fiestaturbo.com

[creator]

Looks proper mate

[Ruishy1]

inlet looks good, where did you get the bellmouths ?

[Excursion]

Ahh, a decent inlet

[crazycage]

now running 1.7bar and it feels SOOOO much stronger spinning the wheels all the way through 4th gear tho somthing its never done EVER..... , only on my t1r's not the 888s but it used to grip half way through 3rd on them @1.4bar.

the engine is loving it and with every few lb's of boost it goes lean letting me know its making more power.not bad for a home build /mapped car

[crazycage]

inlet looks good, where did you get the bellmouths ?

whats a bell mouth ?

[luca]

Great news mate! Well done

[Ruishy1]

inlet looks good, where did you get the bellmouths ?

whats a bell mouth ?

the velocity stacks inside the plenum

[crazycage]

inlet looks good, where did you get the bellmouths ?

whats a bell mouth ?

the velocity stacks inside the plenum

hungary.

[Ruishy1]

thanks, car is evolving well, must be great to have the time to do this

[creator]

Awsome news with the power mate can't wait to see this in October

[crazycage]

Awsome news with the power mate can't wait to see this in October

im so looking forward to going mate pop over and say hi this time tho even if im under the bonnet or crashed out in the car ect

[luca]

Awsome news with the power mate can't wait to see this in October

October ?????

Is Gary having a birthday party!

[crazycage]

may put it on a dyno before the pod

[luca]

Do it mate be intersting to see the power and graph. Im hoping to have mine on the dyno this week to see what the exact power currently is.

[FRSJON]

nice one gary,ill be at the pod in october as well! see ya there!

[scouse-sambo]

Do it mate... would be very interesting to see what this things putting out now for a home mapped car

[creator]

Awsome news with the power mate can't wait to see this in October

im so looking forward to going mate pop over and say hi this time tho even if im under the bonnet or crashed out in the car ect

i will make sure i do this time mate nearly everytime iv been to see you,you have been ill i wouldnt mind if you was under the bonnet but when you look like death (no offence) i thought id give it a miss mate seeyou in there

[creator]

Awsome news with the power mate can't wait to see this in October

October ?????

Is Gary having a birthday party!

luke i think im having a blonde moment please explain

[luca]

Awsome news with the power mate can't wait to see this in October

October ?????

Is Gary having a birthday party!

luke i think im having a blonde moment please explain

Whats happening in October???

[creator]

October ?????

Is Gary having a birthday party! [/quote]

luke i think im having a blonde moment please explain [/quote]

Whats happening in October???[/quote]

oh right sorry mate i get you now lol 24th october santa pod, you and gary going for it or did you forget

[luca]

October ?????

Is Gary having a birthday party!

luke i think im having a blonde moment please explain [/quote]

Whats happening in October???[/quote]

oh right sorry mate i get you now lol 24th october santa pod, you and gary going for it or did you forget [/quote]


Do I even have a car!

If i can find it I shall pop along.

[creator]

I have faith luke

[crazycage]

I have faith luke

im told his clutch came today

[creator]

I have faith luke

im told his clutch came today

he has more than enough time now then

Have you done any more mapping yet mate? What sort of boost will your turbo run out of puff at?
Have you thought about getting a set off different cams to see how much benifit you can get out of them?

[jonyb4]

nice handy work on the inlet

and well done for holding it at 1.7bar

[crazycage]

I have faith luke

im told his clutch came today

he has more than enough time now then

Have you done any more mapping yet mate? What sort of boost will your turbo run out of puff at?
Have you thought about getting a set off different cams to see how much benifit you can get out of them?

hoping to finish the mapping off this weekend not sure on boost but i will run it at what ever i can

will have a new inlet on end of this year then look into cams early next year if i have no prob's with the engine

[creator]

nice one mate we shall wait to here what you got it running like then mate over the weekend
iv been talking to ian about cams but he said he wanted to know the rest of my engine spec to tell me whats best but im still so undecive of turbo ect to run yet

[crazycage]

nice one mate we shall wait to here what you got it running like then mate over the weekend
iv been talking to ian about cams but he said he wanted to know the rest of my engine spec to tell me whats best but im still so undecive of turbo ect to run yet

decide what power you want then lol
far to wet here for any mapping this weekend but theres only a little left to do, ill do it on the way if i have to
need to pull my finger out and fit the new box

[creator]

decide what power you want then lol
far to wet here for any mapping this weekend but theres only a little left to do, ill do it on the way if i have to
need to pull my finger out and fit the new box [/quote]

i know mate but i keep seeing you develop yours so much then luke the same and the blackpool crew i just cant keep up with you lot .
yeah its been pissing it down here all weekend n all mate tbh proper crap weather,and id love to see that you coming screaming past all wired up and det cans on going down m1 mate lol.well youve got about 3 weeks to get the box in mate so no rush lol.

[crazycage]

decide what power you want then lol
far to wet here for any mapping this weekend but theres only a little left to do, ill do it on the way if i have to
need to pull my finger out and fit the new box

i know mate but i keep seeing you develop yours so much then luke the same and the blackpool crew i just cant keep up with you lot .
yeah its been pissing it down here all weekend n all mate tbh proper crap weather,and id love to see that you coming screaming past all wired up and det cans on going down m1 mate lol.well youve got about 3 weeks to get the box in mate so no rush lol.[/quote]
the police stoped me out mapping one night because the inside of the car was lit up like a christmas tree from the laptop and i was driving with my foot on the brake

[creator]

the police stoped me out mapping one night because the inside of the car was lit up like a christmas tree from the laptop and i was driving with my foot on the brake [/quote]

haha I bet they were thinking what the fooks going on here lol.when Jano mapped my rs turbo we were getting some funny looks from people with all the gauges and computers on his knees and det cans on lol

[crazycage]

car all mapped just need to swap the gearbox next weekend when i ran at central day this year boost was peaking 1.5bar holding 1.33 with a terminal of 123mph now its peaking 1.81 holding 178 so 128mph terminal would nice
also fitted a shift light just for when im at the pod

i cant run any more boost without putting more pre load on the actuator but that will increase my low boost of 1.1bar and i want that for getting it off the line nice in 1st and 2nd gear
also on the the dada log loading it up in 4th gear from 4k to 7200 took 4.1sec's holding 1.8bar and holding 1.5bar it took 5.4sec's so deffo more powerfull

[jimmyesh]

128 MPH terminal - not many will expect that from a FWD MK3 Fez!

Great stuff mate.

[crazycage]

just got to nip out at 9am and get 2.l of mt75 gearbox oil , so i can swap my box over ready for next weekend at the pod

[creator]

Nice work mate big boost hopefully seeyou next weekend mate