RS1800 "project trumpets" update with pics 9/4/11
119 posts • Page 4 of 4 • 1, 2, 3, 4
Re: RS1800 "project trumpets" update with pics 9/4/11
Hello strangers. Long time since ive been on here.
To begin with the good news, yes, I still have the car. Bad news is nothing more has changed to it.
Have moved house again, got a new roll at work meaning I travel further, in turn meaning less time.
And I have now got a broken collar bone from snowboarding.
On the plus side, means more tinker time finally with the RS.
I have only really seen it when we moved as so much going on. Couldn't vring myself to sell it so stashed it away.
Now tho, with a month or even two of bieng signed off, I shall hopefully see some enthusiasm to start the project again.
Just from mooching on here I am getting a little spark going for it again
Hopefully I will be producing some results In the not too distant future.
To begin with the good news, yes, I still have the car. Bad news is nothing more has changed to it.
Have moved house again, got a new roll at work meaning I travel further, in turn meaning less time.
And I have now got a broken collar bone from snowboarding.
On the plus side, means more tinker time finally with the RS.
I have only really seen it when we moved as so much going on. Couldn't vring myself to sell it so stashed it away.
Now tho, with a month or even two of bieng signed off, I shall hopefully see some enthusiasm to start the project again.
Just from mooching on here I am getting a little spark going for it again
Hopefully I will be producing some results In the not too distant future.
rebuilding new rs1800 engine with omex and jenvy throttle bodies. bring on the trumpets!!
- rs1800dom
- Poster
- Posts: 198
- Joined: Fri Jan 25, 2008 9:59 pm
- Location: tadley, nr reading
- Your car: Mondeo ST tdci Estate/RS1800
Re: RS1800 "project trumpets" update with pics 9/4/11
wooo! bring on the trumpets, is it going to be ready for the ford day at Beaulieu?
take it easy Pal
take it easy Pal
- rsonblackwheels
- Post Master
- Posts: 787
- Joined: Tue Nov 13, 2007 10:16 am
- Location: near basingstoke hampshire
Re: RS1800 "project trumpets" update with pics 9/4/11
Ok people, its do or die time with this project. Atm I am torn between keeping it and sinking a bit of money into it to get it closer to running/actually start the blooming thing lol.
Or, strip it for bits, and make as mich as I can and either start a new project, or jack the whole lot in. With an impeding baby due the day before my birthday (19th October for anyone who wants to get me something lol) I have to make my mind up.
I have a clear weekend at this point in time, and will hopefully drag it out the garage to assess the damage for parts needed. Will be taking some pics so at least every one can see it still exists.
What are peoples opinions on my situation.
Obviously its my final decision, but wanna hear your views on it.
Or, strip it for bits, and make as mich as I can and either start a new project, or jack the whole lot in. With an impeding baby due the day before my birthday (19th October for anyone who wants to get me something lol) I have to make my mind up.
I have a clear weekend at this point in time, and will hopefully drag it out the garage to assess the damage for parts needed. Will be taking some pics so at least every one can see it still exists.
What are peoples opinions on my situation.
Obviously its my final decision, but wanna hear your views on it.
rebuilding new rs1800 engine with omex and jenvy throttle bodies. bring on the trumpets!!
- rs1800dom
- Poster
- Posts: 198
- Joined: Fri Jan 25, 2008 9:59 pm
- Location: tadley, nr reading
- Your car: Mondeo ST tdci Estate/RS1800
Re: RS1800 "project trumpets" update with pics 9/4/11
If you do break bud, I may well be interested in the rolling shell.
It would a shame to see it broken though seeing how close you are to finishing it.
It would a shame to see it broken though seeing how close you are to finishing it.
- Turboboy67
- Elite Post Master
- Posts: 5605
- Joined: Thu Aug 24, 2006 8:39 pm
- Location: Shaftesbury, Dorset
- Your car: 911GT3 RS
Re: RS1800 "project trumpets" update with pics 9/4/11
Don't brake it, you will always regret it after
- rsonblackwheels
- Post Master
- Posts: 787
- Joined: Tue Nov 13, 2007 10:16 am
- Location: near basingstoke hampshire
Re: RS1800 "project trumpets" update with pics 9/4/11
After much deliberation, I have decided to keep the rs.
After chatting to ash aka rsonblackwheels and meeting the guys and girls who went to castle coombe again.
And especially after I saw how good they look on track
So as I have a few busy weekends ahead including rs national day and Ford fair
But will hopefully have a big push for a fire up during August, as I mentioned before, with the impending arrival of my first born in October, I really need to get this done before then. Will update once progress isstarted again, but might be a week or two.
After chatting to ash aka rsonblackwheels and meeting the guys and girls who went to castle coombe again.
And especially after I saw how good they look on track
So as I have a few busy weekends ahead including rs national day and Ford fair
But will hopefully have a big push for a fire up during August, as I mentioned before, with the impending arrival of my first born in October, I really need to get this done before then. Will update once progress isstarted again, but might be a week or two.
rebuilding new rs1800 engine with omex and jenvy throttle bodies. bring on the trumpets!!
- rs1800dom
- Poster
- Posts: 198
- Joined: Fri Jan 25, 2008 9:59 pm
- Location: tadley, nr reading
- Your car: Mondeo ST tdci Estate/RS1800
Re: RS1800 "project trumpets" update with pics 9/4/11
Good move, can't wait to get back on it
- rsonblackwheels
- Post Master
- Posts: 787
- Joined: Tue Nov 13, 2007 10:16 am
- Location: near basingstoke hampshire
Re: RS1800 "project trumpets" update with pics 9/4/11
Good lad, looking forward to seeing it on the road
- Tweek
- Elite Post Master
- Posts: 9240
- Joined: Sun Jul 17, 2005 1:22 am
- Location: Gloucester
- Your car: VW Golf GTD
Car: 1996 Ford Fiesta Zetec Turbo
Re: RS1800 "project trumpets" update with pics 9/4/11
Well after collecting the alternator and parts from George at ford fair, I left early to crack on with it.
So last night I managed to bolt the exhaust manifold on, fit the alternator, aux belt, pully, starter motor and wiring loom.
So all in all a productive evening.
Next issue is how to remove the throttle cable from the car. I uave disconnected it from both ends, but can't get it out from the bulk head. Any help welcome.
At this rate, I may start it this month. Fingers crossed
So last night I managed to bolt the exhaust manifold on, fit the alternator, aux belt, pully, starter motor and wiring loom.
So all in all a productive evening.
Next issue is how to remove the throttle cable from the car. I uave disconnected it from both ends, but can't get it out from the bulk head. Any help welcome.
At this rate, I may start it this month. Fingers crossed
rebuilding new rs1800 engine with omex and jenvy throttle bodies. bring on the trumpets!!
- rs1800dom
- Poster
- Posts: 198
- Joined: Fri Jan 25, 2008 9:59 pm
- Location: tadley, nr reading
- Your car: Mondeo ST tdci Estate/RS1800
Re: RS1800 "project trumpets" update with pics 9/4/11
Glad this is progressing again now. I can't remember the specifics on the throttle cable but I remember it being a right pain to do, and that was without the engine in!
- Tweek
- Elite Post Master
- Posts: 9240
- Joined: Sun Jul 17, 2005 1:22 am
- Location: Gloucester
- Your car: VW Golf GTD
Car: 1996 Ford Fiesta Zetec Turbo
Re: RS1800 "project trumpets" update with pics 9/4/11
Well doesn't matter now lol, decided the supplied cable wouldn't work with the accelerator pedal, so cut the original one down and fitted that instead. Still gotta solder the little hammer on tho
Slowly getting there.
Also, work started on my drive today, and should be completed in about three weeks, and my ideal aim is for the rs to be the first car to drive on it
So got my work cut out, but giving myself this deadline so to speak, has given me the enthusiasm I so desperately needed.
Slowly getting there.
Also, work started on my drive today, and should be completed in about three weeks, and my ideal aim is for the rs to be the first car to drive on it
So got my work cut out, but giving myself this deadline so to speak, has given me the enthusiasm I so desperately needed.
rebuilding new rs1800 engine with omex and jenvy throttle bodies. bring on the trumpets!!
- rs1800dom
- Poster
- Posts: 198
- Joined: Fri Jan 25, 2008 9:59 pm
- Location: tadley, nr reading
- Your car: Mondeo ST tdci Estate/RS1800
Re: RS1800 "project trumpets" update with pics 9/4/11
Hello strangers. Yet again it has been far too long since i worked on the rs.
Since having rhe drive finished, I haven't touched the rs and its still in the garage complex across the road and around the corner from me.
Well not for much longer. Pumped 3 tyres up (as one still had air after all this time)
Found some tarpooling, so when either rsonblackwheels (aka ash) or his old man get home, operation 'rs in sight' is a go.
Got permission to have the car on the drive.
This helps three fold.
1. I see it every day and get more enthusiasm (plus electric and lights)
2. I have to park the st across the road and will get fed up with doing it so more enthusiasm to finish rs
3. The wife will nag more often when it goes a few days without any progress on it
Not sure how long it will be. But sooo hoping to fire it up this year, with nipper my time is short so no promises
Since having rhe drive finished, I haven't touched the rs and its still in the garage complex across the road and around the corner from me.
Well not for much longer. Pumped 3 tyres up (as one still had air after all this time)
Found some tarpooling, so when either rsonblackwheels (aka ash) or his old man get home, operation 'rs in sight' is a go.
Got permission to have the car on the drive.
This helps three fold.
1. I see it every day and get more enthusiasm (plus electric and lights)
2. I have to park the st across the road and will get fed up with doing it so more enthusiasm to finish rs
3. The wife will nag more often when it goes a few days without any progress on it
Not sure how long it will be. But sooo hoping to fire it up this year, with nipper my time is short so no promises
rebuilding new rs1800 engine with omex and jenvy throttle bodies. bring on the trumpets!!
- rs1800dom
- Poster
- Posts: 198
- Joined: Fri Jan 25, 2008 9:59 pm
- Location: tadley, nr reading
- Your car: Mondeo ST tdci Estate/RS1800
Re: RS1800 "project trumpets" update with pics 9/4/11
I'm looking forward to seeing this bud., I'm glad you've found some motivation to carry on with it.
- Turboboy67
- Elite Post Master
- Posts: 5605
- Joined: Thu Aug 24, 2006 8:39 pm
- Location: Shaftesbury, Dorset
- Your car: 911GT3 RS
Re: RS1800 "project trumpets" update with pics 9/4/11
Updates happening today with pics to show i still have it and remind people what it looks like.
got about an hour or 2 free this morning, so will start in about an hour.
Probably just take pictures and look at it lol
got about an hour or 2 free this morning, so will start in about an hour.
Probably just take pictures and look at it lol
rebuilding new rs1800 engine with omex and jenvy throttle bodies. bring on the trumpets!!
- rs1800dom
- Poster
- Posts: 198
- Joined: Fri Jan 25, 2008 9:59 pm
- Location: tadley, nr reading
- Your car: Mondeo ST tdci Estate/RS1800
119 posts • Page 4 of 4 • 1, 2, 3, 4
Twitter
The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R
17:44, 4th December 2021 Twitter Web App
To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP
17:42, 4th December 2021 Twitter Web App
Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/
Facebook
New article! fiestaturbo.com is 20 years old this year and I'm writing a series delving into the history of it. …
Saturday, 4th December 2021 12:49
Some awesome Escorts from the Fair - FORD FAIR 2021: ESCORT EXHIBITION - …
Sunday, 31st October 2021 17:05
All the best Focuses from Ford Fair - FORD FAIR 2021: FOCUS PEEKING - Which was your …
Thursday, 7th October 2021 22:21
Become a fan:
http://www.facebook.com/fiestaturbo/
RSS Feeds
Subscribe to the RSS feed
What is RSS?
RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.
To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.