fiestaturbo.com

[mrviper]

hello there!

iv been sent over here by the xr owners club and say you peeps can help me out with this and a contact nimber for someone called inan howel ?

i have a mondaeo 2.0 engine from a p reg 80k miles on order to drop in to my xr2i

now to avoid messing about with wires and ecu etc.. i want to fit the cvh manifald on to the zetec lump then get a bayjoo chip and a dyno sesh (maybe not entirly needed)

i know its posible because people have done it with turbo's

as far as i understand all i need is some spacers of some sort

or another route will all the injectors/sensors work with an escort 1.8 manifald with some rewiring but i'd asume that theae sensors give different readings to the ecu compared to the cvh one (maybe posible to nick some cvh sensors?)

put my brain at rest ant tell me what to do!!

/bangs head on wall

thanks in advance dudes!

[Project]

Imho I recommend you fit the 16v manifold and the 8v fuel rail.

Kiiiinda like this...

[chumkila]

Ian Howell's contact details can be found on http://www.zetecturbo.com

[MikeyXR2i]

HI Al, i might be wrong, but has that 8v Fuel Rail been mounted the other way round?

[Project]

Correcthamundo

Held in place like this:



Al

[Ian C70T5]

Also, note this is not a Zetec E engine so needs more work AFAIK

[Ian C70T5]

Also, note this is not a Zetec E engine so needs more work AFAIK

[Phil Si]

Also, note this is not a Zetec E engine so needs more work AFAIK


thouhgt i'd make it a hat-trick

[MikeyXR2i]

Correcthamundo

Held in place like this:



Al

Thanks for that Al.