fiestaturbo.com

[Tweek]

My front towing eye got cut off when i had to drop the gearbox, bumper's bonded on in places so couldn't be arsed to mess about lol, anyway, when I broke down I told the AA fella and he arranged for a recovery truck that picked the car up by the wheels instead

[happypaul]

I got towed with the VR6 splitter in the way, it just bent abit..

[luca]

Might have to purchase 3 bits 2 x left hand side and one right hand side.

Then i can cut the left side to allow for a tow fitting to be fitted, and the removable panel I craft from the extra piece will hide the it.

Il keep yu posted next week, shall order tomorrow

[jayrs]

Might have to purchase 3 bits 2 x left hand side and one right hand side.

Then i can cut the left side to allow for a tow fitting to be fitted, and the removable panel I craft from the extra piece will hide the it.

Il keep yu posted next week, shall order tomorrow

sounds like a good plan to me mate

[luca]

Well i ordered today and they had one half of a splitter in stock, so im now teased with half but not a full splitter until monday.
For the 2x halfs it was £34.95 brand new

[Max M4X WW]

Where from? Out of interest!

[luca]

Where from? Out of interest!

Purchased from a company near me called GERMAN,SWEDISH & FRENCH , they are a national company.

So may have a unit near you, if not online..
http://www.gsfcarparts.com/branches.html

[Max M4X WW]

Oh fair enough, Thought it would be - just checking!

[jayrs]

nice mate not a bad price at all

[m3matt]

hi mate, i got my splitter from gfs too, easy to fit, and looks made for it ...once you cut it lol pic -





took second pic after i hit a speed bump at a funky angle lol re-fit time.

[luca]

Well i popped in the garage today to remove my carbon splitter that i had temporarily made.

I offered the new half i had up and its slightly deeper than the one i had on there so all is well.

Should hope to update more tomorrow/tuesday with the new one fitted.

Stage one - OLD SPLITTER REMOVED.

[jayrs]

you didnt get a pic of the half trial fitted

[luca]

I held it in place and was happy

I need to trim the plastic tabs off so it fits on the edge closest to the wheel, thought best wait until the bumper is off and the other half is here.

[jayrs]

im just messing with ya mate, going but the standard of work so far i know its not going to be a quick half hour job for you to fit, i reckon a hour or 2 as your want it spot b0llock, with +/- 0.5mm tolerance
which i dont blaime ya

[luca]

im just messing with ya mate, going but the standard of work so far i know its not going to be a quick half hour job for you to fit, i reckon a hour or 2 as your want it spot b0llock, with +/- 0.5mm tolerance
which i dont blaime ya

You think im some kind of cowboy!!!

+/- 0.2mm tolerance is my agenda pal!

The cars held together with tiger seal anyways

You going to the meet next Sunday

[jayrs]

sorry it was a typo i hit the 5 not the 2 my bad

erm dunno mate, jon asked me last night, but i might be busy at the weekend helping someone on the mainland but wont know if thats a go or not till i see him at work monday/tuesday

[luca]

sorry it was a typo i hit the 5 not the 2 my bad

erm dunno mate, jon asked me last night, but i might be busy at the weekend helping someone on the mainland but wont know if thats a go or not till i see him at work monday/tuesday

Thats ok then as its the following Sunday im told

[jayrs]

sorry it was a typo i hit the 5 not the 2 my bad

erm dunno mate, jon asked me last night, but i might be busy at the weekend helping someone on the mainland but wont know if thats a go or not till i see him at work monday/tuesday

Thats ok then as its the following Sunday im told

i walked into that, na might be busy NEXT weekend

[M1K3Y_B]

The spillter is going to look so good on your car

[moggyfrst]

MCR (if you can find one)

my mcr spliter is a full bumper, never sin one befor

[Tweek]

Probably just been smoothed in, a lot of people do it cos it looks better, myself included

[luca]

Splitter is fitted now

[frostie]

pics please sir

[luca]

Needing to join in the middle properly yet and sort out the towing eye cover/cutout.

[FRSJON]

looks good luke..so you coming tomorrow??..

[slaney21]

just managed to bag myself one of these off ebay for a tenner used but its all been cut so ready to go on

not sure if im 100% with it but when i get it in 2 weeks il see then. if i dont like it il re sell it if anyone here would want it

[M1K3Y_B]

Looks awesome mate, looks alot more aggressive

[slaney21]

typical. said id have the splitter and pay next friday but the bloke decides to sell it anyway

[stealth-T]

aright.what do ya use to cut the middle part of the splitter?

[jonboisescort]

i used a hacksaw

[RS rob]

Probably just been smoothed in, a lot of people do it cos it looks better, myself included

and mine

[moggyfrst]

Probably just been smoothed in, a lot of people do it cos it looks better, myself included

and mine

no mines a full bumper as i found out when my uj went in tesco garage an could'nt get it on a transporter [ERRR] it was to low so had to fix it there, that was fun