fiestaturbo.com

by **vx220** on Fri Jun 22, 2007 11:34 pm

any good?

nice and easy? (could i do it?) :lol:

by **Mikee_RS** on Sat Jun 23, 2007 1:37 pm

pornstar (neil @ fastford) has.

by **vx220** on Sun Jun 24, 2007 8:47 pm

Mikee_RS :pornstar (neil @ fastford) has.

pm'd him direct, but no reply so far (nudge nudge)

by **Oranoco** on Sun Jun 24, 2007 10:26 pm

Neil is a busy guy I'm sure he will get back to you when/if he gets a chance.

I've got the bits to do mine bar the slightly longer shock bolts

by **jayrs** on Mon Jun 25, 2007 12:01 am

seen it in the mag, does it make a great deal of difference.
mind you on the track i guess it make a hell of a lot

by **pornstar!** on Mon Jun 25, 2007 1:12 pm

Replied now :wink:

I spend too much time online during the week to be logging on at weekend. I have to work on my car, see my mates, rod my mrs's etc over the weekend so time online is thankfully limited.

When i get a minute i'll get some piccys up of the "tripod".

was poppin up a wheel like a 'gud 'un at brunters! Stiffens the rear a treat.

Funny stuff.

Have you already got the beam on your motor??

if you have it's pretty easy. If not its still not hard. Simple but effective.

by **Jonezy** on Tue Jun 26, 2007 2:46 pm

is it just a matter of bolting 2 of the same anti roll bars in place?

by **jayrs** on Tue Jun 26, 2007 2:52 pm

me? yeah i got a beam on mine mate :lol:

by **pornstar!** on Tue Jun 26, 2007 3:26 pm

Some FRST's dont have a roll bar at all though jay :wink:

Mine didnt! :wink:

Jonezy- Have a squint at a mag when you get a chance pal! It's so easy if you have an Anti-roll bar in place if not, dont despair! It's totally do-able

by **jayrs** on Tue Jun 26, 2007 3:38 pm

it should of mate, they all came with them.

unless yours had a new beam at some point due to bottom shock bolts snapping, which ive seen before

by **pornstar!** on Tue Jun 26, 2007 3:41 pm

Gawd knows, someone on here who hasnt seen a girls fanny will proabably correct me but i thought the first FRST's came without one?

Meh! It's done and it works!

by **jayrs** on Tue Jun 26, 2007 4:20 pm

mate, its ford, they ment to come with them but what can i say :lol:

by **pornstar!** on Tue Jun 26, 2007 4:22 pm

by **DravenFeista** on Tue Jun 26, 2007 5:54 pm

can someone chuck up an image of this?

by **Jonezy** on Wed Jun 27, 2007 12:39 pm

jayrs :it should of mate, they all came with them.

unless yours had a new beam at some point due to bottom shock bolts snapping, which ive seen before

which mag? ive got the one with your car at oddkid creations having the lambda and coilovers with twin anti roll bar done?

by **j7aoc** on Wed Jun 27, 2007 1:03 pm

The stabilizer bar is listed for the fiesta rs turbo in the ford technicians book

by **jayrs** on Wed Jun 27, 2007 8:50 pm

Jonezy :
jayrs :it should of mate, they all came with them.

unless yours had a new beam at some point due to bottom shock bolts snapping, which ive seen before

which mag? ive got the one with your car at oddkid creations having the lambda and coilovers with twin anti roll bar done?

thats the mag im on about

by **Jonezy** on Thu Jun 28, 2007 1:09 pm

that articles not particularly helpful then with the ins and outs of actually fitting the thing though.

unless you go to oddkid creations itself.

by **heeman10** on Thu Jun 28, 2007 3:11 pm

pornstar! :I have to rod my mrs's etc over the weekend

pornstar! :When i get a minute i'll get some piccys up of the "tripod".

No need for pics of that, and I refuse to call you "the tripod" :lol:

by **pornstar!** on Fri Jun 29, 2007 11:13 am

Jonezy :that articles not particularly helpful then with the ins and outs of actually fitting the thing though.

unless you go to oddkid creations itself.

It's four bolts. Not difficult. I just had another look, i dont think anyone could have made it any clearer with being patronising.

take your roll bar off. Get another. Flip one upside down. Connect back up with fresh polybushes.

James...shaaaat it!

by **j7aoc** on Fri Jun 29, 2007 11:15 am

heeman10 :
pornstar! :I have to rod my mrs's etc over the weekend

pornstar! :When i get a minute i'll get some piccys up of the "tripod".

No need for pics of that, and I refuse to call you "the tripod"

by **SEG1** on Fri Jun 29, 2007 12:32 pm

does it make a difference??

by **pornstar!** on Fri Jun 29, 2007 12:46 pm

Yep, but for a normal road car with average suspension dont expect to set the world on fire.

i run Gaz Gold coilover, full set of Powerflex bushes (everything), new front and rear roll bars, lower arms and a proper set-up.....although i have messed with my settings since.

It stiffens the rear end up very well on my motor.

by **Jonezy** on Sat Jun 30, 2007 1:47 pm

cool, il see how fitting one rear arb goes then il have a bash at fitting two

by **Jonezy** on Sat Jun 30, 2007 1:47 pm

cool, il see how fitting one rear arb goes then il have a bash at fitting two

by **fiestasiphil** on Wed Jul 25, 2007 11:18 pm

can i do this using a rs1800/si rear beam? as i have 2 rear anti roll bars to hand...or does it have to be a frst beam?

cheers phil

by **jayrs** on Thu Jul 26, 2007 12:11 am

FRST beam is same as any other mk3 beam that has a rear ARB

by **fiestasiphil** on Thu Jul 26, 2007 12:12 am

jayrs :FRST beam is same as any other mk3 beam that has a rear ARB

awesome thanks mate

so as i have 2 axles with 2 anti roll bars its a easy job

by **jayrs** on Thu Jul 26, 2007 12:37 am

yeah should be mate

by **lowsi** on Tue Jul 31, 2007 4:14 am

ive been wanting to do this too

looks snazzy :lol:

by **FezV6** on Tue Jul 31, 2007 10:55 am

Does anyone have a pic of this then?

by **JayC** on Sun Aug 05, 2007 2:12 pm

what about a twin front :lol:

studs are long enought on the droplinks but i dunno what effect it would have

by **vx220** on Wed Aug 08, 2007 10:26 pm

JayC :what about a twin front studs are long enought on the droplinks but i dunno what effect it would have

basically, an anti roll bar gives more grip to the other end of the car to which it is fitted.

so if you uprate the front, you will gain some understeer!

by **JayC** on Thu Aug 09, 2007 1:18 am

dunno if thats good or not tbh?

by **SEG1** on Sun Sep 16, 2007 9:49 am

do you need longer bolts to do this?

fiestaturbo.com

anyone done the twin anti rollbar trick on the rear?

anyone done the twin anti rollbar trick on the rear?

Re: anyone done the twin anti rollbar trick on the rear?

fiestaturbo.com

anyone done the twin anti rollbar trick on the rear?

anyone done the twin anti rollbar trick on the rear?

Re: anyone done the twin anti rollbar trick on the rear?

Twitter

Facebook

RSS Feeds

What is RSS?