fiestaturbo.com

[Smo]

Nice package H

Oh, he knows it...

[dontpannic]

What. The. Hell. Is. That...?! Hahahaha


Sent from my Casio FX-83GTPLUS

[Smo]

That's Henry's package... with 90 degree adapter for those hard to reach places.

[Michael!]

Holy s**t that's hilarious

[jonyb4]

Check out his sweater

that's the pipe found in the nearside wing on 1.6/1.7 pumas and fiestas to provide cold air to the airbox

[- Danny Boy -]

Quite literally a third leg!

[filtra]

Check out his sweater

that's the pipe found in the nearside wing on 1.6/1.7 pumas and fiestas to provide cold air to the airbox

What pipe?

[jonyb4]

the one hes holding as a donkey dick lol, goes under the wing, behind the arch liner, then clicks into the air box, took us a few minutes to pull it out of my mates 1.7 puma

[filtra]

the one hes holding as a donkey dick lol, goes under the wing, behind the arch liner, then clicks into the air box, took us a few minutes to pull it out of my mates 1.7 puma

Nope still don't see it.

I do see a big meaty monster dong though!

[Michael!]

the one hes holding as a donkey dick lol, goes under the wing, behind the arch liner, then clicks into the air box, took us a few minutes to pull it out of my mates 1.7 puma

mine fell out and i drove over it...

[dontpannic]

Henry - stop photoshopping your photos to hide the inevitable engine failure.

[hb69]

You bored today Nick?

[dontpannic]

Does it show?


Sent from my Casio FX-83GTPLUS

[hb69]

Yes

If you ever see smoke coming out like that, give it a month and ill have a puma engine in it

[dontpannic]

[jonyb4]

looks like it just sharted in them edits

[hb69]

A few hours with the car, and loads of help from smo this weekend

-Spark plugs done
-HT leads-done
-Auxillary belt-done- actually the easiest belt ive ever been a part of changing, easier than a zetec
-KYB gas shocks front and rear now-done
-Polybushed torque link-done

The only thing we didnt have time to do was the axle spacers, so ill have to try again with those after Ford Fair when ive got a week off work to play around.

By then i may also have the other parts im waiting on, some people know what they are

The only thing possibly pic worthy, aside from smo, is the torque link



Makes things a bit harsher inside, but should be able to handle the punishment maybe a bit better than the standard item, which to be fair didnt look in bad shape.

Only things i plan to do before FF now is put some fuel in it. If it gets a wash it will be at the show on the day, as its raining again

[jonyb4]

good list there

must have been a breeze that belt, as the zetec one is peasy itself

[hb69]

I had forgotten to update this, so a few weeks ago i did ford fair with a track session to give it some abuse. The car was rediculously dirty on the day, so didnt take any pics of it. I found some of me and toby on the circuit though







Not bad pictures to be honest.

I had a week off work after that, and had planned to fit the axle spacers but couldnt be bothered. I did however fit a few bits,

firstly a puma interior light i bought back in March then forgot i had it for a while, then found it, and slotted it in



I also got hold of a non-smokers tray, this along with a lighter bung was a £30 optional extra when the car was new. Much more useful than an ashtray imo and quite rare to see as no one bothered with it. CD tray and coin holders



The only other purchase ive made recently is these



Fiesta ST brake calipers, £35, which is nice.Just need to sort some decent discs and pads now.

Good stuff?

[jonyb4]

wow love that non smokers bit!

those clipers are as cheap as the St170 one i picked up

[hb69]

After id paid for them someone listed some st170 brakes on zsoc, already modified to fit under 15's with good discs and pads for £80 The only thing that puts me off them is having to drill the hub, and i dont want to do that

[jonyb4]

ah yea, what puts me off is, pretty much only Zetec s alloys fit, other wise its a 16"

[dontpannic]

The ST brakes provide decent stopping power on the ST, they'll be perfect on the ZS

[hb69]

They were great on Tobys, just trying to find cheap enough discs and pads. Ford are really rather expensive or id have those

[dontpannic]

Pagid from eurocarparts are OEM quality.


Sent from my Casio FX-83GTPLUS

[hb69]

ill have a gander

[hb69]

Still quite expensive at ECP. Prob going to wait till ive got the money together and get Mintex 1144 pads and some decent discs.

Edit, any recomendations people have I'd be happy to hear experiences

[- Danny Boy -]

I'm running pagid pads with standard ford discs on my st brakes and I can say the pads are really good for stopping

Just thought I would put that random bit of info out there!

[jonyb4]

imm using mintex pads, and (cheapo ebay) Mtec grooved/drilled discs, and the stopping is epic

think its my escort servo doing the hard work though
but the pads seem good for the price, just over £20

ill use mintex when i upgrade to my St170's

[hb69]

So i sold this recently.Got exactly what i paid for it back, so quite happy with that. Enjoyed owning it, managed 4 circuits in it this year, NEVER topped up the oil or needed to and nothing ever broke on it. Just it wasnt quick enough, its replacement is though

[jonyb4]

ah never

come on then spill the beans

[trecoll]

It's like a Golf...

[jonyb4]

YAY

[dontpannic]

It's like a Golf...

Hahaha!


Sent from my Casio FX-83GTPLUS