fiestaturbo.com

[TURBOHERM]

Ok, which one of you nice people have a nice diagram and instructions of which pipe to plumb in my new boost gauge?

The 'general / any car' instructions that come with it are a bit pants.

Any hint's or tips for installing before I go ahead with it?

[Fezzy Turbo]

Is this for a FRST ?

Where to stick your tube.....

On the EFi plenum chamber there should be a spare pipe with a black cover on the left handside as u face it. Pull off black cover and put on your tube from the boost gauge.............

BINGO!!

your boost gauge should work.

cheers

[Quantum]

http://fungus.demon.co.uk/img/boost.jpg


Red arrow marks the spot

Regards,
Stephen

PS Sorry if the image is slow to load

[Fezzy Turbo]

always one flash git with pics

[TURBOHERM]

Yeah FRST!

Cheers, wasn't so sure cus that is where my d/v is.

T'ed into it and all is working well!!

[Stoned]

mmm. I have one of these tubes in my Fez going unused

What boost gauge do people recommend. A small one is poss, I want to keep my clock

[TURBOHERM]

I was going to put my gauge in between the left window switch and the boot swith on the center console but my gauge is 52mm and wouldn't fit so I ended up making a plate and replacing my clock with the gauge.
The live wires were there already so it made sence and you can see it better.
I got a LED gauge from midland performane. It has seven different colours of choice which are really bright and you can either select one colour or have the colours scrolling every second, but that makes it really hard to read.
White dial, orange needle and silver coloured surround makes it look cool and for only £45 you can't really go wrong.
And as for accuracy, the boost read 7psi when I boosted - spot on!!!

[Quantum]

A picture speaks a 1000 words

[Fezzy Turbo]

If you have the cash and want a VERY accurate boost gauge............

get a .....

DEFI boost gauge

mine are on order and Sunny has them also.

But they aint cheap