fiestaturbo.com

[fiestasiphil]

hi everyone im breaking this fiesta rs 1800 which is completely totalled rot wise the floor pan is hanging out on the front and rear foot wells passenger sill and nearside quarter totally rotten has been sat for nearly 6 years

strut brace and pipercross sold and im keeping the magnex system and de cat

car spec recarcos slight tear on the seam on drivers side, 130bhp 1.8 16v engine with ho inlet manifold runs really well just changed oil and filter on it today , drilled and drilled discs, boost valve, powerflex bushes in front wishbones, ecu fitted with powerchip module, megnecor ht leads,

lowered 60mm on gmax springs, rs turbo spolier, full rs/xr bodykit, (i do have a set of complete undamaged lights for the front bumper) rs1800 alloys need work but complete, electric windows, drivers door mint no rot, passenger side slight bubble nothing major, has abs, twin ford horns

will sort some deals if you come and collect but can post most items except big items but may take a little while cause of work :thumbsup:


post up, pm me or call or text me on 07809235610

[RSGeorge]

What state is the bootlid in? any rust or rot?

[fiestasiphil]

couple of light scabs on the left of number plate, and little bits under the lights nothing to bad to be honest

[RS EDDIE]

What nick are the rubber front mats in mate, any wear on the heel sections???

[Nismo]

How much would you be looking for the spoiler?
Also I need a Rear Left Handed Wheel Arch. And a Rear bumper.
Whats your price on them, also I would need posted to Mainland UK N.Ire. So I wouldn't be able to collect.
Just so you know.

[fiestasiphil]

What nick are the rubber front mats in mate, any wear on the heel sections???

will check when im next down the gatage eddie as im not sure

[fiestasiphil]

How much would you be looking for the spoiler?
Also I need a Rear Left Handed Wheel Arch. And a Rear bumper.
Whats your price on them, also I would need posted to Mainland UK N.Ire. So I wouldn't be able to collect.
Just so you know.

will pm you

[RS EDDIE]

Ok mate let me know pal.

[~nomad~]

what condition is the front bumper in? Dont care about the lights.

[fiestasiphil]

what condition is the front bumper in? Dont care about the lights.

front bumper is in good nick altho very small crack on bit where the strips should go of the nearside front apart from that its mint

[~nomad~]

got a pic of the crack? how much you after?

[fiestasiphil]

will get one for you when im next there will be wednesday

[xr_bass]

how much for the ho inlet posted?

[MgsDetail]

What colour is the rear shelf and condition?

[fiestasiphil]

how much for the ho inlet posted?

70 quid mate

[fiestasiphil]

What colour is the rear shelf and condition?

its in really good condition but I cant remember the colour will check when im next down the garage could be goung back tomorrow

[Spanish_1.1]

Hi mate, are the ICV and the TPS in good working order? If so, how much do you want for them?

Regards

[philip_d]

How much for the Fuel Rail and Injectors posted?

[fiestasiphil]

Hi mate, are the ICV and the TPS in good working order? If so, how much do you want for them?

Regards

hi mate sorry only selling them with thottle bodie and inlet together

[fiestasiphil]

How much for the Fuel Rail and Injectors posted?

will pm you mate

[fiestasiphil]

steering wheel,front bumper, bonnet, all front lights, whole interior loom and whole engine loom sold

[SLEEMAN]

steering wheel,front bumper, bonnet, all front lights, whole interior loom and whole engine loom sold

hey matey you still got that engine etc??

[fezza89]

what front doorcards has this got? is it same as turbo but dark vinyl not grey?

[fiestasiphil]

sorry mate whole interior has sold

[fezza89]

okey dokey

[fiestasiphil]

boot, spolier, doors sold ....this car is getting squashed in about 2 weeks so will have everything available including axle soon

[Wittmann]

How much for that strut brace? and will you post it?

Did read too fast was gone already..