fiestaturbo.com

[Matt_fez]

Yeah I know what you mean mate, catch 22 really - there were plenty of bits I wanted to do still, but also really wanted to get it in the mag asap

Always trying to improve it anyhow so I suspect it will never be totally finished - which really pleases my g/f

[muz]

Ah your girlfriend still talks to you then? Mine doesn't

[Ram]

keeps getting better mate

where does the screamer pipe go? is it going into the downpipe or to atmos, cant make it out from the pic

[Matt_fez]

screamer is shooting off into the wheel arch venting to atmos

[Matt_fez]

Well my package from Jenvey arrived yesterday and what a sweet bit of kit that is. I know it is expensive for all the bits and pieces but it really does look like it's going to be money well spent






Test fit fuel rail and fpr





We shall see how it performs with a rr session next month. They are getting some (chassis-dynamics?) rollers at Devil-Developments next month so we can have a play when they arrive

My new brake master cylinders came yesterday aswell so got them fitted


And finally the brakes, fitted in the rain earlier in the week....hence the rusty effect of the disk




They are a 330mm kit off of a 4x4 sapphire cosworth, so to get them to fit I had to have 5.5mm machined off of the caliper mounting bracket to move the holes further forward and align with the caliper. I also had to fit some 15mm hubcentric spacers with longer studs. Only needed 10mm spacers but nobody makeds them. Et voila!

You like?!

[SEG1]

some bloody good mods their mate.

the manifold looks the dogs! how much was it in the end? is it an off they self product?

[jonboisescort]

awsome that inlet looks the nuts

[FRSJON]

bloody hell matt that inlets the nuts... .. bakes are massive... cant wait to see it sunday...

[cowie20]

that looks the funlumps mate! nice one, what was cost of inlet

[Matt_fez]

cheers fella's, inlet was off the shelf items and came to a grand total of £80 delivered

[FRSJON]

cheers fella's, inlet was off the shelf items and came to a grand total of £80 delivered

£80 delivered??. .. what did you pay someone £80 to steal it?...

[FRSJON]

looking on there site i take it you meant the inlet was £800...

[Matt_fez]

looking on there site i take it you meant the inlet was £800...

Ha ha yeah you're right mate - £80 would have been a right bargain

[Ram]

screamer is shooting off into the wheel arch venting to atmos

you gonna be running the 0-60 at ford fair

[Matt_fez]

Might give it a go mate, I've got to get it put together this week, then a bit of mapping.

Never really been arsed to queue for the 0-60 at ford fair looks like it takes ages and normally quite warm too.

[Ram]

Lots to do then!

know what you mean. Just I haven't driven my car since around central day time so im dying to give it hell. think il just do the 3 runs for £12 then park it up for the day.

[FRSJON]

Might give it a go mate, I've got to get it put together this week, then a bit of mapping.

Never really been arsed to queue for the 0-60 at ford fair looks like it takes ages and normally quite warm too.

be one of the first to do it...like i will be....

[muz]

Inlet and brakes look awsome mate.

[FRSJON]

must be time for a update???... oh ,and sell me your old wheels....

[Matt_fez]

No updates at the moment I'm afraid...although I do have some new pics which I will upload later on when I get 5 minutes.

[MattPym]

Serious job you're making of this lad..Hat off to you

[muz]

Ford Fair. It was hard to get any good pics with the hoards of people around it

[Matt_fez]

nice pics muz cheers

[FRSJON]

looks the nuts....

[- Danny Boy -]

That looks like such a beast of an engine! I WANT IT! lol

[Matt_fez]

Cheers mate, its taken me a lot of scraped knuckles and saving to get to the point its at now, I'm over the moon with it at the moment

Couple of pics I took after Ford Fair...




Need to clean the arch liners and tidy the breather up but apart from that

Not sure if it needs something in front of the oil cooler like a scoop or something? What do u reckon?

[Dave G fsi]

Looking awesome mate

I would put a scoop in if I was you, the more air channelled to the right place the better

[muz]

I think the oil cooler there gets more than enough air through it without a scoop. Maybe some channels though to stop air going round it and only through it.

[Matt_fez]

yeah i know that it gets plenty of air right there, I was thinking more of trying to finish/tidy it up. It kind of looks like it should have something in front of it to finish it off to me.

[Ram]

bays looking sorted

[Matt_fez]

cheers mate. Now on the lookout for a new rad as mine has developed a fast flowing water outlet!! Any recommendations?

[SEG1]

grs do alloy ones and deal with custom designs if needed

[95 Fiesta SI]

Love that picture

[Matt_fez]

grs do alloy ones and deal with custom designs if needed

Hadn't thought of them actually...I'll check out the website now quickly. Cheers

[FRSJON]

cant get that inlet out my head.... soo want one... send jano a pm on OC about GRS stuff as he gets it cheap.... ... and news on a power run...