fiesta rs turbo, updated, 29/03/16

Post pics of your Fiesta here.

Postby jayrs on Tue Mar 14, 2006 7:44 pm

cheers mate, :D
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Mon Apr 10, 2006 1:22 am

right its been a while, but i have been busy.

the engine crank is now (as i type) on its way to be regound, new shells are coming when it comes back too, £167 :o thats a bit more than i was first told but $hit happens.

pistons, mahle 0.5mm over size are being ordered tomorrow (10th april), cheapest i could find was £275, in one of my other posts i might of said about pistons being £200, but i cant remember, but these were king pistons, ive never heard of them and was told but someone that they dont make turbo pistons :-? anyhow, pay the rest get the best, or one of them so mahle it is.

block will boe bored once pistons are here, i had it messuered by the place thats gunna bore it and they told me to get the 0.5mm over size so alls good there.


so far on the rest of the car, ive stripped and painted the rear beam, i stripped and painted the rear anitroll bar this aftrenoon.
the fuel tank, fuel lines and brack line have been removed, as have the body kit, basicly the underside is bear ready fo cleaning up and repainting/undersealing

reast really is few other bits like, bottom arm brackets, steering rack etc etc have also been removed.

unfortunatly i got laid off from work at the end of march so i got time on my hand, hopfully i can get lots done untill i find another job, funds allowing of course.

few pics, nothing major just what i have of the rear beam after i srtipped it (with wire brush that fits grinder) and after its been painted,

Image
Image
Image
Image
Image
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby heeman10 on Mon Apr 10, 2006 1:39 am

Oh we have an update! Sorry to hear about you losing your job :( Remind me what you did again? Did you not fancy stiffening up the rear beam while it was off? Enjoy some lie-ins and fuller days of work on the car! Long days can grind, but slow-moving projects grind more!
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby jayrs on Mon Apr 10, 2006 2:26 am

heeman10 :Oh we have an update! Sorry to hear about you losing your job :( Remind me what you did again? Did you not fancy stiffening up the rear beam while it was off? Enjoy some lie-ins and fuller days of work on the car! Long days can grind, but slow-moving projects grind more!


i was made redundant from a job in dec 05, where i used to build wind turbin blade, then i worked for a place making bullet proof boards for banks and whatever else, due to "lack of work" i got laid of with the message there call me when work picks up, but we're see.

as for rear beam, i dont see the point in stfferning it up, i know people say its better handling etc but tbh i have never had a problem with the back end

lay ins are always good, but i will get up early in the week as i dont want to get used to it :lol: :lol:

got plenty on though, will be re-studing my wheel archs one day this week, but thats a indoor job so can be saved for when its raining
still i will use the time i have on my hand to progress this as far as i can funds dependant, want it done by summer time really
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby heeman10 on Mon Apr 10, 2006 2:36 am

Yeah the back end on mine hasn't presented any problems for me, would definitely weld something on it while it was off to see if it improved anything anywhere. Sod it, it's not my car! :lol: Sorry to hear about your crap run of jobs, I'll ask around, see if any friends need wind turbine blades making :)
Image
James .:. 193bhp/245lbft Zetec Turbo Mk3. Click sig for conversion thread + videos .:.
heeman10
Elite Post Master
Elite Post Master
User avatar
Posts: 28746
Joined: Fri Nov 08, 2002 5:32 pm
Location: Somerset
Your car: Audi TT TDI Quattro S line

Postby jayrs on Mon Apr 10, 2006 1:14 pm

heeman10 :Yeah the back end on mine hasn't presented any problems for me, would definitely weld something on it while it was off to see if it improved anything anywhere. Sod it, it's not my car! :lol: Sorry to hear about your crap run of jobs, I'll ask around, see if any friends need wind turbine blades making :)


i did think about it mate, as i remember a discussion about it ages ago, but after talking to my dad it was decided that if we did weld something on and it made it worse we would have to fook about cut it off, and as they say, if it aint bust dont fix it, so we followed that :lol:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Tue Apr 11, 2006 12:04 pm

i though i would show the bli ng i got for the rs today so i dug it out, and thats true! some of it i got at fordfair 2004!!! and its still new :lol:
cam cover, strut tops and heatsheld, FF 2004
battery cover FF 2005
sill plates (might sell) came off a blck rs i sold about 3 years ago
brake res cover got from noman last year i think
map sensor plate from my mate wesRS who had put it in the bin when he told me about it! :o , lucky it was a box of all old car bits and was still under his car but still! :lol:

i also got the stainless pipe from turbo to ntercooler to polish up yet, and my mates gunna make me some under vent plates, might have these made from titanium just because i can :lol:

Image
Image
Image

oh yeah i got some not so mint strut tops for sale in my for sale post, see the link in my sig for pictures.
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby niracka on Tue Apr 11, 2006 12:51 pm

looking good m8 keep up the good work. I wish i new how to do all this stuff. it would save me heaps for when i get my rs later in the year. I really wanna learn but i dont wanna start on my own car n mess it up lol. plus i have hardly any tools yet.

ollie
Image
niracka
Elite Post Master
Elite Post Master
 
Posts: 2653
Joined: Sat Sep 03, 2005 5:12 pm
Location: Elgin - Sctoland Drives: E46 M3
Your car: E46 M3

Postby jayrs on Tue Apr 11, 2006 1:01 pm

niracka :looking good m8 keep up the good work. I wish i new how to do all this stuff. it would save me heaps for when i get my rs later in the year. I really wanna learn but i dont wanna start on my own car n mess it up lol. plus i have hardly any tools yet.

ollie


cheers mate, any haelp and advise can be got off this site as ya prob already know, im self taught, and know more than most of the c0ck heads working in garages over here :lol: plus my dad is self taught and has been doing it for focking donkeys so his helpping me as well.

advice i can give ya, get a manual, take ya time, dont start anything you dont think you can finish/do safely unless ya can get help from some that can.

as for tools, if ya havent got loads of cash to splash, check out boot sales and charity shops and some new cheap stuff is ok to start with.
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Wed Apr 12, 2006 7:54 pm

been busy today, well when i could be bothered to drag my ass out to the shed :lol: :lol:

stripped inlet manifold and cleaned it up, still got throttle body to do and fuel rail.
started on the thermostate housing

degressed head again, gunna reseat the valves tomorrow

gave the rear anti roll bar another coat of paint

oh yeah, and these arrived mid morning :D

Image
Image
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Thu Apr 13, 2006 12:55 pm

just got a text, the crank has been dropped in to be regound :) just got to arrange to get it back from mainland now :lol: :lol: , easy getting it over there as cousin came down for hoilday so that saved me waiting about :)


just thought i would post some pic's of the escort im smoking around in untill the FRST is done.

oh yeah, if anyone knows of a clear indercator for the bumper for sale anyway let me know as some fuc ker nicked one just after i got the car for the wife a couple of years ago, and i dont want to buy a set of 2 :lol:
PM me if ya know of one :)

Image
Image
Image
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Wed Apr 19, 2006 11:07 am

was looking through some pic's on my pc and cam across the ones from when i done my bumper up.

i got the bumper in 1999 and its been through some changes sice i got it, i cut the top grill part off (they didnt make them like that then) it it had a few repairs since that, someone reversed into it in a car park and scracked the top :x then someone hit it and put a hole in the drivers side part about a inch from the light pocket, both times i fixed it my self, that was back in 02, so 4 years later it hadnt done bad, crack in the spliter part and loads of spider cracks from that crack and around the light pockets due to gel coat cracking, i grond out the gell goat along the crack and drilled a hole at each end of the crack to stop it going further, from there i went on to prep it ready for filling and filled, primed and sprayed.

well my dad sprayed the red.

these are just a few of the pictures, i know its got nothing to do with the rebuild now, but i see it as a early start to it :bonkers: :lol:

the white is the gell coat the green/grey/pinky bit is the fiber glass under it :lol: its the only way to get shot of a spider crack really, as you can see, i didnt hold back!

Image
Image
Image
Image
Image
Image
Image
Image


just thought i would post them up :D :lol:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby Whitty_696 on Wed Apr 19, 2006 9:41 pm

looks sweet m8

keep up work up m8
R.I.P ROB GONE BUT NEVER FORGOTTEN
Image
Whitty_696
Poster
Poster
 
Posts: 101
Joined: Thu Jul 22, 2004 4:14 pm
Location: down the road from cybermods

Postby jayrs on Wed Apr 19, 2006 9:49 pm

cheers mate, plan to get out to it over next day or so to get the underside painted up so i can star putting bits back on :D
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby Sphinx on Wed Apr 19, 2006 9:57 pm

Nice work! :D
Do you have a compressor?
Image
You can use my car when you prise the keys out of my cold dead hands
Sphinx
Elite Post Master
Elite Post Master
User avatar
Posts: 8815
Joined: Mon Nov 05, 2001 12:00 am
Location: South Drives: depends on the week

Postby jayrs on Wed Apr 19, 2006 10:10 pm

yes mate, there aint much in the way of tools etc my old man aint got, hes a precision engineer by trade and a self taught mechanic and a focking good one at that :wink:
i have a compressor too but its in my uncles garage. as i have no use for it as i use my dads hidrovain compressor as its far better, but it was my dad that sprayed the red with a spray gun, i done the black with a can
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby Sphinx on Wed Apr 19, 2006 10:15 pm

Have a look at my post in general about compressors of ya would mate :D you might be able to answer some questions :D
Image
You can use my car when you prise the keys out of my cold dead hands
Sphinx
Elite Post Master
Elite Post Master
User avatar
Posts: 8815
Joined: Mon Nov 05, 2001 12:00 am
Location: South Drives: depends on the week

Postby jayrs on Wed Apr 19, 2006 10:41 pm

my old mans prob the guy for that but i'll take a look mate
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Sat Jun 03, 2006 10:38 pm

damn this hasnt been updated for a while has it :lol: :lol:

well due to weather, lack of money/time and some other probs not much has been done really.

the engine has been bored, pistons are now on the rods and there coming back to me when a cheque clears but a phone call today said it was ready, not bad going as the guy shut up shop and now does it from home and he only picked it up wednesday night so pleased thats done.

the crank has been ground, but as above due to lask of money and other probs i havent been able to get over to my dads cousin's to collect it along with a passanger wing there too.

any how finers crossed within 2 weeks all will come togethere and it will be making its way back into the bay. but i aint putting money on it! :lol:

under side is being painted tuesday and by this time next week all will be back toget here under there, tank painted and back on and rear beam and lines etc etc

so really apart from cleaning up underside and tanks etc and painting some bits and bobs not much has really got done and im a bit pi$$ed off as i didnt realise so much time had gone by :(

any how im pulling me finger out as i sold the escort i was smoking around in and now (apart from wifes galaxy) im car less, well will be completely when my mate gets back from spain this week and i got to give his car back.
:lol: :lol: :lol: :lol:

no pic's of anything but will do a better update later this week or beginning of next.
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Mon Jun 19, 2006 11:15 pm

right up-date time, got my block, piston and crank back, will start to rebuild the engine nearer the week end as im away for a couple of days this week, how ever there are still things to do like put the new battery tray in, repaint under the car fit the tanks back etc etc but if all goes well it should be back on 4 wheels and running again within a couple of weeks i hope.

then its just body work to do then like fit the new wing, couple of doors ( loads of door marks and a bad hinge on the drivers door)

well pleased with the crank, new mains, new big end and thrust bearings plus the regrind, £135 :)

block rebore and fit all 4 pistons to the rods £140.

painted the block tonight as i got it back at 6pm this evening :lol: so paints still wet in the pic's.

painted up some other bits as your see in the pics below.
the wing was a ebay bargin, £10.50 and its a gen ford part, i won that ages ago but had to get a uncle to pick it up and i collected it from him along with my crank (as it was cheaper regrind over near him) on sat just gone.

for anyone intersted hears some pic's of the bits and some new bits i got from fords. (4 rubber pads for the fuels tank, 4 bolts for fuel tank and a oil cooler hose, was given the wrong one but may as well keep it for £3 :lol: :lol: but ive orded the right one now)
i also painted the EFI part on the top of the inlet, didnt paint or polish the inlet just cleaned it up with a wire brush, same as the thermostat housing.
talking of which, the thermostat was fine as i checked it but i fitted a new rubber seal and spring clip.
still waiting for 2 new rubber donuts for the front shocks, a oil cooler pipe and spring nuts for the petrol tank to come in at fords.
also got a pair of front ARB drop links on there way off of ebay, new of corse :lol: :lol:

BTW i havent cleaned the bores, it still has honeing paste in it.

before repaint
Image
ater
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image


got all of the bits packed up ready to be taken over to my parents house where the engine will be rebuilt :D :D
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Thu Jun 22, 2006 11:45 pm

take it know ones intersted anymore but fock it ill still post up.

few little bits today to finish off, also got 3 therostat housing bolts on order and2 covers for the ball joints.

focking guy in ford tried to rip me again by saying they had to order a min of 10 i wouls would have to pay for all 10, i told him in the nicest way to kiss my ass and he got the message and oreded 3, 1 word, JOBSWORTH!

anyhow all thje bits are together now so the rebuild can now begin

pic of what i got today, but the seal for the down pipe went back as it was to small and they didnt have another, but i aint paying fords £12 plus vat for it when i dont really need it :lol: :lol:
Image
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby onslack on Fri Jun 23, 2006 10:07 am

looking good mate :Q
Image
click My sig -:- Sig made by :- xmadxmoex
onslack
Post Master
Post Master
 
Posts: 707
Joined: Sun Feb 27, 2005 6:58 pm
Location: West Sussex Drives: 2.0 16v Si
Your car: Si

Postby rich_frst on Fri Jun 23, 2006 11:02 am

nice one jay... glad your project is moving on.... and news on a job?? :)
My ProjectS..
Image
viewtopic.php?t=97195&start=0

FORD SPARES - ENGINES-PANELS-TRIM ESCORT/FIESTA/SIERRA ETC RS/COSWORTH/XR
rich
07834862431
rich_frst
Elite Post Master
Elite Post Master
 
Posts: 2792
Joined: Tue Mar 09, 2004 2:28 pm
Location: benfleet, Essex
Your car: mk1 sierra cos, mk2 escort est

Postby jayrs on Fri Jun 23, 2006 4:34 pm

cheers guys, no mate no job as yet, theres nothing really, unless i wanna be a care worker, KP or a waiter or something :lol: :lol:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby j7aoc on Fri Jun 23, 2006 4:45 pm

Nice see the car moving along :) Good luck with looking for a job
j7aoc
Elite Post Master
Elite Post Master
User avatar
Posts: 6194
Joined: Mon Feb 28, 2005 6:52 pm
Location: southampton

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Fri Jun 23, 2006 4:51 pm

j7aoc :Nice see the car moving along :) Good luck with looking for a job


cheers dude, there doesnt seem to be much about but im gunna have a word with job center about getting on some courses.
might go for a mechanics course, i know near enough everything anyway just need the bit of paper to go with it, and if mr blair is paying, why not i say :lol: :lol:

cheers for the loan of the timing disc mate, it arrived today and i shall return it once im done.
thats a point you better PM me your address so i know where to send it :lol: :lol: :lol:
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby j7aoc on Fri Jun 23, 2006 5:39 pm

There's no rush just let me know when your done i will pm my address
j7aoc
Elite Post Master
Elite Post Master
User avatar
Posts: 6194
Joined: Mon Feb 28, 2005 6:52 pm
Location: southampton

Car: 1991 Ford Fiesta RS Turbo

Postby jayrs on Fri Jun 23, 2006 5:41 pm

ok dude, nice one
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby rich_frst on Fri Jun 23, 2006 5:55 pm

well good luck mate.. fingers crossed for ya... :)
My ProjectS..
Image
viewtopic.php?t=97195&start=0

FORD SPARES - ENGINES-PANELS-TRIM ESCORT/FIESTA/SIERRA ETC RS/COSWORTH/XR
rich
07834862431
rich_frst
Elite Post Master
Elite Post Master
 
Posts: 2792
Joined: Tue Mar 09, 2004 2:28 pm
Location: benfleet, Essex
Your car: mk1 sierra cos, mk2 escort est

Postby jayrs on Fri Jun 23, 2006 6:14 pm

cheers dude.
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby rich_frst on Fri Jun 23, 2006 6:15 pm

:wink: :Q
My ProjectS..
Image
viewtopic.php?t=97195&start=0

FORD SPARES - ENGINES-PANELS-TRIM ESCORT/FIESTA/SIERRA ETC RS/COSWORTH/XR
rich
07834862431
rich_frst
Elite Post Master
Elite Post Master
 
Posts: 2792
Joined: Tue Mar 09, 2004 2:28 pm
Location: benfleet, Essex
Your car: mk1 sierra cos, mk2 escort est

Postby knuckles on Sat Jun 24, 2006 11:36 am

Loving the progress with this rebuild. No corners cut is what i like to see. Will be mint when completed.

I still say go back to standard Rs front bumper but thats just my preference. :bonkers:
ImageImage
~nomad~ :Good god I love Clark.
knuckles
Elite Post Master
Elite Post Master
User avatar
Posts: 6841
Joined: Thu May 19, 2005 2:40 pm
Location: Hertfordshire
Your car: Fiesta Rs turbo

Postby jayrs on Sun Jun 25, 2006 1:45 am

knuckles :Loving the progress with this rebuild. No corners cut is what i like to see. Will be mint when completed.

I still say go back to standard Rs front bumper but thats just my preference. :bonkers:


thats right mate, if ya gunna do something, do it right.
and no, im not going back to standard bumper, :lol: :lol:

i would of liked a whole new rear quarter panel not the repair panel but my dad said the repair panel would be easy to do and ive seen his work in the past and trust what he says so decided to go with it.

got a couple of other bits from fords the other day, nothing major, 3 thermostat bolts, and 2 shaped cover plates (pic's to follow) which have never been on my car since the day i got it, and TBH im not sure they were every on the fez, its a little metal plate that clips to the bottom of the hub housing and will sit between that and the rubber of the ball joint, seems to be a good idea so decided to go with it and got a couple, works out to just over £6 with thepair so they best fit :lol: :lol:

also won a pair of complete bottom arms/wishbones for £18.98 off ebay, brand new and that inc post!!
bargin, because when i removed my passange side arm ( which is 5 years old) the rear bush fell out so that was naffe, and for 2 rear and 2 front (best to of done both arms) all 4 bushes from fors would of cost me £18.25 with the vat, so for a extra 73p i got brand new bottom arms, there not a gen ford part and the ball joint on them although is not a FRST one it is the type i use on my fez to combat the camber problem due to being lowered :wink: so a good deal even if the ball joint part last a year, as i have a couple of new ones in the shed :)
jayrs
Elite Post Master
Elite Post Master
User avatar
Posts: 31520
Joined: Mon Apr 19, 2004 10:32 pm
Location: I.O.W
Your car: FRST, XR2, ST170, ST225

Car: 1991 Ford Fiesta RS Turbo

Postby XRMike on Sun Jun 25, 2006 11:03 am

Looking good mate,as said its nice to see somthing being done properly, with lots of time and effort put into it. :)
Image
XRMike
Elite Post Master
Elite Post Master
 
Posts: 2488
Joined: Thu Jun 09, 2005 6:05 pm
Location: North Wales Party's: All the time

Car: 1991 Ford Fiesta RS Turbo

Postby XRMike on Sun Jun 25, 2006 11:03 am

Looking good mate,as said its nice to see somthing being done properly, with lots of time and effort put into it. :)
Image
XRMike
Elite Post Master
Elite Post Master
 
Posts: 2488
Joined: Thu Jun 09, 2005 6:05 pm
Location: North Wales Party's: All the time

Car: 1991 Ford Fiesta RS Turbo

PreviousNext

Twitter

The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R

17:44, 4th December 2021 Twitter Web App

To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP

17:42, 4th December 2021 Twitter Web App

Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/

RSS Feeds

Subscribe to the RSS feed

What is RSS?

RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.

To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.