fiestaturbo.com

[Tom SX]

after a performance cam for my 2i, looking at the kent ones on fiesta centre.

cvh22k (full kit inc spings,followers and cam)

Most popular Fiesta/Escort cam ever. 12-14 bhp improvement with no fitting complications. Excellent standing start acceleration. Will work very well with our Ashley competition exhaust systems. Power Band 2000>6500 rpm. Valve Lift .437" inlet / exh. Duration 274 inlet / exh

£185.00 not inc vat



cvh32k (full kit inc spings,followers and cam)

The ultimate in simple fit injection cams. Excellent tick over with great mid-range acceleration. 10 bhp increase over standard cam. Power Band 1000>6500 rpm. Valve Lift .448" inlet / exh. Duration 280 inlet/273 exh

£181.25 not inc vat

What does everyone recommend cam wise. I'm after a full kit like these Kent ones. Know that pipercross are another manufacturer.

I'm after a mild cam as its a day to day car, so these are the sort i'm looking at, obv u only get about half the power they quote but anything is a good start.

BUT WHAT DO I GO FOR?

[JamieFRST]

I think i'd go for the cvh22 if i was gonna get one

[Tom SX]

thats the idea so far but at the beggining of my research, don't want to sped £200 and find out i should of bought something else :O

i've always heard the kent ones were good for ford and AFAIK the puma racing site says the 22 is probably best for road use.

any other thoughts?

[Nick 2i]

hi, whats the url of the site u got that off??

Cheers

[Tom SX]

its http://www.fiesta-centre.co.uk

price quoted without VAT so look out. a mate told me there wouldn' be that much difference in prices even if i did shop about but advised me to get the right cam!

[snake]

wot other mods u done to the car? wot u got planned for it?

[Tom SX]

cars being built atm.

pipercross induction kit.
standard exhaust and manifold for the time being (i.e. for about 3 months till i can afford a full mongoose/scorpion/magnex manifold back system.

want to go some way into the tuning but not big valve heads and such malarky.

[Nick 2i]

cheers nice one,


i was thinknig of getting the cams done on my 16v 2i, though its done 86k.


is it gonna be worth getting them done???

[chumkila]

as long as its been serviced and runs well why not.

[Nick 2i]

yeah it runs well, starts first time every time

yeah its servied regularly its getting serviced tomorrow


it says on that site that i can see around 20 bhp...sounds a bit optimistic to me, but if i do

[chumkila]

it'll be a right nippy one!

[Nick 2i]

yeah i hope so!

[snake]

lol, you`ll get 5-8bhp from a cam and you`ll need a vernier to dial it in right, i`ll post later what cam i think u should get, but i think the 22k is aimed at carbed engines... might get more if u add better zorst/manifold etc but this is llike knock on effect as zorst will add more anyway, but normally get 5-8 bhp from cam alone.

cvh cams are pretty much tossed by 60000k, they last from 40-60k

[xr2i 1649]

Y dont u get a cam made 4 u then u can get just wot u wont
think it cost about £45 2 get ur old cam dun
and if u do not like it then take it back and get them 2 do it a gain
(i had a blank cam made up)
but they can do it 2 ur old cam
that wot the race boy's do and it work's 4 me.
if u wont some 2 do the work 4 u look in C.C.C

(but thas wot i think)
soz 4 the selling i am p.d

[Tom SX]

lol happy to see 13 replies but then a convo between chum and nick. lol.

the 22 based for carbs, would you recomend getting the 32 then shnaakey

as for getting your own one ground up, sounds cheap as chips but surely you need a standard £150 ford one to start on first

[Mark Si]

sounds cheap as chips

I notice a bit of David Dickinson springing up here

[Tom SX]

Y dont u get a cam made 4 u then u can get just wot u wont
think it cost about £45 2 get ur old cam dun
and if u do not like it then take it back and get them 2 do it a gain
(i had a blank cam made up)
but they can do it 2 ur old cam
that wot the race boy's do and it work's 4 me.
if u wont some 2 do the work 4 u look in C.C.C

(but thas wot i think)
soz 4 the selling i am p.d

mate an interesting new light on things, get back to me when your sober!

[Nick 2i]

yeah sorry tomsx about hijacking your post!

it just got me thinking about getting the cams done on my 2i

[xr2i 1649]

soz m8 but if i am not at work
or in my car i am P.D
but if u wont some help
specialised engines can help u i think
tell:01375 3786069
or look on http://www.specialisedengines.co.uk
if not then get the mag C.C.C as they do lot's of thing 4 the race boy
and do not rep u of as much

(but thats wot i think)