Everything must go,,due to relocatoion,, now with pics..
21 posts • Page 1 of 1
Everything must go,,due to relocatoion,, now with pics..
Awright folks, as I said above I must sell everything as we have had enough of this place and are movin to a hotter climate, so this is a list of stuff I have and will get pics up in the next few days Prices do not include postage.
FRST boost hoses with polished stainless steel pipe - £50
FRST engine - £400
baily dump valve with fitting kit - £60
FRST radiator - £50 SOLD to blackierst
FRST intercooler - £30
piperX air filter - £30
Mk3 smothed out tail gate - £150
Mk4 tailgate - £50
Mk4/5 Z-tech S rear bumper smothed out - £150
ERST 90spec RECARO's to fit Mk3 fiesta XR2i + rear bench + door cards - £250
G-max -60mm drop (gas filled) - £200
spax-60mm drop (oil filled) - £150
puma fan effect wheels - £200
polished stainless steel back box with 3" pipe - £70
smoked rear lights (painted kind) - £20
RED dot break discs X3 sets - £40 each
XR2i/RST break callipers - £10
splX 12" sub (not been used) - £25
set of side glass for XR2i - £40
Driver + pasenger door glass with security film fitted - £60
CLIFFORD cocept 100 with virtual key + fitting instructions - £150
CLIFFORD cocept 500 - £300
I also have my MINI project I have to sell had her for over 4 years now but she has to go I have stripped her to a bare shell and had everything that was rotten with rust replaced just needs a paint job and put together now with loads of TLC. I will consider any decent offer on it.
If any1 is interested in anything just leave me a pm and will get back to you as soon as I can.
FRST boost hoses with polished stainless steel pipe - £50
FRST engine - £400
baily dump valve with fitting kit - £60
FRST radiator - £50 SOLD to blackierst
FRST intercooler - £30
piperX air filter - £30
Mk3 smothed out tail gate - £150
Mk4 tailgate - £50
Mk4/5 Z-tech S rear bumper smothed out - £150
ERST 90spec RECARO's to fit Mk3 fiesta XR2i + rear bench + door cards - £250
G-max -60mm drop (gas filled) - £200
spax-60mm drop (oil filled) - £150
puma fan effect wheels - £200
polished stainless steel back box with 3" pipe - £70
smoked rear lights (painted kind) - £20
RED dot break discs X3 sets - £40 each
XR2i/RST break callipers - £10
splX 12" sub (not been used) - £25
set of side glass for XR2i - £40
Driver + pasenger door glass with security film fitted - £60
CLIFFORD cocept 100 with virtual key + fitting instructions - £150
CLIFFORD cocept 500 - £300
I also have my MINI project I have to sell had her for over 4 years now but she has to go I have stripped her to a bare shell and had everything that was rotten with rust replaced just needs a paint job and put together now with loads of TLC. I will consider any decent offer on it.
If any1 is interested in anything just leave me a pm and will get back to you as soon as I can.
Last edited by Steveboy on Wed Jun 28, 2006 7:09 pm, edited 9 times in total.
Concours White FRST resto on going......
- Steveboy
- Elite Post Master
- Posts: 1885
- Joined: Wed Nov 21, 2001 12:00 am
- Location: Dumbarton, Glasgow
hello mate id really like radiator can you pm me contact details or give me a call on 07896807990
cheers
dave
cheers
dave
- blackierst
- Senior Poster
- Posts: 331
- Joined: Fri Jun 16, 2006 7:27 pm
- Location: Milton Keynes
- JPXR2I:16v
- Elite Post Master
- Posts: 1997
- Joined: Mon Mar 01, 2004 8:04 pm
- Location: nottingham/beeston
Vaughny Yeah I got uor pm, I'll price up postage tomorrow, can you pm me with your details and I'll get right price.
JPXR2I:16v make me a reasonable offer and I'll concider it.
JPXR2I:16v make me a reasonable offer and I'll concider it.
Concours White FRST resto on going......
- Steveboy
- Elite Post Master
- Posts: 1885
- Joined: Wed Nov 21, 2001 12:00 am
- Location: Dumbarton, Glasgow
Whats the engine spec/condition/mileage etc?
What gearbox if your selling it?
What gearbox if your selling it?
What come's next? who care's, why worry about things over which you have no control. Freedom is a voyage of discovery with all the enjoyment of seeing things and experiencing events for the first time. Just sit back and enjoy the ride.
- TomRS1800
- Elite Post Master
- Posts: 9043
- Joined: Wed Dec 04, 2002 1:37 pm
- Location: I have no idea but its in the UK
TomRS1800 The engine is FRST 1.6 8v with kent cam and verier pullys, WRC head gasket, new piston rings and been fully rebuilt, the engine has not yet been run in so you will need to take it easy for about 500 - 1000 miles, comes wit standard gearbox. I'll get a pic of it as it stands just now.
Last edited by Steveboy on Wed Jun 28, 2006 6:54 pm, edited 1 time in total.
Concours White FRST resto on going......
- Steveboy
- Elite Post Master
- Posts: 1885
- Joined: Wed Nov 21, 2001 12:00 am
- Location: Dumbarton, Glasgow
Steveboy :TomRS1800 The emgine is FRST 1.6 8v with kent cam and verier pullys, WRC head gasket, new piston rings and been fully rebuilt, the engine has not yet been run in so you will need to take it easy for about 500 - 1000 miles, comes wit standard gearbox. I'll get a pic of it as it stands just now.
Nice one How much for that and the loom oh and without the gearbox
What come's next? who care's, why worry about things over which you have no control. Freedom is a voyage of discovery with all the enjoyment of seeing things and experiencing events for the first time. Just sit back and enjoy the ride.
- TomRS1800
- Elite Post Master
- Posts: 9043
- Joined: Wed Dec 04, 2002 1:37 pm
- Location: I have no idea but its in the UK
nick050 yeah I have pad carriers with as new pads in them. I guess you are wanting them with a set of discs? I would advise that you get the discs skimed by a machine shop though. Hows £60 posted for the discs and pad carriers (callipers)
TomRS1800 The engine is out of car now and dosent have inlet or exhaust manifolds, turbo or ECU with loom, you would have to source these parts. I do have new engine mounts to go with it.
TomRS1800 The engine is out of car now and dosent have inlet or exhaust manifolds, turbo or ECU with loom, you would have to source these parts. I do have new engine mounts to go with it.
Concours White FRST resto on going......
- Steveboy
- Elite Post Master
- Posts: 1885
- Joined: Wed Nov 21, 2001 12:00 am
- Location: Dumbarton, Glasgow
btt
If any one is interested in stuff just give me a call on 07845372404 as I will be of the net untill the 20th due to moving house and setting up new phone line adnd internet provider.
If any one is interested in stuff just give me a call on 07845372404 as I will be of the net untill the 20th due to moving house and setting up new phone line adnd internet provider.
Concours White FRST resto on going......
- Steveboy
- Elite Post Master
- Posts: 1885
- Joined: Wed Nov 21, 2001 12:00 am
- Location: Dumbarton, Glasgow
21 posts • Page 1 of 1
Twitter
The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R
17:44, 4th December 2021 Twitter Web App
To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP
17:42, 4th December 2021 Twitter Web App
Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/
Facebook
New article! fiestaturbo.com is 20 years old this year and I'm writing a series delving into the history of it. …
Saturday, 4th December 2021 12:49
Some awesome Escorts from the Fair - FORD FAIR 2021: ESCORT EXHIBITION - …
Sunday, 31st October 2021 17:05
All the best Focuses from Ford Fair - FORD FAIR 2021: FOCUS PEEKING - Which was your …
Thursday, 7th October 2021 22:21
Become a fan:
http://www.facebook.com/fiestaturbo/
RSS Feeds
Subscribe to the RSS feed
What is RSS?
RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.
To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.