fiestaturbo.com

[jonyb4]

lol nope it wont

seen the prices?

the idea i had consisted of a 90 bend, straight pipe, 45 bend straight pipe, and another 45 bend (down to the back of the bumper) maf inline and then filter

comes to around £50 using cheaper ebay silicone joiner and proper edged pipes

[- Danny Boy -]

Yup sure is expensive!

Thats why I was looking 2nd hand. But I might be able to get a whole pipe made custom to how I want on the cheap/free. We shall see though.

[Rhinopower]

meaning?

go to combe on the 28th and you will see it...

danny you should never have used that imo, why cant a original cross over the temp, and temp means temp not months on end
ive been planning a custom inlet pipe for years myself...

I'm going to coombe on the 28th for a few sessions, I've never driven there before either, but I do expect to lap you lol

I will avoid doing this again

[knuckles]

danny ...

why dont you refit the standard zetec plastic air intake for the time being ?
or do you really hate it that much ?

my 2.0 went like stink with it

[- Danny Boy -]

danny ...

why dont you refiit the standard zetec plastic air intake for the time being ?
or do you really hate it that much ?

my 2.0 went like stink with it

1) I dont have one. Don't know where my original one went. Probably left it at my mums house when I moved out couple of years ago and I expect she binned it.
2) I do hate it yes lol

For now I will just leave it like this. It runs perfect, pulls very hard and fast too. It shouldn't be on there for long, a week or 2 max if things go well.

I know its not ideal and it does look s**t, but all I can think at the moment is 'f**k it' lol.

[jayrs]

i got a std plastic inlet pipe mate, will be listed for sale with the rest of the stuff when i finish sorting it out

[- Danny Boy -]

Cheers, but I'm good mate

Need to save the pennies for the inlet pipe that I might be getting made up lol.

[hb69]

meaning?

go to combe on the 28th and you will see it...

danny you should never have used that imo, why cant a original cross over the temp, and temp means temp not months on end
ive been planning a custom inlet pipe for years myself...

I'm going to coombe on the 28th for a few sessions, I've never driven there before either, but I do expect to lap you lol

I will avoid doing this again

A happy coming together of ballbag and door handle

[jonyb4]

as much as i love my door handles date with a ballbag do we need that popping up multiple times? doubt its danny's idea of a car thread



danny a crossover is better than that surely?!

as said theyre proven to give good power, especially on a standard motor mate


lapping me fore sure ryan, i aint gonna step in the way of 170 odd break am i
should be good though, hand on the railings for the first lap or two

and id like it if my car was rape free this year lol

[jayrs]

Cheers, but I'm good mate

Need to save the pennies for the inlet pipe that I might be getting made up lol.

no worries mate

[- Danny Boy -]

How many times... its fudgekin temporary. Jesus christ. I'm getting bored of saying it now.

No more chat about 'oh a standard pipe would be better' blah blah blah... maybe it would have been. Who gives a s**t. I clearly dont otherwise I would have gotten one rather than made a fudgekin joke of an inlet pipe.

I only updated it with this s**t just to see who would have a laugh with me about it... Seems no one has a sense of humour on here anymore. At least on other forums everyone understood and was having a laugh about it with me.

Yeah fair enough people try and advise you on the best alternative sometimes... but everyone just need to lighten up a little sometimes instead of banging on about the same s**t over and over again - mainly you jony tbh, seeing as you kept on about it in 3 or 4 of your replies... all after I have said 1) its temporary bodge 2) im getting a proper pipe made up.

I think I will just go back to updating this with serious 'proper' updates rather than random s**t (like this) for a laugh like I do on other forums

[Rhinopower]

I think it's funny

[Ratspeed]

You thought about using a standard inlet pipe? that looks s**t

[jonyb4]

You thought about using a standard inlet pipe? that looks s**t

ok thats funny but hes clearly had enough of it lol
matt being a bad ass and not giving a toot

im just saying dan, dw it then, if it goes funlumps up again just add more tape


saying this sites lot its sense of humor is a sham, i completely agree otherwise

[- Danny Boy -]

I know it looks s**t!

I couldn't care less at the moment. Got more important things in life to worry about than a temporary bodge of an inlet pipe

I think it's funny

Ryan, you are my hero.

if it goes funlumps up again just add more tape

Hurrah! Finally, the humour I was expecting from the start!

MOAR TAPE!

[jonyb4]

i thought his name was ryan?

[- Danny Boy -]

Yeah it is... was. lol

Watching family guy, writing Ryan... turned into Brian. What an idiot.

[knuckles]

i thought his name was ryan?

so did i

im sorry for my comment danny

[- Danny Boy -]

i thought his name was ryan?

so did i

im sorry for my comment danny

Changed it now. Reason is above

Don't be sorry

[dontpannic]

Definite LOL bodge, however (sensible side of me here), if the tube is made from fur, is it furry inside? I'd just be concerned about sucking up rouge bits of fur into the TB

[- Danny Boy -]

Its not furry as such, its just a fabric. Thats the only way to describe it really. If stuff gets sucked in, then so be it lol. I will give it all a good clean out when I change it over anyway, I always do if I take it off for whatever reason, so its always clean inside. Same with the MAF sensor and other bits and bobs

I'm not going to be driving the car loads over the next few days, so its not much to worry about.

I could have just been sensible and stuck the K&N banana pipe back on there, but I hate how s**t it is and sucks it self shut. What if I wanted to race a ferrari and beat it off the lights!?

[fiestasiphil]

cracking bodge dan if it works thats what bodges are all about nice work

[dontpannic]

Its not furry as such, its just a fabric. Thats the only way to describe it really. If stuff gets sucked in, then so be it lol. I will give it all a good clean out when I change it over anyway, I always do if I take it off for whatever reason, so its always clean inside. Same with the MAF sensor and other bits and bobs

I'm not going to be driving the car loads over the next few days, so its not much to worry about.

I could have just been sensible and stuck the K&N banana pipe back on there, but I hate how s**t it is and sucks it self shut. What if I wanted to race a ferrari and beat it off the lights!?

I mean the fabric does bring the car over the 800bhp mark doesn't it? The K&N only adds a maximum of 100bhp when sucked shut. The only way you wouldn't beat the Ferrari is if the Ferrari also had a fabric air feed pipe.

[hb69]

Its a zetec isnt it? Should blow up at 100,000 miles, exactly.

[russ-RST]

Lol top quality engineering at its best... its not sit tight and sucks in from everywhere ! I know what will sort it!!! more tape you do crack me up! il take 3 of em on a serious note altho it might not look better than what it was that you replaced I bet it's a better build quality cars looking good matey , hope you get things sorted wanna see this at some shows

[russ-RST]

Its a zetec isnt it? Should blow up at 100,000 miles, exactly.

na should be around 99,999 iirc

[dontpannic]

Its a zetec isnt it? Should blow up at 100,000 miles, exactly.

Yeah, even if you're on the motorway, as soon as it hits 100,000 miles the car will just stop dead where you are. You might as well walk home from then.

[Minstral]

Sick mod Danny

[- Danny Boy -]

Well the car is nearly 1,000 miles over due blowing up! But, the engine iself is only on about 70k, so I have a good 30,000 miles to do yet. I'll try do it by the end of the week. It will be tough, but if I go ferrari hunting for the next couple of days I might be able to make 30k!

Lol top quality engineering at its best... its not sit tight and sucks in from everywhere ! I know what will sort it!!! more tape you do crack me up! il take 3 of em on a serious note altho it might not look better than what it was that you replaced I bet it's a better build quality cars looking good matey , hope you get things sorted wanna see this at some shows

MOAR TAPE! lol. Yeah it is better quality. Its gone from a K&N banana pipe which sucked itself shut under load > a fudgekin lol bodge > a slightly better lol bodge.


I already have a proper setup lined up. Told you lot it would be temporary

Might try see if I can stick the air filter out of the fog light hole with the next setup. It will be perfect, the cold air will get directly to the filter, which means more power, also, when it rains, it will suck up water, that means the engine will have its own 'water cooling' system like race cars too. Although theres is more technical because its injects water, mine just sucks it all up, so really because mine is sucking up as much as it can, it should keep the engine extra cool. And we all know how your not allowed to let the engine get hot because that can cause all sorts of problems!

[- Danny Boy -]

Some fudgekin pictures of the car because it was sunny and I was bored.

[Gmc]

im selling a k&n inlet pipe if its any use to you?

[- Danny Boy -]

Just taken one off because it sucks itself shut when you floor it

Got silicone joiners and chrome piping coming soon so its all good.

[jonyb4]

haha think that was a troll

[Tweek]

No wonder you' ve got no money with that gurt yacht sitting there. You need to get ridda that

Looking good though, need to get it on some more FT stands and stick FT stickers on it

[- Danny Boy -]

Yeah thats where all my money goes these days!

I know I do, I'm sorry