teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Post pics of your Fiesta here.

Re: teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Postby bassboy on Thu Nov 07, 2013 8:30 pm

Right, where do I begin!!!

Firstly, I havent been overly active with the CLS over the last months, just simply getting on with little bits here and there mainly down to continual growth of the business etc so getting more and more cars coming in all the time.

The main bits that I have done, is just get it to a better standard! Changing bits that weren't up to my standard or I felt can be better.

On the whole, the car is pretty much the same!

Lets catch up with show season...

Shows attended this year were;

DC (Best Mercedes)
Players Classic
Modified Nationals
Westside
Ace Cafe German and Passionford Meets
All Dubs

Cant remember any others!

So some pics through the season...

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

So thats show season done! We were meant to go to Show and Glow, but after hearing the weather was meant to be bad, I decided to give it a miss and had a nice day off instead!

Now, onto the bits that I have changed!

Due to the EXCESSIVE camber I run (was measured at over 4degrees!) and the Toe settings being out, my front tyres shredding themselves in around 1500 miles!! Painful especially on a set of Bridgestones! I wanted to change them regardless however due to wanted to trim down the tyre size a tad as I couldnt drive the car as low as I wanted on the front.

Tyre size has now gone from 235/35 to 225/35. Im MUCH happier with the new toe settings and the 225's as the steering is like a feather now!

Check the insides of the tyre!!!
Image

Next up was a service! I havent serviced the car since I bought it and felt like doing it just to keep on top of it...The previous owner/garage said they had just serviced it before I got it....all I can say is LIARS!!!! I dont think this is the state of an air filter after less than 5000miles!
Image

Other side
Image

Right...dinners ready now lol!
Image
bassboy
Authorised Trader
Authorised Trader
 
Posts: 7494
Joined: Thu Jan 01, 1970 1:00 am
Location: fiestaturbo.com

Re: teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Postby bassboy on Thu Dec 12, 2013 9:13 pm

Since I had bought the car, I periodically had an error message saying Battery or something, so it was about time I did something about it as it started to come on more frequently.

As I have 2 batteries in the rear of the vehicle, one OEM battery and another XS Power D2400 battery to help spread the load, I knew it wouldn't be showing an error from the rear batteries, which only left the front aux battery.

When I removed all the bits to access the front battery, I noticed it was the original MB battery from new. Not bad considering these are meant to have 3-4 years life in them.

As per my normal actions, once the battery etc had been removed, I cleaned EVERYTHING out and got rid of any leaves, dirt and grime from the area and then waxed it all!

Image

As per the instructions, I had to fill the battery up with the supplied distilled water and let it settle for 20minutes before giving the battery a full charge. In its charge state, the battery now floated at around 12.9v. Perfect!

Then as I went to fit it, as normal, the terminals would not fit! So after a few modifications, I got everything to fit and was on my way to finish the installation.

Image

Image

Image

All back to normal with a new pollen filter to
Image

Next up, I bought a set of AMG stainless door pins as I didn't really like the look of the plastic ones.
Image

Image

Image


The big change in the interior was the addition of a brand new Genuine AMG steering wheel and AMG paddle shift conversion
Image

Image

Image

Image

I also got a custom Carbon AMG gear lever which I have not seen many if any about. Apparently it was made in Sweden according to the guy I bought it off
Image

Ill get some better photos of it later.

Im just downloading some more pics so ill be back with an update shortly
Image
bassboy
Authorised Trader
Authorised Trader
 
Posts: 7494
Joined: Thu Jan 01, 1970 1:00 am
Location: fiestaturbo.com

Re: teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Postby bassboy on Fri Dec 13, 2013 7:15 pm

Next up was time to clean the seats…now, anyone who has seen the interior of the car will know its relatively clean. However, most people associate 'shiny' leather with 'clean' leather, you couldn't be more wrong!

Leather in its natural colour, will have a matt like finish to it and not feel slippery etc.

Now, I'm guessing the previous owners of the vehicle looked after it quite well but fell under the category of people thinking shiny leather is great.

My rear seats out and ready to clean…before
Image

After
Image

Clean on the left vs untouched on the right
Image

Image

Image

Image

Image

Image

Image

Front seats
Image

Image

Image

Image

Image

A quick reflection shot of the CLS with my Previa (Project DFN U) in the background

Image

Some more of the gear knob
Image

Image

teamSPB
Image
bassboy
Authorised Trader
Authorised Trader
 
Posts: 7494
Joined: Thu Jan 01, 1970 1:00 am
Location: fiestaturbo.com

Re: teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Postby bassboy on Sat Dec 14, 2013 9:00 pm

Recently I have noticed my headlights bulbs have been pretty poor at lighting up the road so I have been looking into getting replacements. I LOVE the Ring Sportz Blue bulbs I had in there, but thinking they have trouble with projector style lamps (As we have had this issue on a Corsa with projector style headlights), I decided to update the car further more. I wanted the bi-xenons but can't find them for the love of God!

I decided instead to use some 55w HID's in 6000k temperature/colour. Looks very OEM and looks exactly like the Xenon equipped cars. Further more, no error lights at all!

55w HID vs 80w Ring Sportz Blue
Image

Image

Next up, I wanted to change the wing mirror for later spec items, I found a set on offer and snapped them up!

Big thanks to 'television' for sending me the instructions on the wing mirrors!

Old vs New
Image

Image

Wing mirror covers removed and looking dirty
Image

It was all washed down and given two layers of Poor Boys Bare Bones for protection

New mirrors on
Image

LED lights on the bottom to fully working
Image

Image

Image

Image

teamSPB
Image
bassboy
Authorised Trader
Authorised Trader
 
Posts: 7494
Joined: Thu Jan 01, 1970 1:00 am
Location: fiestaturbo.com

Re: teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Postby bassboy on Mon Jan 06, 2014 6:00 pm

As someone noticed, the number plate has been changed also…The new plate which spells out 'DROPPED' was bought as a birthday present and the plates themselves were sourced from a company in Northern Ireland.

However, when I received the plated, the rear one was off centre so I got a replacement sent out. FANTASTIC service when I initially ordered the plates (Ordered on friday or thursday and were were on saturday)…not so great when I wanted a replacement as it took around 7 working days to turn up!

Image

Its only very slight but you did notice it on a small plate
Image

Image

Size comparison between stock plate and shortened plate
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Image
bassboy
Authorised Trader
Authorised Trader
 
Posts: 7494
Joined: Thu Jan 01, 1970 1:00 am
Location: fiestaturbo.com

Re: teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Postby bassboy on Fri Jan 17, 2014 12:13 am

Its amazing where I started…

Image

And where I am now!!
Image
Image
bassboy
Authorised Trader
Authorised Trader
 
Posts: 7494
Joined: Thu Jan 01, 1970 1:00 am
Location: fiestaturbo.com

Re: teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Postby bassboy on Wed Jan 22, 2014 4:16 pm

Thats a BIG package!!

Image
Image
bassboy
Authorised Trader
Authorised Trader
 
Posts: 7494
Joined: Thu Jan 01, 1970 1:00 am
Location: fiestaturbo.com

Re: teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Postby SLEEMAN on Wed Jan 22, 2014 9:22 pm

is it a new bumper lol
SLEEMAN
Post Master
Post Master
 
Posts: 739
Joined: Wed Dec 17, 2008 2:01 am
Location: Hemel Hempstead, Hertfordshire

Re: teamSPB's New Project...Mercedes CLS...iPad mini, hydraulics

Postby Excursion on Thu Jan 23, 2014 10:11 am

PD600 'Aerodynamic-Kit'?
Excursion
Bulletin Board User
Bulletin Board User
User avatar
Posts: 15265
Joined: Thu Jan 01, 1970 1:00 am
Location: Skynet
Your car: Ford Fiesta

Car: 1990 Ford Fiesta XR2i

Previous

Twitter

The second 20th Anniversary article, a dive into the history of how the site came about is available here: https://t.co/kbCfZ4sf0R

17:44, 4th December 2021 Twitter Web App

To celebrate https://t.co/wXVkvJipaS being 20 years old this year, I've written a series of articles detailing the… https://t.co/B0vE0Y3KvP

17:42, 4th December 2021 Twitter Web App

Follow fiestaturbo.com on Twitter:
http://twitter.com/fiestaturbo/

RSS Feeds

Subscribe to the RSS feed

What is RSS?

RSS is a technology that lets you use special applications or modern browsers to notify you you when a site is updated. You can then read the updated content in that application or your browser.

To subscribe to these RSS feeds you need to copy the links above. For instructions on how to add it to the feeds you keep track of, consult the documentation of your RSS reader.