TD Van..ITS fudgekin DEAD AND BURRIED!!!! *19/10*
TD Van..ITS fudgekin DEAD AND BURRIED!!!! *19/10*
anywho..........those that participated in this thread will be very pleased to know that it is now in my thankless hands
As a 1.8 diesel at first glance the car looks pap..................and that it does. But there are some very good points, such as the badboy bonnet has been done well, there is a small crack in the filler, but is fixable. The smooth door seems to have been done well, and is very level, and the boot is questionable as it has started to crack.
but the bodywork is in very good condition, better then mine is.
now i need new suspension and Im going to probably grab a new exhust, bonnet, side skirts and tailgate, also probably new wheels.
oh and the interior is absolutely shoddy!!!! Look at those door cards!!!
anyway the seats are going as well..............so take a look and see what you think ....................not bad for 200 notes i think.............
As a 1.8 diesel at first glance the car looks pap..................and that it does. But there are some very good points, such as the badboy bonnet has been done well, there is a small crack in the filler, but is fixable. The smooth door seems to have been done well, and is very level, and the boot is questionable as it has started to crack.
but the bodywork is in very good condition, better then mine is.
now i need new suspension and Im going to probably grab a new exhust, bonnet, side skirts and tailgate, also probably new wheels.
oh and the interior is absolutely shoddy!!!! Look at those door cards!!!
anyway the seats are going as well..............so take a look and see what you think ....................not bad for 200 notes i think.............
Last edited by Ghost on Fri Oct 19, 2007 6:45 pm, edited 26 times in total.
- Ghost
- Elite Post Master
- Posts: 7199
- Joined: Sun Feb 15, 2004 10:11 pm
- Kartracer69
- Elite Post Master
- Posts: 3344
- Joined: Mon Jul 05, 2004 3:34 pm
- Location: Herts Drives: Fiesta VTS Abuses: Zip Rotax 125cc
- MAD_Adamski
- Elite Post Master
- Posts: 4475
- Joined: Thu Sep 19, 2002 6:28 pm
- Location: birmingham/shropshire Drives:Fiesta RS, Escort cosworth
Whats happening to your other one?
How come the inlet piece on the diesel engines, is always clean and shiny black?
Looks nice, bit chive though, need another interior, pm ant pittaway off here, he is breaking a RS1800/16v2i and it had what looked a very good winged interior in it when i was down there the other day
How come the inlet piece on the diesel engines, is always clean and shiny black?
Looks nice, bit chive though, need another interior, pm ant pittaway off here, he is breaking a RS1800/16v2i and it had what looked a very good winged interior in it when i was down there the other day
- mk3.5finesse
- Senior Poster
- Posts: 245
- Joined: Sat Oct 15, 2005 9:13 pm
u got it for 200 quid.......just re read the post!
and your getting rid of seats......hmm how much you want
and your getting rid of seats......hmm how much you want
- Kartracer69
- Elite Post Master
- Posts: 3344
- Joined: Mon Jul 05, 2004 3:34 pm
- Location: Herts Drives: Fiesta VTS Abuses: Zip Rotax 125cc
worth a nice penny in parts
but i want to keep it so im gonna have to put money into it aswell
needs tax and MOT, but i cant seeing MOT being a problem apart from the possibility of emissions
im off to PM Nomad for a price on a nice set of parts
but i want to keep it so im gonna have to put money into it aswell
needs tax and MOT, but i cant seeing MOT being a problem apart from the possibility of emissions
im off to PM Nomad for a price on a nice set of parts
- Ghost
- Elite Post Master
- Posts: 7199
- Joined: Sun Feb 15, 2004 10:11 pm
2nd dibs on seats if you sell
2.1 Zetec Turbo ERST S2. T34 Hybrid Turbo. Tubular PVE Manifold. Rover Inlet. Stage 2 CTS Box. 3" - 4" Mongoose. Stripped out. Corbeau Revolution Seats.
6 Point Safety Devices Cage.
- purple_fiesta
- Elite Post Master
- Posts: 3328
- Joined: Tue Aug 10, 2004 11:23 pm
- Location: Redcar
Thats that one from ebay, You keeping it or raping it of its bits?
Surley the badboy hasnt been done well at all if its cracked
Surley the badboy hasnt been done well at all if its cracked
- Max M4X WW
- Elite Post Master
- Posts: 18161
- Joined: Sun Jun 22, 2003 9:52 pm
- Location: Hampshire
- Your car: Merc CL500
Car: 2014 BMW M135i
purple_fiesta :2nd dibs on seats if you sell
everyone wants these seats!...........i cant stand them, whats everybodies fasination (gonna be looking for around £100 for them, or a swap for recaro front seats and doorcards, including trim)
the badboy isnt too bad, im going to be getting more pics today so we can all see the problems!
but i am going to keep it do it up a little, and run it as my second car
- Ghost
- Elite Post Master
- Posts: 7199
- Joined: Sun Feb 15, 2004 10:11 pm
- chris-fiesta
- Elite Post Master
- Posts: 3422
- Joined: Tue Jun 22, 2004 11:58 am
- Location: croydon, london Drives: 2.0 16v mk3
Max M4X WW :Surley the badboy hasnt been done well at all if its cracked
its ok he gonna fix it and stick it on his other car...i did tell him he didnt need to buy a whole car just to get hold of a badboy bonnet though
- Superal
- Elite Post Master
- Posts: 7206
- Joined: Tue Aug 19, 2003 11:07 am
- Location: Waltham Abbey, Essex Drives: Peugeot 206 Work Van
Superal :Max M4X WW :Surley the badboy hasnt been done well at all if its cracked
its ok he gonna fix it and stick it on his other car...i did tell him he didnt need to buy a whole car just to get hold of a badboy bonnet though
shut up you tit
- Ghost
- Elite Post Master
- Posts: 7199
- Joined: Sun Feb 15, 2004 10:11 pm
yeah, i saw this on ebay too. thought it looked crap, but i suppose it's better than a standard looking diesel
< Pete >< Peugeot 306 1.9 DTurbo >< 118bhp 155 lb/ft >< FOR SALE £1000 >
- musicdrummer42
- Elite Post Master
- Posts: 1556
- Joined: Wed Oct 20, 2004 2:26 pm
- Location: Scarborough/Huddersfield uni
Right, little update, havent done alot in the ways of getting it on the road. Need a bit of cash, but that should be comming from my christmas job and the job thereafter.
so anyways i have removed the rear platform that is usually in a van, the seats are gone, the bonnet will be gone soon and the door cards are in shreds! I have also aquired all of the fittings and fixtures to put seats in the back
anyways, onto the update...........to get the car MOT'd i would have to have replaced the two front tyres. So i thought i would put on my 16" Rs7's that i had laying around! They will still be refurbed when i can afford it, but for now they can go on the diesel
How Close
yes the scratch will be sorted.......eventually, and a few bits and pieces to be do0ne and it should be MOT'd!!
Comments as usual
so anyways i have removed the rear platform that is usually in a van, the seats are gone, the bonnet will be gone soon and the door cards are in shreds! I have also aquired all of the fittings and fixtures to put seats in the back
anyways, onto the update...........to get the car MOT'd i would have to have replaced the two front tyres. So i thought i would put on my 16" Rs7's that i had laying around! They will still be refurbed when i can afford it, but for now they can go on the diesel
How Close
yes the scratch will be sorted.......eventually, and a few bits and pieces to be do0ne and it should be MOT'd!!
Comments as usual
- Ghost
- Elite Post Master
- Posts: 7199
- Joined: Sun Feb 15, 2004 10:11 pm
please don't say that black plastic tie in the bottom pick is holding the bumper on?
< Pete >< Peugeot 306 1.9 DTurbo >< 118bhp 155 lb/ft >< FOR SALE £1000 >
- musicdrummer42
- Elite Post Master
- Posts: 1556
- Joined: Wed Oct 20, 2004 2:26 pm
- Location: Scarborough/Huddersfield uni
sleeky :Its from the cross...it must be dodgy (no offence to anyone from there)
Quick release front bumper, ingenious!
Wheels are cool my man
Lee.
ta very mooch, need to get rid of me recaros, then ill be spending some more cash
still havent got the V5 back btw, still could be dodgy, but i know the guy, so ill be in contact with the police if it aint
dont think he would have sold it to me if it was
- Ghost
- Elite Post Master
- Posts: 7199
- Joined: Sun Feb 15, 2004 10:11 pm
Cellze :Wheels look good will be even better once refurbed, you will end up finishing the van with all the parts for your car and then you never get the car finished
Cellze
ill take these off when i get them refurbed and stick the GTi's on put the FRST ones on the petrol while all this is happening.
im taking the interior out of the petrol and sticking it in the desiel
- Ghost
- Elite Post Master
- Posts: 7199
- Joined: Sun Feb 15, 2004 10:11 pm
right put the back on.........fronts are at perfect ride height, minimal scrubbage............the rears......fook me!
way to low, took it round the block and have about 3mm out of the side wall
anyways, ill be cutting it up when i get the other suspension, and hopefully will raise the back slightly otherwise im going to have to get different springs
anywho, pics..........
way to low, took it round the block and have about 3mm out of the side wall
anyways, ill be cutting it up when i get the other suspension, and hopefully will raise the back slightly otherwise im going to have to get different springs
anywho, pics..........
- Ghost
- Elite Post Master
- Posts: 7199
- Joined: Sun Feb 15, 2004 10:11 pm
looking nice, got some real potential
MotorcyclesFish :The thing is if I caught Brian fudgekin a bloke, I wouldn't think 'oh Brian's a gay', I'd think 'Brian that fudgekin weird haired mongoloid is raping a gay to see if anyone finds it funny'
- Rhinopower
- Elite Post Master
- Posts: 6466
- Joined: Wed Oct 08, 2003 9:41 am
- Your car: Volvo FH330
Car: 1983 Ford Escort
sleeky :Shame you cant run it that low because it looks fooking mint
How about cutting the arches right back then fitting 2i arches to cover up the mess?
Lee.
that will be done when the new sus gets put on..............but im not sure if i like it that low on the back, but then again each side is sitting different at the moment, think some of the sus is destroyed
im really starting to fall in love with the shape of the si bumpers............but i think im gonna need to get new ones, as these are deffinatly aftermarket and are s**t!
cheers for the nice replies
- Ghost
- Elite Post Master
- Posts: 7199
- Joined: Sun Feb 15, 2004 10:11 pm
Mate, those wheels have done incredible things for that car. Already it looks pretty damn good!
My name is Alex. I used to have a Capri. I don't anymore. But I'm still called Capri.
- Capri
- Elite Post Master
- Posts: 13015
- Joined: Sun Dec 09, 2001 12:00 am
- Location: Tunbridge Wells
- Your car: 1989 Citroen BX GTi 16v
Twitter
The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R
17:44, 4th December 2021 Twitter Web App
To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP
17:42, 4th December 2021 Twitter Web App
Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/
Facebook
New article! fiestaturbo.com is 20 years old this year and I'm writing a series delving into the history of it. …
Saturday, 4th December 2021 12:49
Some awesome Escorts from the Fair - FORD FAIR 2021: ESCORT EXHIBITION - …
Sunday, 31st October 2021 17:05
All the best Focuses from Ford Fair - FORD FAIR 2021: FOCUS PEEKING - Which was your …
Thursday, 7th October 2021 22:21
Become a fan:
http://www.facebook.com/fiestaturbo/
RSS Feeds
Subscribe to the RSS feed
What is RSS?
RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.
To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.