2.0 16v Cam Upgrades....

CVH and Zetec tuning, suspension and braking mods.
Post a reply

2.0 16v Cam Upgrades....

Postby BillyCabrio on Mon Jan 02, 2006 8:57 pm

Any suggestions......??

Anyone actually done this to their 2.0 yet?
Click My Siggy To See My Cabbie Restoration Thread, All 29 Pages of it, make that 30!!
Image
BillyCabrio
Senior Poster
Senior Poster
 
Posts: 233
Joined: Wed Oct 29, 2003 12:35 am
Location: Dartford, Kent. 5 Mins From the M25.
Top

Postby freak power on Tue Jan 03, 2006 6:17 pm

If your still runing a single throttle body and N/A keep it simple and go for a fast road cams like Kents FZ2001 or FZ2002, if you go for the FZ2003 or FZ2004 then you will need the head maching for bigger 32mm oversize liffters.
I've just fitted some cams that are more wilder than the FZ2004 :o :D
Now driving a 1999 Audi S3 with 2.1 20v OD HTAGT3582r Turbo

Bring on the 650+Bhp 4x4 monster
freak power
Elite Post Master
Elite Post Master
 
Posts: 1748
Joined: Tue Jan 08, 2002 12:00 am
Location: Leeds
Top

Postby escortbreakers.co.uk on Thu Jan 05, 2006 12:56 pm

i got kent fast roads, they are good
Image
escortbreakers.co.uk
Senior Poster
Senior Poster
 
Posts: 285
Joined: Tue Jul 20, 2004 12:06 pm
Top

Postby grahamb on Sun Jan 15, 2006 8:44 am

Piper 270BH fit without mods, and give +16BHP

Any wilder and you're looking at mechanical followers, not hydraulic, and the costs start going through the roof.
Imagewww.zetecinside.com
  • 1/4 mile in 14.4s at 96mph [Oct 05]
  • Top speed 124.6mph [June 05]
grahamb
Elite Post Master
Elite Post Master
 
Posts: 1441
Joined: Tue Aug 21, 2001 1:00 am
Location: Leicestershire
Top

Postby freak power on Sun Jan 15, 2006 11:29 am

grahamb :Any wilder and you're looking at mechanical followers, not hydraulic, and the costs start going through the roof.


Tell me about it as it cost £220 just to get the lifter bores bored out to 32mm
Now driving a 1999 Audi S3 with 2.1 20v OD HTAGT3582r Turbo

Bring on the 650+Bhp 4x4 monster
freak power
Elite Post Master
Elite Post Master
 
Posts: 1748
Joined: Tue Jan 08, 2002 12:00 am
Location: Leeds
Top

Postby Al on Mon Jan 16, 2006 2:37 pm

Do you have to replace anything else when you fit aftermarket cams?
Al
Elite Post Master
Elite Post Master
 
Posts: 2002
Joined: Sun Apr 14, 2002 1:00 am
Location: Ashby, Leics
Top

Postby freak power on Mon Jan 16, 2006 7:15 pm

tappets and springs but you will get them if you buy a cam kit
Now driving a 1999 Audi S3 with 2.1 20v OD HTAGT3582r Turbo

Bring on the 650+Bhp 4x4 monster
freak power
Elite Post Master
Elite Post Master
 
Posts: 1748
Joined: Tue Jan 08, 2002 12:00 am
Location: Leeds
Top

Postby jdfiesta on Tue Jan 17, 2006 1:44 pm

Do you HAVE to replace the tappets and springs?
seen places selling aftermarket kits for zetec engine, cams only £175.
decent buy?
JJ
My ebay stuff http://shop.ebay.co.uk/merchant/2.0zetec
Image

Is that the best you can do?
www.volvot5.co.uk - www.germanshepherdsuk.co.uk
2000 V70 T5 SE - 2.3, 5 cylinder, 20V, VVT, Turbo, 250bhp, cream leather, climate control, the works!
jdfiesta
Elite Post Master
Elite Post Master
 
Posts: 3731
Joined: Thu May 15, 2003 2:34 pm
Location: Doncaster
Your car: V70 T5
Top

Postby Dazza on Tue Jan 17, 2006 1:48 pm

Iv seen this too jdfiesta, I was going to get some ysee - There just a re-grind using your old cams, to Kent/Pipers spec but I wondered about the springs etc
Dazza
Elite Post Master
Elite Post Master
 
Posts: 3028
Joined: Fri Dec 31, 2004 9:12 pm
Location: Merseyside
Top

Postby Sunil_FiestaRS_16V on Tue Jan 17, 2006 1:57 pm

Im running raceline cams, also have there matching head aswell so i know it all complements eachother
Sunil_FiestaRS_16V
Elite Post Master
Elite Post Master
 
Posts: 3958
Joined: Thu Mar 28, 2002 12:00 am
Location: Slough. 2.0 with Raceline head, Raceline cams, T.E Exhaust manifold, and more...
Top

Postby phil_pearce on Tue Jan 17, 2006 5:05 pm

How do you rate the raceline cams and head? Been thinking about doing this myself.
2.1 Zetec turbo Fiesta RS - 261bhp 310lbft
phil_pearce
Senior Poster
Senior Poster
 
Posts: 293
Joined: Wed Jul 27, 2005 6:59 pm
Location: Southampton
Top

Postby freak power on Tue Jan 17, 2006 6:10 pm

Raceline and Dunnell are good

Rickwood is better with his CNC machined heads

Ian Howell and Andy Weston are also some of the best when it comes to Zetec heads
Now driving a 1999 Audi S3 with 2.1 20v OD HTAGT3582r Turbo

Bring on the 650+Bhp 4x4 monster
freak power
Elite Post Master
Elite Post Master
 
Posts: 1748
Joined: Tue Jan 08, 2002 12:00 am
Location: Leeds
Top

Postby RS rob on Wed Jan 18, 2006 2:24 am

hmm good info
who's this rickwood guy?
whats his company called?
RS rob
Elite Post Master
Elite Post Master
 
Posts: 4176
Joined: Tue Feb 18, 2003 1:16 am
Location: south wales
Top

Postby freak power on Wed Jan 18, 2006 7:37 am

bridgend_boy :hmm good info
who's this rickwood guy?
whats his company called?


CNC machine heads
Now driving a 1999 Audi S3 with 2.1 20v OD HTAGT3582r Turbo

Bring on the 650+Bhp 4x4 monster
freak power
Elite Post Master
Elite Post Master
 
Posts: 1748
Joined: Tue Jan 08, 2002 12:00 am
Location: Leeds
Top

Re: 2.0 16v Cam Upgrades....

Postby RS1800pec on Fri Jan 20, 2006 5:11 pm

BillyCabrio :Any suggestions......??

Anyone actually done this to their 2.0 yet?


Has anyone done this :lol: hahaha

Have you scratched your balls today????
RS1800pec
Elite Post Master
Elite Post Master
 
Posts: 1719
Joined: Thu Jul 08, 2004 10:51 am
Location: Wycombe Drives RS1800
Top
Post a reply
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group | Made irresistible to the Big G with goodies from phpBB SEO
cron

Twitter

The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R

17:44, 4th December 2021 Twitter Web App

To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP

17:42, 4th December 2021 Twitter Web App

Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/

RSS Feeds

Subscribe to the RSS feed

What is RSS?

RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.

To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.