2.1 Litre Pinto engine in my fezzie?!
11 posts • Page 1 of 1
What do you reckon? I've heard that it will make my car rear wheel drive or something!!!
Or do I just turbo the bugger?! [ERRR] doing the cams etc only give minimal bhp and less drivability.
Ideas people ideas!!!
Or do I just turbo the bugger?! [ERRR] doing the cams etc only give minimal bhp and less drivability.
Ideas people ideas!!!
- Kat
- Senior Poster
- Posts: 486
- Joined: Mon May 14, 2001 1:00 am
- Location: Reading. Berkshire
It's already a Zetec!
Pinto? 20 year step back in time?
- Nitrous
- Throttle bodies
- Turbo conversion
Nitrous is the cheapest, but regarded as 'cheating' by some people. Throttle bodies are very nice but very expensive.
Turbo conversions are expensive if done right and a bit iffy if done on the cheap, spaced head gasket to reduce compression, 5th injector etc.
It depends how much you want to spend.
Pinto? 20 year step back in time?
- Nitrous
- Throttle bodies
- Turbo conversion
Nitrous is the cheapest, but regarded as 'cheating' by some people. Throttle bodies are very nice but very expensive.
Turbo conversions are expensive if done right and a bit iffy if done on the cheap, spaced head gasket to reduce compression, 5th injector etc.
It depends how much you want to spend.
- AdrianFRST
- Baby Battle Scratch
- Posts: 7381
- Joined: Sat Sep 25, 1999 12:00 am
- Location: A long walk, and it's that-a-way...
- Your car: ..? Pretty car..!
Car: 2010 Ford Focus RS
Hmmmm gonna wait till the Ford Fair and get some ideas's then I think... I have to get this baby quick as he looks the part but is still standard... might approach a few places and offer extreame advertsing in return of mental tuning.... what do you reckon?!
- Kat
- Senior Poster
- Posts: 486
- Joined: Mon May 14, 2001 1:00 am
- Location: Reading. Berkshire
If you put the pinto engine in, it doesnt have to be rear wheel drive! It mates up perfictly with the zetec or cvh gearbox! If you were wanting to go rear wheel drive, i'd go for the cossie. Or you could try squezing the st24 v6 in there!!!!! It's not been done yet!! Any takers?????
- TURBOJUNKIE
- Senior Poster
- Posts: 204
- Joined: Sat May 05, 2001 1:00 am
- Location: FALKIRK, SCOTLAND
Oh f/ck it, I'm gonna start doing some V6 homework.
I know there's a Mk2 do-doter running round Saaaaahfend with the V6 176 brake lump in it, fappin loons.
I know there's a Mk2 do-doter running round Saaaaahfend with the V6 176 brake lump in it, fappin loons.
<< I need to put something here, yer? >>
- Project
- fiftyoneCL
- Posts: 16261
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Getting outta the UK come hell or high water ;o)
You can get the Duratec for a little shy of £600.
Any takers on how much a Turbo 2L lump with loom, etc, would cost?
Har-de-har har-de-har-har
Any takers on how much a Turbo 2L lump with loom, etc, would cost?
Har-de-har har-de-har-har
<< I need to put something here, yer? >>
- Project
- fiftyoneCL
- Posts: 16261
- Joined: Thu Jan 01, 1970 1:00 am
- Location: Getting outta the UK come hell or high water ;o)
11 posts • Page 1 of 1
Twitter
The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R
17:44, 4th December 2021 Twitter Web App
To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP
17:42, 4th December 2021 Twitter Web App
Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/
Facebook
New article! fiestaturbo.com is 20 years old this year and I'm writing a series delving into the history of it. …
Saturday, 4th December 2021 12:49
Some awesome Escorts from the Fair - FORD FAIR 2021: ESCORT EXHIBITION - …
Sunday, 31st October 2021 17:05
All the best Focuses from Ford Fair - FORD FAIR 2021: FOCUS PEEKING - Which was your …
Thursday, 7th October 2021 22:21
Become a fan:
http://www.facebook.com/fiestaturbo/
RSS Feeds
Subscribe to the RSS feed
What is RSS?
RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.
To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.