Popular articles and features

Fiesta History Zetec Engine Conversions Fiesta Nitrous Oxide Guide Fiesta Buying Guide

Home >> Feature Cars >> The Recaro Fiesta
Disclaimer

The Recaro Fiesta

Adrian T.'s 1990 RS Turbo

"OH... MY... GOD...!!! EIGHTEENS??!!"

This is typical of the reaction from people when they see the numbers on the sidewall of Adrian's Falkens. The guy can't believe his eyes. "But it's so low!" Adrian just smiles and replies.

"They just went straight on after I took the 17"s off"

"really?"

"Not quite, I had to tweak a few other bits as well, I'm not saying what though, 'cos then everyone will be at it!" he laughs.

"It did help that the arches had already been massively modded for the 7.5 x 17" the car used to run." A lot of you will recognise the car from previous mag features, The Revs Fiesta track day and also the fiestaturbo.com website which Adrian runs. The 18" Italia RSR's sit tightly under the cars modified arches and rubber-band like 215/35 Falken FK451s separate the rims from the tarmac by less than an inch. The Spax RSX coilovers have been wound down for a 75mm drop, leaving the top of the tyres tucked inside with no gap.

"I bought the car already heavily modified, from Steve Smith" Adrian explains, "I first saw it in a Ford mag back in 98, and I fell in love with it then. I had an XR2i at the time and what Steve had done to the car was pretty much what I wanted to do to mine" Adrian had the XR for a year before the lure of a turbo became to great. Initially looking for a standard car and with £7k to spend he began his search. "I'd just missed out on an absolute minter and just when I thinking there were no decent ones anywhere I spotted Steve's in the back of a mag. I knew I had to have it but the ad had £call and I knew it would be expensive. Despite wanting a standard one it made a lot of sense as the mods Steve had done were ones I would do anyway."

After a bit of haggling and sorting out nightmare insurance the car was sitting on Adrian's drive. "The weekend I got it I just drove round with this huge grin" he recalls "I'd never driven a turbo car before and the noises it made were fantastic".

Adrian knew exactly what he wanted to do with the car and what bits would stay and what would be replaced. The plan was to go for maximum visual impact and make it his own but still retain it's identity as one of the most famous Fiestas on the planet. "I wanted to combine some of the best Fiesta mods already seen, like the Mondeo spoiler and plate in the rear bumper with some new stuff that no-one had done before.

Almost immediatley the standard rear lights were swapped for a set of clears and the green colour coded interior parts were binned and replaced with new bits painted white. A Momo wheel and gearknob replaced the Nardia items. "Most of the parts were a few years old and starting to show their age, although there were no major faults on the car, just niggling little things like kerb marks on the rims and the odd scratch here and there".

The mods continued, flush tailgate, Samco hoses, Spax Coilovers, Mocal alloy fuel cap. The biggest change from when Steve had the car is the interior. "Another bonus buying this car was that it already had the 1992 spec black interior rather than the standard naff grey. The Recaros were retrimmed in leather and although very nice, weren't to my taste", Adrian explains "I decided to sell the seats and go for a race look" Out came the Recaros and rear bench and in their place now sit a pair of fixed back Sparco Evo buckets and 6 point harnesses anchored to the one-off Rollcentre cage. The rear seats and parcel shelf have gone, with the boot floor and seating area now covered in black carpet. "I wanted to go one better than most people so I got the proper 3" FIA harnesses with the QR realease, the cage is FISA approved as well so it's not totally for show, it fits very close to the bodywork and the original rear quarter panel trims would no longer fit. I came across these plastic trims from a Fiesta van and they are perfect for the job". The race theme continues with checker plate on the embroidered floor mats and a trio of Auto Meter gauges are on order. The final touch will be the the Armtech sequential shift lights planned, which illuminate at a preset point in the rev range to signal the optimum shift point. Unlike most race interiors Adrian has kept ICE in the car, "I'm well into my tunes, so I had to keep some in but it was a fine line between a system that would give a good sound and one that would weigh the car down too much. The speakers run off the head unit and I've not bothered with any subs, although I am tempted to get a removable box at some stage. Those door builds were too good to loose as well."

The door builds in question were fabricated by Safe & Sound in Manchester. They are moulded in fibreglass and covered in the same black vinyl as the door cards, and as a result look almost factory. 6.5" MB Quart's bump away to Alpha Breed's "Epic Future" while a pair of kick builds sit in the foot wells, dealing with the midrage through 5.5" MBs. The crossovers are located behind the kicks and the tweeters mounted on the mirror bases. The whole lot runs off the Pioneer 8000r CD headunit, complete with funky satellite and cityscape OEL animations. A multichanger is on the shopping list but in the meantime a CD wallet houses volumes 1-5 of the Dutch 'In Trance We Trust' CDs, with Reactivate 16 and 17 also making an appearance.

The front of the car hasn't changed much since it was bought, with the addition of a Laguna splitter to add some depth under the MCR item. A complete frontend makeover is due soon, new lights, bonnet, bumper and a couple of top secret tweaks that will be reavealed as and when. Popping the bonnet reaveals an expanse of chrome. Rocker cover, inlet manifold, crossover pipe, hinges, it's everywhere. Contrasting the shiny stuff is a full set of blue Samco hoses, with additional water and vaccum piping in matching silicon.

The rear bumper is the result of a fair few weekends of Adrian's handywork. It's the original RST item with the green stripe removed and the number plate flushed in. The swage lines and towhook have also been filled and the plate light has been shaved and filled and a couple of mk4 items are set into the top of the pod. The next step is to move the exhust cutout into the centre and lengthen it to accomodate a 12"x4" Carisma centre exit box which is will be mated to a the current Magnex centre section and downpipe.

The engine is fairly untouched, with the exception of the exhaust, Adrian has not tuned it at all. "I've left the engine as it is for now. I have been speccing up a 2.1 Zetec to go in this winter, and I saw little point in throwing money at an engine that will be coming out, I prefer to spend the money elsewhere on the car." The 2.1 will be based on the Series 3 2.0 16v Zetec from the Focus, and will have a hybrid T3 turbo for around 250bhp.

Adrian has no plans to sell up either "I'm nowhere near finished yet, before the engine I want to get it resprayed and seam welded then a set of 330mm front discs and Cossie calipers, rear disc conversion too. After that I fancy going back to leather Recaros and having a nice boot install, TV, DVD PSX2..." Drop us a mail when you get the 19"s on then!

Adrian T.'s 1990 RS Turbo
Engine: 4-cylinder 1600cc 8 valve, T3 Turbo, Escort RST manifold, stage one 165 chip and Collins alloy 10psi actuator, Collins Gp A dump valve, chromed rocker cover, chromed charge carrier, chromed alloy air piper, chromed inlet maifold, K&N induction kit, Pace Products fabricated alloy water radiator, blue Samco silicone boost and water hose kits, additional Samco coolant and breather hoses, Samco vacuum piping. Late spec header tank with black Mk4 cap.
Transmission: Fully rebuilt factory 5 speed manual gearbox with uprated bearings, competition spec clutch.
Exhaust: Magnex full stainless system with 3" tailpipe.
Wheels: 7.5 x 18" Italia RSR.
Tyres: 215/35 ZR18 Falken FK451.
Suspension: Spax RSX fully adjustable 2.25" race spec coilovers with 4" shorter springs for 80mm drop all round, chromed Brooklyn Ford strut brace.
Brakes: Hi-Spec 315mm cross-drilled discs with alloy bells, Escort Cosworth calipers, Mintex pads.
Exterior: Original Ford Diamond White, extensively rolled and ground arches with modified arch liners, MC Rallying front splitter, Renault Laguna lower front splitter, "flush" tailgate with filled swage lines, number plate recess filled and smoothed, rear wiper removed and hole filled, boot lock removed and hole filled, Fiesta Mk4 rear bumper with tow hook and swage line filled and smoothed, side rub strips removed, clear indicators, clear oval side repeaters and MHW clear rear clusters, "pace car" style white strobe lights in front indicators, fully smoothed and colour coded mirrors, de-locked doors and tailgate, colour coded and smoothed door handles, Mono Style centrally parked single front wiper conversion, driver side wiper hole filled and smoothed, Genuine Ford Mondeo RS Estate rear boot-top spoiler smoothed and filled into standard RST spoiler, Morette twin headlight conversion, Mocal aero style locking alloy fuel filler, white sunstrip with Recaro decal, Recaro decals on side-sills, 1996 spec Ford oval on bonnet, RS Owner’s Club number plates, standard size on rear, half size on front.
Interior: Rollcentre custom fabricated FIA International Spec rear rollcage, Sparco Evo fixed back FIA approved competition seats, Sabelt Top Formula 6 point harnesses with 3" shoulder, 2" lap straps, 2" crutch straps and aircraft style quick release buckle, FlameBeater carbon fire extinguisher, rear bench removed, boot floor and rear seating area soundproofed and carpeted, push button starter, 1995 spec RS1800 black dashboard, 1992 spec black carpet and door cards, Momo Race steering wheel, Autotint Design white dials, Momo Competizione gearknob, white colour coded detailing, Autostyle Sportmats with alloy heel plates and embroidered "RS Turbo" logo, Lockwood "RS Turbo" sill plates.
ICE: Pioneer DEH-P8000R EOL CD head unit, custom door builds housing MB Quart 6.5" mids, 5" MB Quart mids in custom kick builds, 1.5" MB Quart tweeters incorporated into wing mirrors mounts, 4" MB Quart 2-ways in rear factory mounts, Dynamat applied inside doors, rear quarter panels, boot floor and tailgate.
Thanks to: Steve Smith for selling me the car, Alex D for buying help and advice, Jay for the Magnex, Mark @ National for fitting it, Ian Howell for the brakes, Paul Stalberg for the photos, Steve Lamb, RW and Gary S for the T3, Paul R, Mike G and Ian for advice and finally Paul B for all his help!

View image 1 Zoom image
View image 2 Zoom image
View image 3 Zoom image
View image 4 Zoom image
View image 5 Zoom image
View image 6 Zoom image
View image 7 Zoom image
View image 8 Zoom image
View image 9 Zoom image
View image 10 Zoom image
View image 11 Zoom image
View image 12 Zoom image
View image 13 Zoom image
View image 14 Zoom image