fiestaturbo.com

[jonyb4]

its not like im the one claiming i spin wheels from normal road driving... get real will you

[- Danny Boy -]

Neither am I? At what point did I say that?

Perhaps you need to start reading things properly and also use your brain about things like contact area on the tyre while there is loads of negative camber, logic would say when you floor it in the wet, you will spin the wheels up. But no, you don't seem to read things properly then pick out one little bit going off about how I've boasted that I have a million horspower or s**t tyres.

Also, stop picking at things which you clearly have wrong in the first place trying to get one up on everyone. That's twice in one day already! Facebook and on here. It gets you no where and loses you respect. You know this Jony!

Before you sit there getting worked up about that I have just said, think about what you are going to say rather than button smash the keyboard in anger posting a reply

[Tweek]

[- Danny Boy -]

[jonyb4]

sorry i jumped the gun, you right since you say you can no longer spin the wheels now your camber is sorted...

post all them videos and pics you want, im not letting you get to me, you just look stupid lol

[- Danny Boy -]

There you go again, being a complete tit. Like I said, at what point did I say under normal driving conditions I used to spin the wheels up? I didn't. Oh there we go, we established the point it must have been when I floored it. Because generally when you test things, you give it some! Correct? Yes.

HOORAH! We got somewhere!

[~nomad~]

Carry on Jony....

Every now and then you do the same thing, gob off and then cry when the pisstaking starts. Stop it.

[dontpannic]

Mine spins up in the wet.

[GRP16V]

one Q.:

- which class of screw/bolt , do u took for the lower arms ?

looks like 8.8 ?

[- Danny Boy -]

Yeah 8.8

[GRP16V]

ok,

and the lower arm pinch bolt from Ford ?
( should be 10.9 )

[- Danny Boy -]

Not sure, don't think they have a marking on them. I've not checked them to see, so couldn't tell you.

[rsturbonutter]

You will be needing the 10.9 though Danny as the 8.8 are likely to snap under the kind of loads applied when going over bumps or cornering hard.

[- Danny Boy -]

I'll grab some 10.9 or higher then. I only had 8.8's to hand so used them.

But, Ian Howell supplies 8.8's with his lower arms that he supplies from the pictures that I have seen, so if he of all people supplies them, they must be good enough? I'm not arguing, I'm just raising a point

[Excursion]

Actually guys, the pinch bolt will be 8.8 hence being zinc plated. It's not under any real force; it just has to hold the weight of the wheel assembly.

[jonyb4]

what he said

they just stop the notched ball joint pulling out

[- Danny Boy -]

I actually washed my car for the first time in a few months. I missed the white wheels

Few pics, nothing more, nothing less.

[Rs Adz]

nice pics very arty

[jayrs]

looks spanking mate, love it

[Dave5300]

looks really good, nice one

[GRP16V]

brilliant,

looks like for a Mag

Did u have a ladder with you , for the "high" pics ?

[Fraggle]

Gotta be my favourite si on the scene this one, looks lovely fella

[- Danny Boy -]

Cheers for the comments guys

brilliant,

looks like for a Mag

Did u have a ladder with you , for the "high" pics ?

No, I had my camera tripod with me for them shots. I put the camera on the tripod, manually focused the camera on the car, set a shutter timer and held the tripod above my head. Took a few goes to get the picture I wanted but I got there in the end

[dontpannic]

Looks good Danny.

This would look 463% better though.



Still not sold on the white wheels on it when everything else is dark.

[- Danny Boy -]

I know what you mean Nick! I was having the exact conversation with someone yesterday about spraying the wheels black with some plasti dip stuff to see how it looks.

But it'll make the car look so dark and the white gives it some contrast. I know its insane contrast lol.

I am playing with the idea of different wheels but having no money means I cant do it.

So for now, they will be staying

[dontpannic]

I'm thinking more Anthracite or Gunmetal, rather than black, similar sort of colour to your front splitter

[Michael!]

do you have to change the passenger side rear light for mot's?

[- Danny Boy -]

I'm thinking more Anthracite or Gunmetal, rather than black, similar sort of colour to your front splitter

Yeah it'll look better not being so dark. I'll see about it in the future

do you have to change the passenger side rear light for mot's?

Nope. A reverse light isn't a legal requirement

[Michael!]

i didnt know that! im thinking about doing something similar so was just wondering

[jonyb4]

take bulb out so it doesnt show red though!


i agree with nick, but not black, black GTi wheels look cheap and s**t, a nice dark metallic grey would be lovely

[hb69]

Danny your updates are better than mine

My zs also spins up in the wet and it has about 2bhp

[- Danny Boy -]

I do put a lot of effort into my updates, I mean, I have to take pictures, upload them to photobucket and then copy and paste the links on here. It's a lot of hard work but I am glad it pays off to be better than someones on here. Makes me feel like the whole effort was worth it!

Mine spins up like a Bic™ in the wet at the moment... inner edges of the tyres are smooooooooooooth from before I fitted the camber adjustable lower arms, plus the tracking was out too. S'all good though, it'll have new tyres soon!

[Excursion]

I actually washed my car for the first time in a few months. I missed the white wheels

Few pics, nothing more, nothing less.

Good photo!

[EUFez]

I'm thinking more Anthracite or Gunmetal, rather than black, similar sort of colour to your front splitter

Definatly. Other than the colour of the wheels I can't fault this car, purrfecctt! Less is more, love it.

[- Danny Boy -]

Cheers Mark!