fiestaturbo.com

[ianFRST]

your mobile aswell then?

[Captain Tightpants]

your mobile aswell then?

That was at our local dragstrip/airfield.

We are mobile too.

Steve

[heeman10]

Max - As Steve said, that was at our local drag strip. http://www.streetnights.com.

Ian - I've tried getting in touch a couple of times over these last few weeks to discuss the Focus, have you had any PMs or emails from me?

[ianFRST]

no mate, no pm's on here

[heeman10]

PM sent matey

[ianFRST]

yeah got it now, replied

[jos310581]

I take it you living round these parts now??? Looks like a good set up you both got.
I really hope it goes well for you both.

[heeman10]

jos310581 - Yep, I made the 295 mile move back in the second week of August, a great decision I certainly don't regret! The place is getting better and better with every day, it'll soon be ready for the mags to come in with their cameras to spread the word far and wide Thanks!

[jos310581]

Nice, Lets hope the word gets across the country, I might pop in some time
and see how much an engine swap is as most other places cant be arsed to phone back.

I Really hope you guys get on as I know how hard it is for
a business to take off, but I'm sure you do really well.

[:: blade ::]

cool, hope all goes well with it might bring my pug down sometime in the future

edit: just realised its about a 3 hour drive for me :'( you never know tho

[heeman10]

jos - Cheers buddy, you know the number to call when the time comes!

blade - A bit of a trip from Manchester, yes! Don't let me stop you!

[FezzR]

Awsome guys, Nice to see progress like this. Hope this venture goes from strength to strength. If im ever in the same Hemisphere ill be sure to drop by!.

[MotorcyclesFish]

I fully intend to patronise your establishment in the near future.

Best of luck chaps, I'll be supporting your efforts in any way I can.

[filtra]

Good to see the website up and running.

Do you offer a 'setting-up' service if it is found that a car is running rich/lean. Reason I ask is that I would like to get my FRST running optimally after I service it in a few weeks.

Regards

Fil

[dawsfezzie]

what is the website i cant find it!!

[Max M4X WW]

http://www.for-tunepve.com/

[heeman10]

Ian - Cheers dude, for all the right reasons, I hope you never do come back! Seems you're having a good time down there!

Grant - Nice one, I'll see one of your FWD or RWD cars, or botormike some time then!

Mr Enjin - We do indeed A set-up is £125, and includes a cylinder compression test as well as checking and adjusting fuel and boost pressures. You can get in touch via PM, phone or email, just check the website when the time comes and get in contact in whichever suits you best!

Cheers for that Max!

You can find us at http://www.for-tunepve.co.uk and http://www.for-tunepve.com, contact details and pricing are on there, more content will be added in the future

[Ollybee]

Definately needs some pics on the website James, but looks really slick.

[heeman10]

Yep you're right, I'll try to get some up before next week's out, get some shots up of some of the cars we've had in, maybe a few videos too!

[Sphinx]

Get back to work!

[dawsfezzie]

so im sure everybodies been waiting to ask this!! how much would you do a zt conversion for?? say if i got all the parts etc??

[Brammer]

Just popped in here to see how things are going mate??? website looks tidy,fresh with a usable layout, agree wants some pics but all in good time.

well done lads

[MENTAL]

Allright gents, Was just looking through your website, Not bad

[BALBOA RS]

Website is looking good, pics & vids would be ace aswell

Mr Heeman10 you have pm

[Captain Tightpants]

Thankyou for your kind comments Mr Balboa!

Steve

[Brammer]

I actually thought the £40 odd was cheap for the type of business it is, if you've ever had an engine built by a pro or know of someone then you will relise reality about labour charges, 10 years ago i had a near race spec cvh built by collins and the complete build came in at just shy of £3k and my mate YB came in at £6k, i would say 65% was labour charge .

Ten least expensive regions by hourly rates
1 Fife £55.40
2 Pembrokeshire £56.83
3 Angus £57.98
4 Aberdeenshire £58.94
5 Highland £60.01
6 Lancashire £61.67
7 Cumbria £62.44 - I will say run of the mill garages in cumbria don't charge that - main dealer only
8 Northumberland £62.49
9 Cornwall £62.68
10 Perth & Kinross £62.88

[heeman10]

dawsfezzie - That depends on what you need doing! Drop one of us an email if you do want some work doing, detailling exactly what it is you need doing

Mr Brammer - Cheers Pics and vids will certainly come, we have a few half-decent photo's to put on there now, and will get more videos in the near future. Thanks for the support.

Announcement

Do we have many Redline magazine readers in here? Look out for us in the issue released on December 15th, as we conducted the Honda Civic Type R air filter comparison test for them, and will probably get involved in future tests of a similar nature

[mart33]

hi im fairly new to the site but just had a look at the site looks good hope u do well with it .
mart

[BALBOA RS]

Thankyou for your kind comments Mr Balboa!

Steve

No problemo. I look forward to spending £42.50 per hour on you to work on my car in the near future

Ross.

[mike_wall15]

Announcement

Do we have many Redline magazine readers in here? Look out for us in the issue released on December 15th, as we conducted the Honda Civic Type R air filter comparison test for them, and will probably get involved in future tests of a similar nature

Ah so that was why you needed my reg!
I didn't realise you were doing a test on air filters. I use the K&N panel as I didn't want to replace the standard panel filter. Not sure if I can feel much difference. Does this test try out some induction kits?

PS. If I buy a copy can I get it signed?

[The Stig]

tidy stuff lads

[heeman10]

Mike - We were testing air filters only, though the car owner had an AEM induction kit on there as it happened, so we threw that into the test as well. And of course I'll sign a copy of the issue, just for you babe! I've just remembered I had a text from you when I was half-asleep. Can't say I know what exhaust systems work best on the ZS, but having the stock tailpipe welded on is always an option. Good luck judging whether or not it's level or not - that oval is most confusing on the eyes!

Mr Stig - Tidy indeed

Update

I've put a few photo's in a gallery, but the format will be changing soon, so they're not in a big long line! I've also stuck a links page in to support the forums/companies we see fit

[black2]

James,

long time no ummmmm speak, lol.

I will defo be coming up to you in the Spring, thats when the FRST is put back on the road and i would like a full set up, it needs some tweeking as the idel is lumpy. Previous to our old conversation about the "specilist" i went to before

Cheers,

Gareth.

[mike_wall15]

Mike - We were testing air filters only, though the car owner had an AEM induction kit on there as it happened, so we threw that into the test as well. And of course I'll sign a copy of the issue, just for you babe! I've just remembered I had a text from you when I was half-asleep. Can't say I know what exhaust systems work best on the ZS, but having the stock tailpipe welded on is always an option. Good luck judging whether or not it's level or not - that oval is most confusing on the eyes!

I'll have to remember to buy a copy and save it for the autograph, cheers buster!

Lol at forgetting the text. I have decided to leave it at the moment and wait for MOT time. Yes, welding the tailpipe on is a serious option, and no, I won't be mucking it up! I got good eyes you know!

(Just looked at website for first time, nice work )

P.S. If you get a show/demo car next year for some shows then don't hesitate to ask me to give it a bit of polish

[Max M4X WW]

MIKE - Milltek! Only option, Get my tailpipe, its not oval but will look great. Their oval one is a bit bigger

This gives a fairly good impression of the sound, I think..

http://youtube.com/watch?v=ITFZNGiCERo