My Fiesta st (20th Jan, update lots of little mods)
80 posts • Page 3 of 3 • 1, 2, 3
Re: My Fiesta st (new wheels fitted 18/3/2009)
dontpannic :I like how "teh evilz lolcat" made it into the photo too
"I'm next to ur car, steelin urz pikturs"
At first glance I thought it was a beam breaker, such as those used in hillclimbing! I wonder when they'll make it onto "modded" cars, a bit like unncecessary bonnet pins and harness pads, trying to add some "race" to the car!
- heeman10
- Elite Post Master
- Posts: 28746
- Joined: Fri Nov 08, 2002 5:32 pm
- Location: Somerset
- Your car: Audi TT TDI Quattro S line
Re: My Fiesta st (6th of Jan Manifold and decat have arrived)
i havent update for a while as i was going to sell the st as i havent used for a month but i got it on the road again to today and remembered why i bought it in the first place so iv got the bug again now and have just bought some wp pro 6 pot calipers and 328m rotors and bells se cond hand for a good price http://pumabuild.co.uk/catalog/product_ ... ts_id=1104
17" Team Dynamics Pro Race 1.2 , 57I K&N , GGR Cat Back
- donk1
- Senior Poster
- Posts: 480
- Joined: Wed Dec 05, 2007 10:04 pm
- Location: Ashford,kent
Re: My Fiesta st (8th of mar Wp Pro 6 Pot 328mm Rotors)
What you doing with standard brakes?
2014 Fiesta ST3 & Mk6 Fez ST
- mrorange2
- Elite Post Master
- Posts: 2807
- Joined: Sat Dec 03, 2005 7:42 pm
- Location: Doncaster\Scunthorpe
- Your car: 2014 Fiesta ST3, Mk6 Fez ST
Re: My Fiesta st (8th of mar Wp Pro 6 Pot 328mm Rotors)
slighty confusing hwo you feel like selling it all the time then decide not to and then want to buy something rediculasly expensive for it straight away
how ever its a nice looking car, dont see why you'd wanna sell it lol
how ever its a nice looking car, dont see why you'd wanna sell it lol
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: My Fiesta st (8th of mar Wp Pro 6 Pot 328mm Rotors)
jonyb4 :slighty confusing hwo you feel like selling it all the time then decide not to and then want to buy something rediculasly expensive for it straight away
how ever its a nice looking car, dont see why you'd wanna sell it lol
i get bored of cars very quickly iv had the st for over a year now and thats a record before the st i had a different car every 3 or 4 months and the price i got the brakes was a bargain less than half what pumabuild are selling them for but i did order a set of gaz gold coilovers today and they werent cheap
17" Team Dynamics Pro Race 1.2 , 57I K&N , GGR Cat Back
- donk1
- Senior Poster
- Posts: 480
- Joined: Wed Dec 05, 2007 10:04 pm
- Location: Ashford,kent
Re: My Fiesta st (15th of mar Gaz Gold Coilovers ordered)
i havent updated for a while as i sort of lost intrest for a while but iv got the bug again.
the spec of the car so far
Painted front head lights
Painted gloss black grills
GGR cat back
Miltek de-cat
Miltek 4-1 manifold
K&n 57i
Gaz gold Coilovers
Fiesta St500 wheels with yoko parada spec 2 tyres
the st has been of the road for a month now as iv got a saxo vts i bought for a winter runabout and a mr2 turbo which iv got someone coming to buy tonight.
so as iv got a second car i want to do a few things to it over the winter.
1. Change the cat back for either a piper 3.5" outward rolled system or a miltek black line (sain black ceramic coated tail pipe) sytem
2. Give the plastic grills a respray as they have a few stone chips now.
3.Drop it a bit lower its lowered about 40-45mm i think it will handle better another 10-20mm lower
4. Get a whiteline rear antiroll bar to get rid of the bodyroll
5.im trying to find a second hand supercharger kit at the moment . iv thought about it for a while now and the only thing i can really do to the st now is cams /uprated valve springs ,cosworth inlet and a custom remap which should see me to about 200bhp and all of that will cost about £1500 if i fit the parts myself. iv seen second hand supercharger kits going for that much and that should give me about 260bhp with out cams and cossie inlet manifold.
Pics will be up soon
the spec of the car so far
Painted front head lights
Painted gloss black grills
GGR cat back
Miltek de-cat
Miltek 4-1 manifold
K&n 57i
Gaz gold Coilovers
Fiesta St500 wheels with yoko parada spec 2 tyres
the st has been of the road for a month now as iv got a saxo vts i bought for a winter runabout and a mr2 turbo which iv got someone coming to buy tonight.
so as iv got a second car i want to do a few things to it over the winter.
1. Change the cat back for either a piper 3.5" outward rolled system or a miltek black line (sain black ceramic coated tail pipe) sytem
2. Give the plastic grills a respray as they have a few stone chips now.
3.Drop it a bit lower its lowered about 40-45mm i think it will handle better another 10-20mm lower
4. Get a whiteline rear antiroll bar to get rid of the bodyroll
5.im trying to find a second hand supercharger kit at the moment . iv thought about it for a while now and the only thing i can really do to the st now is cams /uprated valve springs ,cosworth inlet and a custom remap which should see me to about 200bhp and all of that will cost about £1500 if i fit the parts myself. iv seen second hand supercharger kits going for that much and that should give me about 260bhp with out cams and cossie inlet manifold.
Pics will be up soon
17" Team Dynamics Pro Race 1.2 , 57I K&N , GGR Cat Back
- donk1
- Senior Poster
- Posts: 480
- Joined: Wed Dec 05, 2007 10:04 pm
- Location: Ashford,kent
Re: My Fiesta st (20th Jan, update lots of little mods)
time for a little update for the new year
1.changed the ggr exhaust for a milltek cat back . love the sound of the milltek exhaust has rasy rally car like note to it
2. lowered the car another 20mm and stiffened the rear damper feels really planted in the corners now
3. fitted a 60mm throttle body from the 2.3 duratec engine . i havent had a chance to test it out yet to see is it feels any different
4. got 12.5 mm rear axle spacers still to be fitted (should be done by the weekend )
5. iv spoke to jamsport about the 24mm whiteline arb but they havent got any in stock at the moment but should have some in within the next couple weeks .
6. iv got a frs front splitter on order so that should be with me in the next couple weeks
1.changed the ggr exhaust for a milltek cat back . love the sound of the milltek exhaust has rasy rally car like note to it
2. lowered the car another 20mm and stiffened the rear damper feels really planted in the corners now
3. fitted a 60mm throttle body from the 2.3 duratec engine . i havent had a chance to test it out yet to see is it feels any different
4. got 12.5 mm rear axle spacers still to be fitted (should be done by the weekend )
5. iv spoke to jamsport about the 24mm whiteline arb but they havent got any in stock at the moment but should have some in within the next couple weeks .
6. iv got a frs front splitter on order so that should be with me in the next couple weeks
17" Team Dynamics Pro Race 1.2 , 57I K&N , GGR Cat Back
- donk1
- Senior Poster
- Posts: 480
- Joined: Wed Dec 05, 2007 10:04 pm
- Location: Ashford,kent
Re: My Fiesta st (20th Jan, update lots of little mods)
just a qucik pic of the st before it got dark
spec so far
grills sparyed gloss black
headlights sprayed satin black
focus rs splitter
milltek manifold
milltek decat
milteck cat back
k&n 57i
60mm throttle body
viber technics torque link
gaz gold coilovers
24mm whiteline rear anti roll bar
8x17 compomotive mo's
205/40/17 yoko parada spec 2
spec so far
grills sparyed gloss black
headlights sprayed satin black
focus rs splitter
milltek manifold
milltek decat
milteck cat back
k&n 57i
60mm throttle body
viber technics torque link
gaz gold coilovers
24mm whiteline rear anti roll bar
8x17 compomotive mo's
205/40/17 yoko parada spec 2
17" Team Dynamics Pro Race 1.2 , 57I K&N , GGR Cat Back
- donk1
- Senior Poster
- Posts: 480
- Joined: Wed Dec 05, 2007 10:04 pm
- Location: Ashford,kent
Re: My Fiesta st (20th Jan, update lots of little mods)
Looking very nice on those wheels!
Did the throttle body make any difference?
Did the throttle body make any difference?
- Smo
- Elite Post Master
- Posts: 8658
- Joined: Sun Dec 29, 2002 12:33 am
- Location: My indecisive mind, in Thanet, Kent.
Car: 1990 Ford Fiesta Popular Plus
Re: My Fiesta st (20th Jan, update lots of little mods)
very very nice mate, get some more pics up!
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
80 posts • Page 3 of 3 • 1, 2, 3
Twitter
The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R
17:44, 4th December 2021 Twitter Web App
To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP
17:42, 4th December 2021 Twitter Web App
Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/
Facebook
New article! fiestaturbo.com is 20 years old this year and I'm writing a series delving into the history of it. …
Saturday, 4th December 2021 12:49
Some awesome Escorts from the Fair - FORD FAIR 2021: ESCORT EXHIBITION - …
Sunday, 31st October 2021 17:05
All the best Focuses from Ford Fair - FORD FAIR 2021: FOCUS PEEKING - Which was your …
Thursday, 7th October 2021 22:21
Become a fan:
http://www.facebook.com/fiestaturbo/
RSS Feeds
Subscribe to the RSS feed
What is RSS?
RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.
To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.