50 for the gearbox mounts including nuts.

[BALBOA RS]

Pm'd dude

[Turboboy67]

Jimbo, I'm interested in the radiator mate please,

Any reason why it would not fit my track car ?

And have you got slimeline fan(s) for sale as well ?

I can come collect one evening

[Rhinopower]

armtech limiter with speed shift please!

[heeman10]

Shaun - No worries dude. I see no reason for it not fitting...you will have seen pics of it by now I'm sure I have two fans (slimeline?!! ) fitted to the rad...one on the front, one on the back. They are nice thin Spals. Say £150 for the lot

Ryan - The limiter module is yours, £50

[~S1~]

Wilwoods and lower arms please!

[~S1~]

Plus price on rebuilt gear selector. Was this the one with the bearings replaced?

[heeman10]

Bloody Wilwoods have been spoken for about ten times over dude I didn't even think to ask you if you wanted anything, it was a bit of a spur of the moment thing today after getting so fed up of being messed about.

Shaun - I've just gone through PMs and FRSJON said he wanted the rad. Any chance you two could sort this out between you both?? The trouble with being PMd and having thread replies all at once!

[Turboboy67]

Jon asked first mate so give him first dibs

If for any reason he pulls out let me know please

"Slimeline" Been a busy day mate

[heeman10]

No worries matey. He hasn't called dibs on the fans yet...you can have those just to get his back up if you like I've heard he also REEEALLY wanted the engine

[Russ FRST]

[quote="heeman10"]*Please indicate your interest in parts by replying to this thread, not via PMs. I would only like PMs from people interested in buying the engine package. I am trying to be fair to everyone, but it is hard to do so unless all interest in shown publicy in this thread. Thank you *

Gaz "Gold" series coilovers: £250
FRST opening rear quarter windows: £50

As already chatted about via Pm's But i thought i'd publicy show my intrest in above parts as requested

[~S1~]

knob!

lower arms and gearchange then!

[heeman10]

Russ - andymcd has first dibs on the coilovers and is making arrangements for their collection, but your interest has been noted

Paul - Yeah I'm really sorry about that I'll have to check the bloody PMs etc, I'm sure about fourteen people want the lower arms. The gear change you may have

edit: didn't see your other reply. Yes, this is the selector built entirely from new parts from Ford at the cost of around £135 IIRC! Thinking back...I'm pretty sure I had to re-use the actual metal selector rod itself since the FRST item was a different length. The springs and plungers were all new, the gear lever and its ball joint were new, the rubberised housing that bolts to the chassis was new, the plastic cup underneath (which holds the grease) was new, and the bush on the end of the stabiliser rod was new. You could just plonk your FRST selector rod (with the UJ on the end) into the assembly and bolt it all up. Say £40?

[ant pittaway]

plasma dials and second dibs on the rev limiter if u dont sell it

[heeman10]

Plazma dials are spoken for I'm afraid matey. You may have second dibs on both though

[Turboboy67]

Jon and I have exchanged text messages and he has been very sporting and allowed me to have the radiator

So will have rad and fans when your ready mate.

[frostie]

lower arms and brakes already chatted via pm's before any one posted on the thread and before james had posted up the edit about posting on the thread thank you

[RS rob]

a-pillar gauge mount for me please
let me know a price

[heeman10]

Shaun - Excellent, I'm glad you came to a gentlemen's agreement there. I believe you'll be helping our Irish friend out with the coilovers too. Nice one

RS rob - The A pillar pod is £30 matey, as new condition


My apologies to you all for not getting round to organising this thread as I'd hoped to tonight. I'll do my best to get it all in order tomorrow night with a bit of spare time. Thanks for your patience.

[Minstral]

how much for the clifford alarm including postage?

[krestudon]

I'm very interested in the coilovers if finally andymcd and Russ fail in getting them.

Thank you.