fiestaturbo.com

[mikeymikeyp]

yeah a mk3 cvh mount, i have one of them spare

any chance of a pic of the cvh mount you have got

[Gus!!]

Overriders fitted, I think they look pretty damn cool!! Went for a drive and took a few photos!!




I just need to take the piping off the other bumper and put it on this bumper!!

[fastfezz]

looking good mate glad you kept it and has your overiders got the washers in them like mine or not and there's also a gallery on here of a 1.6s give me a min and il find it for you

[fastfezz]

Ive got a few pics that iv got

Sent from my GT-I8190 using Tapatalk

[Gus!!]

That 1.6s is awesome!! Love Matisse blue!! Yours?? My overriders don't have washers, I was wondering about that actually, seemed a bit weird??

[fastfezz]

Noo not mine there was a post about his build and he decided to strip it and yeahh that is abit weird i saw a set like your on ebay but atleast you dont have to plum them in haha and can you you post a close pic of them i dont think i got mine sitting straight thanks

Sent from my GT-I8190 using Tapatalk

[Gus!!]

Would be cool to have jets in them though!! What angle do you want a picture from!! Why would you break that 1.6 s?? It looks lovely!!

[fastfezz]

Yeahh but got to figure out how to plum them in and from the top of the bumper have you got them lined up with the edge at the top of the bumper ?

Sent from my GT-I8190 using Tapatalk

[Gus!!]

Fitted some spot lights today!! I love it, got my top mount bushes in the post too so shocks will be going on at the earliest opportunity!!

[Christina]

Oh they are nice! Get some daylight shots!

[Gus!!]

I haven't even seen them I the daylight yet!! they good down country lanes though!! I can see everything!!

[fastfezz]

loving the spot lights real retro now . if I was to put my washer jet overrides up for sale would you be interested in them? just a thought

[Gus!!]

Cheers mate, they are bright too!!
Probably wouldn't be interested mate I cba to plumb them in!!

[fastfezz]

Haha dont blame you either mate

Sent from my GT-I8190 using Tapatalk

[Gus!!]

A few pictures in the daylight, one of the fogs has obviously leaked in the past and has some rust inside, I'm hoping I can sort it. If not I'll probably get some new fogs to fit to these brackets!!

Also note the rust starting to appear on the bottom of the valance, seems to be only surface rust but is still worse than I thought

[fastfezz]

I am loving the front end of this car now and that fog with the rust in it would do my nutting

[Gus!!]

I am liking it too!! They make me smile down country roads now being like daylight at night!! I'll probably have to find some new fogs I reckon as the rust makes one slightly brighter than the other!!

[dontpannic]

They're not foglights, they're driving lamps - supposed to come on with the high beam.

Front end looks good!

[Gus!!]

Tbh I normally call them spots not fogs. Mine are wired up to a switch as this it how my old fogs were attached on the is bumpers, was just easier to use the wiring that was already there

[Excursion]

Love the carb'd Ghias

[Smo]

Love the carb'd Ghias

They go soooo much better than the fuel injected 1.1s!!!

[Excursion]

Love the carb'd Ghias

They go soooo much better than the fuel injected 1.1s!!!

Yeah, 1.1 CFi = completely gutless.

[Gus!!]

Seems revvier than my old 1.3 but is still slower!! If I could find a decadent car bed cvh I'd probably settle for that instead of a zetec!!

[Smo]

Do the Zetec.

CVHs were OK, and I'd still like to build a 1.3 CVH turbo just to see how well it goes before it goes bang but the Zetec offers so much more for your money. They're reliable, they take a lot of abuse, they're easier to find and replace, and everything's there to make one pop straight in.

CVHs are few and far between now, most of them are well past their best, and you'll be pretty bored quickly.

Stick a 2.0 in it

[Gus!!]

Ideally I'd like a rotten si or other mk3 with a 1.6 zetec, so I'd have all the pipes, loom, exhaust rad etc off that, then swap the water pump and oil pickup to a 2.0 engine. Then all I'd need is a HO inlet and mondeo ecu?? Plus also some serious electrical luck to wire the si loom to my interior loom, unless it's easier to take the dash out and swap the lot?? Oh and brakes. And a clutch. And arb's!! List gets longer

[Christina]

I reckon it's about time you updated that signature of yours!

[Christina]

I reckon it's about time you updated that signature of yours!

[Gus!!]

This I true, but I don't have a clue with Photoshop and someone had to make the last one for me!! I did have one from ford fair with white pepperpots on somewhere!!

[Christina]

Photoshop is fun

[Gus!!]

If I send you a picture to set as a sig can you change it for me??

[Christina]

How do you mean?

[Smo]

I'd just use the one she's done for you there!

[Gus!!]

I will use it yeah

[Excursion]

Straighten your bloody numberplate!

[Gus!!]

It annoys me too!! It needs another screw as one is so f**cked you can't screw it in or out, it's actually level, just not wound in very far on one side so it looks wonky!!