fiestaturbo.com

[jayrs]

cant wait to see it finished mate

[Fraggle]

Cracking..no mini Skirts allowed in that one

[FRSJON]

:bonkers: Cracking..no mini Skirts allowed in that one

mini skirts are always welcome (girls only )

[emblem]

Awesome as always, Would not expect anything less...........

Cant wait to see it in the flesh..............

[rs-tom]

how are ur rear windows fitted mate u got any close up pics

[FRSJON]

one of the last pics showing the seats show you best,there bolted in..m5 stainless button head bolts..bonded as well to stop leaks and vibration

[rs-tom]

thanks mate

[rs-tom]

sorry for being a pain mate . how did u get the thick black line round the window

[FRSJON]

sorry for being a pain mate . how did u get the thick black line round the window

they were made that way,came out of luca's car

[Excursion]

Nicely prepared, Jon. It's nice to see one being done well.

[FRSJON]

Nicely prepared, Jon. It's nice to see one being done well.

cheers mate means alot coming from you so am i going to have a nighmare with these mg calipers

[Excursion]

so am i going to have a nighmare with these mg calipers

I decided that the best way would be to remove the caliper lugs and bolt through the flat, angled section near where the lugs are/were, then have an alloy bracket made to bolt to the existing Fiesta holes. Does that make sense?

I will have some brackets made up soon so will get a few pairs done.

[Dave G fsi]

Its all coming together nicely now Jon, keep up the good work

[jayrs]

forgot to say today jon, if you want me to make some brackets up for that intercooler, let me know and i'll what alloy i got

[FRSJON]

so am i going to have a nighmare with these mg calipers

I decided that the best way would be to remove the caliper lugs and bolt through the flat, angled section near where the lugs are/were, then have an alloy bracket made to bolt to the existing Fiesta holes. Does that make sense?

I will have some brackets made up soon so will get a few pairs done.

sounds good and put me doen for a pair please

[FRSJON]

forgot to say today jon, if you want me to make some brackets up for that intercooler, let me know and i'll what alloy i got

yeah cheers jay i have some alloy here just needs bending

[Fraggle]

:bonkers: Cracking..no mini Skirts allowed in that one

mini skirts are always welcome (girls only )

No passenger ride for me then

[jayrs]

forgot to say today jon, if you want me to make some brackets up for that intercooler, let me know and i'll what alloy i got

yeah cheers jay i have some alloy here just needs bending

no worries mate, i got the folder out the workshop.
how thick is it? if its too thick it wont do it as its only a small one.
pm me about it, or were chat on msn mate, if you got msn sorted yet

[FRSJON]

3mm i think jay..no msn for me its been hacked to bits,no contacts or nothing left what i have is about 100mm wide x 300mm and i need a 50mm 90 degree bend on the 100mm end...x2 of these

[jayrs]

thats fine mate, should bend that

hope it not hard grade alloy though, that stuff cracks when bent

what time you off to work in morning? if you can pop it through my letter box in the morning i'll take it out to the workshop tomorrow and bend it up for ya mate

[FRSJON]

thats fine mate, should bend that

hope it not hard grade alloy though, that stuff cracks when bent

what time you off to work in morning? if you can pop it through my letter box in the morning i'll take it out to the workshop tomorrow and bend it up for ya mate

cheers jay,tell ya what ill come down somewhen tomorrow evening with it if ok? no rush for it as i have to get some welded on the cooler

[jayrs]

texted ya mate

[FRSJON]

todays efforts

[Rhinopower]

Harnesses look good but they need to cross over eachother and separate them with approx 6" of rollcage padding, much safer!

[FRSJON]

also the AP calipers are in the machine shop tomorrow will have them back wednesday. paint and APracing stickers here waiting

[curly]

wwith them bumper moounts, i dont supose u got a picture of the actual bumpers cut outs for the mounts to sit inside,, so i can get an idea how the mounts fit,, cheers,,

and am i right in guessing i baught my mani /t3 fitting off you,, if so, thanks very muchly

[FRSJON]

the bumper just has all the foam removed.. the mounts bolted to the car are made to suit the bumper so nothing else is done .the top flat of the bumper sits on top of the mount and the bolt goes through were the green strip would be .. not sure on you buying anything off me but no probs any way

[- Danny Boy -]

Looks awesome Jon!

[curly]

cheers,, erm your welcome lol,, i was contemplating using the same technique, but use the montings behind the fogs, so its hidden, and still able to use the bumper lights allso,, then can quick release a few bumpers and chop and change as i feel

looking at this
you can hardly notice the bolt anyway,, and if i cut /drilled a recess big enough could possibly have the bolt embedded in to the strip

thankyou,, for the good pictures lol

[Fraggle]

Beeeeeeeeeeeaaaaaaaaaasssssssssssssstttttttttt...

[emblem]

Once again top work Jon.

Car looks more and more mental everytime i see it.

Cheers Craig

[rs-tom]

awsome looking car love the stripes n carbon


u could get some carbon fiber sheet and cut it to fit the wing mirror recess,s would look tidy

[FRSJON]

awsome looking car love the stripes n carbon


u could get some carbon fiber sheet and cut it to fit the wing mirror recess,s would look tidy

will be mate once i see some for the right price hoping performance trim will be at a few shows this year selling off-cuts.need some to fill up all the heater vents in the dash as well

[FRSJON]

more done this weekend...

AP 4 pots on..



cvh thermostat on...


tow out mount made and test fitted...




i had this made as the original tow eye had to be removed as the intercooler was in the way..this has been made so that a tow eye strap can be fitted and hang down the front bumper nicely





also fitted the bulkhead fittings for the fuel lines..



the rain stopped us getting the casr out today but still loads being done..

[RS rob]

fantastic progress here mate,
very jealous!!!