fiestaturbo.com

[THEHOG~]

Here is my new car a mk3 fez si i bought this car with the current spec all done by hcs pimp the spec inclueds

RIMS
16in TSW rims (white)
Yokohoma parada spec 2 tyres.

BRAKES
Cosworth calipers.
Omp drilled and groved disks.
Omp brake pads.
Goodrich braded lines.

SUSPENTION
H&R coilovers.

POWER
2 litre zetec convertion
K&N induction kit.
Ashally exhaust system. (manifold to back box)
2litre mondeo throttle body.

BODY
standard for now.

INTERIOR
Omp hub kit.
Snap on device
Omp wrc leather deep spoke wheel.
sparco racing harnesses.
stripped interior bar the dash and frunt seats.
sound deadning reamoved

the si when 1st bought

the si when 1st bought

the 1.6 zetec

the si now

the si now

the si now

the si now

[FiestaBen]

Glad you came to FT and nice to know his car is still going - better look after it like he did

Plans sound good, you got any plans for the future?

[THEHOG~]

Glad you came to FT and nice to know his car is still going - better look after it like he did

Plans sound good, you got any plans for the future?

yea its a sweet car i love it so much i have plans to delock the doors and boot sort any tiny bits of rust and fit RST skirts and arches.
Bonnet vents and pins and a full respray i wont to keep the car origanal to a point i dont wont smoothned boots and stuff so the respray will be the same colour but a deeper shade maybe a black with a deep red going thruw it. but at the mo i am perfectly happy with her just need to fit my maf and manifold and its 100%

[FiestaBen]

Sounds good, keep us updated

[THEHOG~]

got my new harnesess sparco 3 points gonna fit them 1st thing in the mourning and new sound system to be put in

[xr2irhys]

what you think to my old coilovers set up ?

[THEHOG~]

what you think to my old coilovers set up ?

were theses yours aii m8 there great not as harsh as i thawt they were goin to be and make it handle ping on to coupled along with a polly bushes set later on and it sgoing to be wicked i think i need to lift the frunt a lil bit as the arches are cutting the frunt tyres a lil bit a few mm should do the trick i just hope it doesnt affect the handling too much i shouldnt think a few mm should be that bad i hope lol lol

[knuckles]

Has anyone realised this is the BEAR

[THEHOG~]

Has anyone realised this is the BEAR

that was the name the last owners name for it wasnt it im not sure

[xr2irhys]

what you think to my old coilovers set up ?

were theses yours aii m8 there great not as harsh as i thawt they were goin to be and make it handle ping on to coupled along with a polly bushes set later on and it sgoing to be wicked i think i need to lift the frunt a lil bit as the arches are cutting the frunt tyres a lil bit a few mm should do the trick i just hope it doesnt affect the handling too much i shouldnt think a few mm should be that bad i hope lol lol

glad u like em u need 2 get a pic for me , i wnna see em all cleaned up

[THEHOG~]

what you think to my old coilovers set up ?

were theses yours aii m8 there great not as harsh as i thawt they were goin to be and make it handle ping on to coupled along with a polly bushes set later on and it sgoing to be wicked i think i need to lift the frunt a lil bit as the arches are cutting the frunt tyres a lil bit a few mm should do the trick i just hope it doesnt affect the handling too much i shouldnt think a few mm should be that bad i hope lol lol

glad u like em u need 2 get a pic for me , i wnna see em all cleaned up

sure thing m8 al try get it done tomorow depends how cold it is lol

[xr2irhys]

cool as lol , id love them back some day , but prob cant afford them

[THEHOG~]

cool as lol , id love them back some day , but prob cant afford them

well m8 if there ever on the sale al give 1st offer straight away

[xr2irhys]

cool as lol , id love them back some day , but prob cant afford them

well m8 if there ever on the sale al give 1st offer straight away

well reply will more than likley be urmm im skint hsc pimp paid 160 with swap for standard suspension n some 60mm springs

[THEHOG~]

cool as lol , id love them back some day , but prob cant afford them

well m8 if there ever on the sale al give 1st offer straight away

well reply will more than likley be urmm im skint hsc pimp paid 160 with swap for standard suspension n some 60mm springs

lol did he there really good value for the money like a love them i think i will stick with coil overs from now on i think my next pair will be some gaz 1ns depends if i track the car really

[THEHOG~]

thawt i would post a few of the mods i have planed

exterior
de lock doors and boot
frst arches and side skirts
cosworth splitter
twin head lamp
bad boy bonnet brows
s1 s2 erst bonnet vents
aero bonnet catches
mk 5 fez rear wiper
white clusters
full respray same colour round about but a deeper shade i think
i dont want to go to far from origanal with the si's exterior or interior like smooth tail gates and stuff nah not for me

interior
for the interior i am going to do a bit of colour change nothing drastic i am goin to itraduce a bit more black in the interior to go with the blue colour i will do this by spraying some of the panals black and leathering my frunt door cards i am also thinking of leathering the parcell shelf and roof pannal but i am chewing on it (may just look stupid) lol
also there will be a full fli sound system
stealth parcell shelf
racing harnesses
and a few more lil touches i am undecided at the mo

performance tbc

[THEHOG~]

fitted my new harnesses today but didnt have time do my sound system but will do 1st thing in the mourning

[xr2irhys]

looks good them harness pads are they the ripspeed rs new logo leather ones , did u get em or they in the car when you brought em ,

i have a set in my car

[THEHOG~]

and xr2irhys i took the wheel of to clean them up and took a photo to see how bad they were becase it was dark in the wheel arch and i couldnt see and i looked at the pic and tbh m8 a really cannot be chewed tonight but am planing to take them off any way and give them a clean up by the end of the week so i will post some pics when i have finished

[xr2irhys]

s

and xr2irhys i took the wheel of to clean them up and took a photo to see how bad they were becase it was dark in the wheel arch and i couldnt see and i looked at the pic and tbh m8 a really cannot be chewed tonight but am planing to take them off any way and give them a clean up by the end of the week so i will post some pics when i have finished

ok m8 lol i just posted too at same time lol look up

[THEHOG~]

there rs ones m8 but not the genuine ford rs pads there from halfords but there leather and have rs written on good enuf 4 me lol i like the harnesses but i only run them on my seat as there a bit of a fuk on to live with every day compared to the standard seat belt but there safer so its all good and along with my si seats they keep me pined in the seat like

[xr2irhys]

yeah i know they are , i work at halfords i brought myself a set too from there as the logo rs i thought oh ford that will go nicely with the car coilovers look more dirty than before lol

[THEHOG~]

are rite s**t miss understood lol yea aii seen them in halfords and thawt thaey would go good wi the car and cheap 2 i seen a pair of ford rs pads in black leather for £30 i couldnt belive it £30 bloody notes for harness pads so when i seen theses 1ns i scooped then up i think i only paid like £5 £6 as the box was damaged and it looked faded but the pads inside the box were fine

[THEHOG~]

yea the coilovers are lookin a bit dirty like al get them spick and span soon enuf

[THEHOG~]

my new sound system minus the twin 16in sub box it is a fli set up with a 900 watt amp and 375 watt mids and 180 watt frunt speakres i was going to run the sub box 2 but now i have a 2 litter i rather save on the weight now all i need is a stealth parcell shelf to fit the mid speakers into as the standard parcells shelves are way to flexible

[xr2irhys]

ive got nice home made solid mdf parcel shelf if u wna buy that for the 6x9s

[THEHOG~]

na m8 i have already bought 1 i just need to gg and collect it but havent had time lol

[jayrs]

nice to see it back on here.

the cossis spliter looks very good on the si bumper too

[THEHOG~]

yea i have had a bit of thawt and i think at 1 point i will fit 1 they do look good on the fez and they are bolt on's so i can take it off at any time unlike a bonded spliter always cracking and that

[THEHOG~]

i was having thawt about a mk 5 bumper 2 but i think it will look crap wi the si frunt bumper but with the splitter on it may look ok i dont know will see when i get there

[YoungRogue]

my fiesta has si front and mk5 back bumpers looks alright

[THEHOG~]

my fiesta has si front and mk5 back bumpers looks alright

aii well do you have any pics as i would love to see a pic of what it looks like it would be big help in making my mind up

[THEHOG~]

fitted rca leads and tidyed up wiring and mounted my amp all that is left is to fit the head unit adapter and fit speakers to parcell shelf and then fit it to the car and my sounds are taken care of

[THEHOG~]

got the iso conecter for the head unit but ut is stupidly long so i will have to shorten to get it to fit behind the head unit going to do it now infact y not am doin nowt and got my parcell shelf just need to fit the 2 pairs of speakers to it and install

[HCS PIMP]

lol ur progressing it well although i see its going to be a track / max car lol