fiestaturbo.com

[jdfiesta]

hopefuly somewhere between 140 - 150
anything over 135 and i'll be happy though
JJ

[NeoMagic]

110 but it does feal like 110 even for a 13 year old car.

[NeilH]

All your numbers mean nothing without a power to weight ratio

Only a kitcar owner would come out with something that gay

I haven't weighed mine yet, but the FRST was about 935kg out of the factory I think

Yet?!?

LOL

One to you

Neil

[RS_Raz]

90 standard but wont be anywhere near that now the bottom end is fcuked

130 next week though

[reisskahn]

erm

t3
chip
begies
pace intercooler (not fitted yet, will try look for a bigger one)
maybe recently rebuilt with low comp end

hoping to get around 200bhp when i get it setup or am i dreaming????

[festa_boy19]

bout two weeks ago my frst was runnin 166bhp, my new car runs 90bhp!lol! the 2.0ltr will be sourced soon enough though!

[andymac]

120-200 depending which one we're talking about

[rsboy82]

hi got a rolling road report in my recipt folder for 171bhp might be flywheel or at the wheels it doesnt state which! but that was 30k miles ago and now i think its about 110bhp its dead as a dodo
But this weekend its coming out and been replaced with a nice shiny 1.9 yankie block stage 2 head t3 turbo grs intercooler etc etc so hoping to get about 230bhp
will let you know when its done

[TIL13R]

@ a guess its about standard 108bhp

[sunnyFRST]

never enough....but plenty more to come soon!!!

[TIL13R]

never enough....but plenty more to come soon!!!

Fancy leading some to me

[CarismaDave]

I win But only til Sunny finishes his...or if PJ enters lol!

355bhp
361 lbs Torque

355/935 X 1000 = 380 BHP per tonne!

Dave

[sexy-aRSe]

I dunno Maybe 240-250

After picking it up from grove tuesday, my injectors are maxed now! Not sure what they max out at lol

Will find out on the 4th

[rsboy82]

I win But only til Sunny finishes his...or if PJ enters lol!

355bhp
361 lbs Torque

355/935 X 1000 = 380 BHP per tonne!

Dave

I think TurboBoss might have beaten ya dude

[GavStyli]

211 donkeys

[andymac]

211 donkeys, 4 goats and a chicken. Not found the chicken yet though...

[CarismaDave]

I think TurboBoss might have beaten ya dude

His car's not finished so don't count

Think you'll find his power isn't proven on an engine dyno (as far as I know) anyway

[rsboy82]

I think TurboBoss might have beaten ya dude

His car's not finished so don't count

Think you'll find his power isn't proven on an engine dyno (as far as I know) anyway

its back on the road but yeah i dont think he has entirely finished yet but he said hes going to the passionford rolling road shoot out so we will have to leave it open till then

[MAD_Adamski]

cossie :- 298 bhp 320lbft on 1.2bar

fez was 185bhp 210blft now??? hoping for 200bhp 220lbft??

[acrebo]

Apparently 192 according to a RR readout I've got, but I don't believe the induction kit and exhaust can free up that much in the 172, so probably closer to 175-180.

[RosscoPeeco]

Mines 193, but since then ive put a PE cam in and ive got management to fit, watch this space

[siace]

121 from my wee fezza si 1.6 16v, and i think thats as far as i can go realisticly, so 2.0 next

[Big Walker]

Siace WTF have you done to it?

Heeman is there not a kit car owner in your at your home ?

Is heghey too?

[siace]

i havnt a clue, i had it on the rollers and it was 90, and the bloke gave me the usual "2.0 is the best way", so i went away, and put on a few bolt on bits, a focus manifold and 2.0 tb, cat back and decat, 4 2 1, cold air induction kit, superchip, fse valve and ecotek valve. The only thing i did differently is that i used beige injectors and had the fse and 2.0 maf set to run together as best as possible without over fueling, took it back and they came out with 121, dunno what the torque was, but i wanna no so il ask my mate 2 check again soon.

[Big Walker]

Nice but IMO thats a lot to spend on the Si engine

But well done mate

[siace]

dude it cost me 200 lol, but now that the engine is warn, leaking oil and has a bent valve, i need 2 get the 2.0 in asap, need 2 find sum1 2 do it for me, i cud do it but im too busy with work at the mo.

[Big Walker]

£200 wanna sell me some of the bits then once you get the 2ltr then ?

[~Tony~]

142 bhp

[siace]

lol, yea il stick itt all for grabs on here, i think having the the 2.0 maf made the car run slightly to rich, so the baige injectors and the fse valve really work well to help with the fueling. its a little slow off the line but when you get to about 2500 revs and floor it, its like a ******* train! Not as good as a standard 2.0, but its close lol.

[javablu]

Interested in this siace.

Wanna post up where you can get these bits and bobs from? Obviously not 2l maf and T/b

[siace]

lol everyone that was with me when i got it rollerd was asking how i did it, evan the test dude, but i honestly dont know, it must be the right combination of bits. the 1600 zetec seems to like focus bits and peices. One other thing it could be is, im very good with car electrics, so i replaced all the engine earths with new ones and new earth points where possible, and with thicker wire. Iv been told that this can greatly help an engines performance as you get a fatter stronger spark, cuz the old rearths are small and tend to rust on cars very quickly. That could help. If it was that, its a peice of **** to do!

[JamieFRST]

205 horses, but they seem to have escaped via a large hole in one of the pistons

[wildheart]

RS1800 122 bhp on Mike Gurneys rollers

S1 Dont know yet!

3dr Cos- Was 312 bhp @ Nobles on old T3 and i.c and crappy ahmed map,
Should be in region of 340/350 bhp on same rollers with rs500 i.c,T34.55 turbo and NMS Remap