fiestaturbo.com

by **alladdin** on Thu Jun 01, 2006 10:23 pm

any update on this thread asad ?

by **Max M4X WW** on Thu Jun 01, 2006 10:42 pm

Must be working, Flames on the way to fitp were

Would like to see the manifold on though!

by **purple_fiesta** on Fri Jun 02, 2006 11:05 am

looks brill, defo get a filter on them TB's before it goes up in flames though!

by **Asad** on Fri Jun 02, 2006 1:48 pm

Cheers guys!

Yeah it does pop alot!

Current updates are - not many! lol

I still have the head to put on, and to sort a less restrictive exhaust manifold.

Im also planning on tidying up some under bonnet wiring and fitting an ITG Megaflow Air Filter.

Once all this is done, hopefully i wont be tempted to do any more engine mods! lol

Im aiming to have it all in before Ford Fair and mapping it up too. Want to do some runs there.

Asad

by **ant pittaway** on Fri Jun 02, 2006 4:59 pm

top work as always mate!

by **doggpk** on Sun Jun 04, 2006 11:22 pm

love this thread..top work Asad..u so

by **jim566** on Tue Jun 06, 2006 12:00 am

Even tho i dont drive a fiesta may i congratulate you on your hard work and extremely informative how to. You seem to have made a name for yourself m8 hence i ended up here. TOP JOB

*scuttles off to start work on his mondeo*

by **CyberMODS** on Tue Jun 06, 2006 1:33 am

jim566 :Even tho i dont drive a fiesta may i congratulate you on your hard work and extremely informative how to. You seem to have made a name for yourself m8 hence i ended up here. TOP JOB

*scuttles off to start work on his mondeo*

now thats a proper 1st post

welcome to the board mate

by **Asad** on Tue Jun 06, 2006 7:21 am

jim566 :Even tho i dont drive a fiesta may i congratulate you on your hard work and extremely informative how to. You seem to have made a name for yourself m8 hence i ended up here. TOP JOB

*scuttles off to start work on his mondeo*

Cheers for all the comments!

Was definitely a top project and getting more and more popular!

Let me know if you need a hand :wink:

Asad

by **ScottP** on Tue Jun 06, 2006 7:41 am

Keep it going ASAD cos I'll need your help in a few years when i get my 1.6 SE, lol

Scott

by **escortbreakers.co.uk** on Tue Jun 06, 2006 6:00 pm

ive got a 2.0l zetec running megasquirt.
ported and polished head, 2050cc, kent cams and pulleys, 4-2-1 manifold, higher compression, large exhaust system.
badly needs more mapping tho.
also i will be fitting honda fireblade throttle boddies later this year.

by **krestudon** on Sat Jun 17, 2006 3:30 pm

asad; in your megasquirt, do you changed r4 and r7 resistors from the original values to the 27k ohm recomended for ford sensors, and then calibrate with easytherm, or only calibrate with original resistors, or how do you did it?

could you give me your config files for that? and your base maps for a 1.8 everything standard?

thanks

by **DJMattyT** on Thu Jun 29, 2006 11:57 am

Hi,

Just change the reisiters to 27k . . noi calibration is needed they will work straight off.

We sell MS ECUs built and setup for Zetecs at http://www..mtechautomotive.co.uk

Have a look . .

Cheers,
Matty

by **krestudon** on Thu Jun 29, 2006 5:06 pm

thanks i already have an assembled MS, all i need now is a base map to start working

i've been looking at your forums but where the 1.8 base map should be, i cant see nothing.

i've tried registering, but i cant log in...

by **ScottP** on Sun Aug 06, 2006 9:03 pm

Any more updates? Any videos?

Cheers

by **jayrs** on Fri Jan 05, 2007 11:09 am

bringing it back.

any updates to this

by **lucasdemoley** on Sun Jan 21, 2007 1:06 am

Any vids? Ive just got myself a set of bodies and read through this entire post, very interesting! No doubt i'll br pestering you with a few pm's trying to set up my ms, if that ok?

cheers!

by **SimonT** on Sun Jun 03, 2007 2:12 pm

is this car still about? wondering what stage its at now

by **muz** on Sun Jun 03, 2007 2:43 pm

Hurry up and do the manifold, I need to know how to do mine lol.

by **AndysFatRS** on Tue Jun 05, 2007 11:33 pm

my mate has a 2.1zetec running gsxr1000 bodies and everything else imaginable as well as megasquirt.
just a quick video of induction noise while mapping around blackpool
http://www.youtube.com/watch?v=hlfpkJxYP3g

by **AndysFatRS** on Tue Jun 05, 2007 11:33 pm

my mate has a 2.1zetec running gsxr1000 bodies and everything else imaginable as well as megasquirt.
just a quick video of induction noise while mapping around blackpool
http://www.youtube.com/watch?v=hlfpkJxYP3g

by **jayrs** on Tue Jun 05, 2007 11:48 pm

thats cool, i would love to be able to have my rs mapped like that

by **Smo** on Wed Jun 06, 2007 12:12 am

andyswidefez :my mate has a 2.1zetec running gsxr1000 bodies and everything else imaginable as well as megasquirt.
just a quick video of induction noise while mapping around blackpool
http://www.youtube.com/watch?v=hlfpkJxYP3g

I'm guessing that gauge on the laptop that's flashing/flicking rapidly is the air/fuel ratio? Is he running narrowband/standard lambda still?

by **AndysFatRS** on Wed Jun 06, 2007 7:17 pm

yeah thats afr. hes running a narrowband sensor thats knackered, but its not running alpha-n yet so it doesnt reference the sensor. although for mapping purposes there is a wideband mounted in the manifold and the reader hanging from the rear view mirror

fiestaturbo.com

Megasquirt ECU Fitted!Throttle Bodies Running!New Head!!PG10

Twitter

Facebook

RSS Feeds

What is RSS?