NEW project runaround xr2i 2.0 engine in 16/2
31 posts • Page 1 of 1
NEW project runaround xr2i 2.0 engine in 16/2
picked up this mk3 xr2i 16v on wednesday night . RED OBVIOUSLY . me n the misus whent halfs on it paid 600 for it non runna !!
quick spec
2 months mot
new roose hoses
brand new rs acessery wheels (came in ford boxes)
recaro intierior in good nick
84,000 miles
4 new tyres
euro spec rear lights
morrets
converted to 130 spec HO inlet rs1800 ecu ect 2.0 cams
new iridium plugs
new leads
RS TURBO opening rear quarters
show cage
lowered 60mm
sony head unit and alpine speakers
colour codded mk3.5 mirrors
stainless zaust
problem is suspected oil pump seize
picking a 2.0 mondy silvertop up in the morning so should be up n running soon
body is very clean and strait few small marks here n there . alot of stone chips in front bumper
plans are to get an rs rear spoiler and maybe an rs bonnet
some better suspension as its a bit soft
heres some pics
spent ages cleaning it n changing some bits awful gear gator n gear nob and some other small bits
thats it for now
start removing the engine later today
quick spec
2 months mot
new roose hoses
brand new rs acessery wheels (came in ford boxes)
recaro intierior in good nick
84,000 miles
4 new tyres
euro spec rear lights
morrets
converted to 130 spec HO inlet rs1800 ecu ect 2.0 cams
new iridium plugs
new leads
RS TURBO opening rear quarters
show cage
lowered 60mm
sony head unit and alpine speakers
colour codded mk3.5 mirrors
stainless zaust
problem is suspected oil pump seize
picking a 2.0 mondy silvertop up in the morning so should be up n running soon
body is very clean and strait few small marks here n there . alot of stone chips in front bumper
plans are to get an rs rear spoiler and maybe an rs bonnet
some better suspension as its a bit soft
heres some pics
spent ages cleaning it n changing some bits awful gear gator n gear nob and some other small bits
thats it for now
start removing the engine later today
Last edited by rs-tom on Thu Feb 17, 2011 12:15 am, edited 2 times in total.
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
that looks really good, love the wheels. i want your morettes
- fezza89
- Elite Post Master
- Posts: 1002
- Joined: Tue Jan 26, 2010 3:59 pm
- Location: dagenham,essex
- Your car: mk3 fiesta rs turbo rep
Re: NEW project runaround xr2i 2.0 04/02
Looks clean mate. Although I would change the side repeaters back to standard and the fuel cap.
LOW LIFE - My Gearbox Cradle is almost touching the Tarmac. Lovely!
- EUFez
- Elite Post Master
- Posts: 2580
- Joined: Mon Sep 01, 2008 11:25 pm
- Location: Windsor, Berkshire
Re: NEW project runaround xr2i 2.0 04/02
Fuel cap will be gOne . Morrets maybe for sale
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
rs-tom :Fuel cap will be gOne . Morrets maybe for sale
i call first dibs on the morrettes if you do decide to sell
- fezza89
- Elite Post Master
- Posts: 1002
- Joined: Tue Jan 26, 2010 3:59 pm
- Location: dagenham,essex
- Your car: mk3 fiesta rs turbo rep
Re: NEW project runaround xr2i 2.0 04/02
that year is ment to have the leather gear gator mate.
looks really good for what you paid for it
looks really good for what you paid for it
- jayrs
- Elite Post Master
- Posts: 31520
- Joined: Mon Apr 19, 2004 10:32 pm
- Location: I.O.W
- Your car: FRST, XR2, ST170, ST225
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
leather gator was foul so replaced it . just dint like it . it is a good en and its strait just need to spend as little cash on it as possible and keep on with the xr2
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
fair enough mate.
hows the xr2 coming on?
hows the xr2 coming on?
- jayrs
- Elite Post Master
- Posts: 31520
- Joined: Mon Apr 19, 2004 10:32 pm
- Location: I.O.W
- Your car: FRST, XR2, ST170, ST225
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
Well it's ready for painting now but I'm bit skint I'd like to have a go at it ma self but it's to good to ruin so
Need to wait abit
Need to wait abit
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
i know what ya mean mate, its too cold too, unless you got somewhere warm and draft free, it will go wrong if you tried it ya self
- jayrs
- Elite Post Master
- Posts: 31520
- Joined: Mon Apr 19, 2004 10:32 pm
- Location: I.O.W
- Your car: FRST, XR2, ST170, ST225
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
i saw this on ebay,looked really nice in the pics and i was tempted.I cant remember it saying it was a none runner.looks smart now its had a clean.those wheels look mint.
- lachojski2005
- Post Master
- Posts: 792
- Joined: Wed Dec 06, 2006 9:42 pm
- Location: Nottingham
Re: NEW project runaround xr2i 2.0 04/02
they r mint mate brand spankers
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
Looks really good mate
Loving the wheels and rear lights too!
Loving the wheels and rear lights too!
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
Re: NEW project runaround xr2i 2.0 04/02
looks really gonice condition too
think the morrettes would be better black, are them wheels 14's? id go for something a bit different imo theyre dont seem to suit it for me
any plans for her apart from the engine?
think the morrettes would be better black, are them wheels 14's? id go for something a bit different imo theyre dont seem to suit it for me
any plans for her apart from the engine?
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: NEW project runaround xr2i 2.0 04/02
jonyb4 :looks really gonice condition too
think the morrettes would be better black, are them wheels 14's? id go for something a bit different imo theyre dont seem to suit it for me
any plans for her apart from the engine?
rs rear spoiler and maybe an rs bonnet . dont wanna spend to much on it really take it for mot and some stiffer suspension
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
That looks a cracking buy for the money, can't argue at £600 for sure!!
The morrettes arn't for me, would look much better with standard headlights imo BUT.... otherwise, top job!
The morrettes arn't for me, would look much better with standard headlights imo BUT.... otherwise, top job!
- rst-steve
- Senior Poster
- Posts: 251
- Joined: Wed Jul 07, 2010 7:10 pm
- Location: Norfolk
- Your car: 1990 Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 04/02
Never seen those wheels before, they usually have a lip!
- Max M4X WW
- Elite Post Master
- Posts: 18161
- Joined: Sun Jun 22, 2003 9:52 pm
- Location: Hampshire
- Your car: Merc CL500
Car: 2014 BMW M135i
Re: NEW project runaround xr2i 2.0 04/02
small update
right i picked up the 2.0 engine on saturday the gammon slipper i brought it off forgot to tell me he mangled the oil pump to oil filter flange removing it from the car so had to buy new oil pump for it wich means new sump gasket, new crank seal ect ect
anyway few pics
workshop is abit rammed but im not complaining
received this today from clarke . top purchase
thats it for now. engine is in just need to finish plumin
right i picked up the 2.0 engine on saturday the gammon slipper i brought it off forgot to tell me he mangled the oil pump to oil filter flange removing it from the car so had to buy new oil pump for it wich means new sump gasket, new crank seal ect ect
anyway few pics
workshop is abit rammed but im not complaining
received this today from clarke . top purchase
thats it for now. engine is in just need to finish plumin
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 small update
nice mate.
bummer about the pump though, although its not a nightmare to do really, sump would need changing on the 2 litre anyway (unless its been done already) and it woyld be best to fit a new belt to it too.
you need to clean that workshop mate , and i hope you dont leave the boot open on the mk2 like that, i left the boot open on my mk2 for best part of 18 months, came to shut it when moving it out and one hinge was rotted through and just stayed there while the boot folded round it
bummer about the pump though, although its not a nightmare to do really, sump would need changing on the 2 litre anyway (unless its been done already) and it woyld be best to fit a new belt to it too.
you need to clean that workshop mate , and i hope you dont leave the boot open on the mk2 like that, i left the boot open on my mk2 for best part of 18 months, came to shut it when moving it out and one hinge was rotted through and just stayed there while the boot folded round it
- jayrs
- Elite Post Master
- Posts: 31520
- Joined: Mon Apr 19, 2004 10:32 pm
- Location: I.O.W
- Your car: FRST, XR2, ST170, ST225
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 small update
bloody hell lol its shut now anyway
yeah im to fussed bout the pump least i know the pumps good now . changed water pump belt and tensioners to so all good
yeah im to fussed bout the pump least i know the pumps good now . changed water pump belt and tensioners to so all good
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 small update
tbh the hinge was a bit manky to start with i think but still soild, well was i got a brand new gen ford boot lid for the xr2 anyway (as well as 2 s/h ones) so im not worried.
i'll keep it though, going on rusted panels at ford fair its gotta be worth £300
thats it mate, you know the pump is spot on now so its a worry your never have.
i still havent put the belt kit on the zetec engine for my xr2, so although ive put a 1.6 water pump on it, i might just change it for a brand new one, and maybe pop a new oil pump on it, if i can get one at a good price
i'll keep it though, going on rusted panels at ford fair its gotta be worth £300
thats it mate, you know the pump is spot on now so its a worry your never have.
i still havent put the belt kit on the zetec engine for my xr2, so although ive put a 1.6 water pump on it, i might just change it for a brand new one, and maybe pop a new oil pump on it, if i can get one at a good price
- jayrs
- Elite Post Master
- Posts: 31520
- Joined: Mon Apr 19, 2004 10:32 pm
- Location: I.O.W
- Your car: FRST, XR2, ST170, ST225
Car: 1991 Ford Fiesta RS Turbo
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 engine in 16/2
The FRST spoiler makes such a difference
How come you didn't go for a 1.6/1.8 Fiesta/Escort oil pump, so that you could run the larger standard oil filter? Apologies if you did, just looks like a Mondeo one from the photo though!
How come you didn't go for a 1.6/1.8 Fiesta/Escort oil pump, so that you could run the larger standard oil filter? Apologies if you did, just looks like a Mondeo one from the photo though!
- Smo
- Elite Post Master
- Posts: 8658
- Joined: Sun Dec 29, 2002 12:33 am
- Location: My indecisive mind, in Thanet, Kent.
Car: 1990 Ford Fiesta Popular Plus
Re: NEW project runaround xr2i 2.0 engine in 16/2
And out of interest, how much did the oil pump cost you?
- Smo
- Elite Post Master
- Posts: 8658
- Joined: Sun Dec 29, 2002 12:33 am
- Location: My indecisive mind, in Thanet, Kent.
Car: 1990 Ford Fiesta Popular Plus
Re: NEW project runaround xr2i 2.0 engine in 16/2
na it is a mondeo one mate it was just the first one i came to n cheapest so i brought it . im runnin cvh filter on my xr2 also so just easyier for me when it comes to servicing lol just buy 2 of everything
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 engine in 16/2
70 quid posted brand new from e bay. was the cheapest about mate
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
- Smo
- Elite Post Master
- Posts: 8658
- Joined: Sun Dec 29, 2002 12:33 am
- Location: My indecisive mind, in Thanet, Kent.
Car: 1990 Ford Fiesta Popular Plus
Re: NEW project runaround xr2i 2.0 engine in 16/2
local motor factor quoted £97 plus vat
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 engine in 16/2
ouch, i figured they'd be similar priced to a water pump somehow
loooking stunning mate, love the bay, and loving the ST3 is it? i know the indicator mirrors were only fitted to the high spec ones
bet you borrow that now and then
loooking stunning mate, love the bay, and loving the ST3 is it? i know the indicator mirrors were only fitted to the high spec ones
bet you borrow that now and then
1800 Zetec 133bhp 140lbs/ft
mk2 pop 1.4i
- jonyb4
- Elite Post Master
- Posts: 9235
- Joined: Tue Aug 12, 2008 12:05 am
- Location: Port Talbot, South Wales
- Your car: Si 1.8, mk2 950, 2.0 capri
Car: 1995 Ford Fiesta Si 16v
Re: NEW project runaround xr2i 2.0 engine in 16/2
jonyb4 :ouch, i figured they'd be similar priced to a water pump somehow
loooking stunning mate, love the bay, and loving the ST3 is it? i know the indicator mirrors were only fitted to the high spec ones
bet you borrow that now and then
i borrow it most days lol its a dream to drive st s never did owet for me till i drove this . its a supperb machine
- rs-tom
- Elite Post Master
- Posts: 1766
- Joined: Wed May 03, 2006 9:08 pm
- Location: derby
Car: 1991 Ford Fiesta RS Turbo
Re: NEW project runaround xr2i 2.0 engine in 16/2
Nice work mate, love the focus too!
- Dave G fsi
- Elite Post Master
- Posts: 2918
- Joined: Mon Feb 16, 2009 11:35 pm
- Location: Sheffield
- Your car: Mk1 FRS and FRST
31 posts • Page 1 of 1
Twitter
The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R
17:44, 4th December 2021 Twitter Web App
To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP
17:42, 4th December 2021 Twitter Web App
Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/
Facebook
New article! fiestaturbo.com is 20 years old this year and I'm writing a series delving into the history of it. …
Saturday, 4th December 2021 12:49
Some awesome Escorts from the Fair - FORD FAIR 2021: ESCORT EXHIBITION - …
Sunday, 31st October 2021 17:05
All the best Focuses from Ford Fair - FORD FAIR 2021: FOCUS PEEKING - Which was your …
Thursday, 7th October 2021 22:21
Become a fan:
http://www.facebook.com/fiestaturbo/
RSS Feeds
Subscribe to the RSS feed
What is RSS?
RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.
To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.